|
|
The Hypro Series 5200 Big Twin® piston pump is suitable for applications in high pressure washers for industrial and agricultural cleaning needs. It is also useful as a sprayer pump to apply a wide range of chemicals.
The Series 5200 is constructed of cast iron body and cylinder heads, unitized stainless steel valve assemblies and double row ball bearing supported crankshaft.
|
|
|
Self-serve carwash and tunnel prep unit owners across the country are making the switch to Hypro’s 2300 Series plunger pumps. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.
|
|
URACA high pressure and ultra high pressure plunger pumps are outstanding in their compact design and flexible applications. Based on the industrial process pump design, the pumps are relatively unsusceptible to small particles in the tap water, even at high pressures.
Options
- Flanged housing for hydraulic drives ISO 125 / ISO 140
- Drain device
- Suction and discharge connections, optionally on left or right-hand side
- position of drive, optionally on left or right-hand side
- special designs: hot water, stainless steel, solvents
- stuffing box cooling / flushing is possible with power end cooling
- pump unit with electric or diesel drive
- pump unit suitable for pressure tests with ATEX certificate
|
|
The Hypro Series 5200 Big Twin piston pump is suitable for applications in high pressure washers for industrial and agricultural cleaning needs. It is also useful as a sprayer pump to apply a wide range of chemicals. The Series 5200 is constructed of cast iron body and cylinder heads, unitized stainless steel valve assemblies and double row ball bearing supported crankshaft.
Performance Information
- Max. flow: 10 gpm/37.9 lpm
- Max. pressure: 400 psi/27.6 bar
- Max. rated speed: 600 rpm
- Max. fluid temperature: 140°F/60°C
|
|
The Jet Edge iP55-75 is a 75-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1.5 gallons (5.7 liters) per minute to a variety of cutting, surface-preparation or cleaning tools.
Features
- High efficiency TEFC motor
- 1,500 or 1,800 nominal motor speed (rpm)
- Electronically shifted intensifiers
- Wye-Delta soft start with disconnect
- 0.5 gallon (1.9 liter) high pressure attenuator with 1.45 micron filtration
- Safety shutdown systems
- Automatic safety pressure bleed-down valve
- Thermostatically controlled cooling system
- Programmable Logic Controller (PLC) for operation and safety monitoring
- Axial piston, variable displacement, pressure-compensated hydraulic pump
- Liquid-filled pressure gauges
- UHP safety shielded tubing
|
|
|
|
|
|
Maximum Productivity, Lower Cost of Operation
Maximum productivity and low operational costs are the keys to keeping your business competitive. Flow's 55,000 psi HUSKY pump sets a new industry standard for both productivity and reliability, giving you a portable ultrahigh-pressure waterjet pump that contributes to your bottom line by allowing you to work more efficiently and take on more jobs. The HUSKY is the world's first 55,000 psi direct drive triplex pump with full pressure compensation giving you the power you need to reduce your operating costs and increase productivity on a square foot basis. Now you get Flow's proven HUSKY UHP pump with a world class Caterpillar C-9 engine that meets Tier II emission requirements, on board diagnostics and lower fuel consumption.
The 55,000 psi HUSKY is compatible with all other Flow machines, meaning no additional investment in technology is necessary to upgrade.
Benefits
Maximum productivity from 55,000 psi - the highest pressure available in the industry
Lower cost of operation gives contractors a competitive advantage when bidding on jobs
Compatible with all existing Flow industrial cleaning products
Latest technology makes 55,000 psi pump the easiest-to-use, most reliable pump in the industry
Standard Features
290 hp Caterpillar C-9 Engine, producing 210 nhp - the highest available nozzle horsepower
Automated settings for multiple tool operation
Diagnostic sensors to assist with troubleshooting and preventative maintenance
Engine meets worldwide Tier 2 emission standards
On-board water booster and filtration system
Full pressure compensation allows for multiple tool use
Triple high-pressure outlet ports
82 gallon fuel tank
Multilingual remote operator box
Small 58.5" x 102" footprint
Specifications
Operating Pressure: 55,000 psi (3,790 bar)
Maximum Flow Rate: 6.5 gpm (24.5 lpm)
Approximate Weight: 5575 lbs (2534 kg) dry
Fuel Capacity: 82 gal (310 l)
Engine: 290 hp (216 kW) Caterpillar C-9
Nozzle Horsepower: 210 nhp (157 kW) continuous duty
Speed: 2,100 rpm continuous duty
Water Filtration: 10 micron absolute
Mounting Type: Skid or optional trailer mount
|
|
The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation.
Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.
|
|
| ... products without technical information |
| |
Ideal for electrical/electronic and fine parts
Cleans and degreases delicate precision mechanisms
Penetrating action removes oil, grease, dirt,
flux and other contaminants
Does not contain chlorinated solvents
Low odor
Fast evaporation
No residue
Safe on metal, plastic, rubber, paint, fabric
and glass surfaces
Approved by Agriculture Canada for use in
food processing plants
Inverta Spray Valve lets you spray in
an upright or inverted position
NSF registered category K2
|
|
CLEAN-setral-AN/U - Multi-purpose high-performance cleaner for industry and work-shops.
For residue-free basic cleaning prior to relubrication of maschine components. Removal of grease, oil, resin, dirt and remains of sealings. Product should not be used under electric potential. Product should evaporate completely, as otherwise fire risk exists.
Advantages:
* Cleans quickly and thoroughly
* Leaves no residue
* Economical in use
* Free from chlorinated hydrocarbons
|
|
|
LubTool 4000 is a highly effective cleaning spray by the combination of several cleaning-active active substances unusually effectively against most diverse contamination proceeds. LubTool 4000 for the distance of verharzten oil and fat remainders is particularly suitable. Use they LubToo also for problems with lacquers, colors and coloured pencil markings like also general contamination at engines and machines.
|
|
- Electra Clean Spray: Ideal for electrical and electronic fine parts. Cleans and degreases delicate mechanisms. Removes light greases, oils, dirt and organic soils. Quick evaporation. Safe to use on most surfaces. Non conductive. Fast penetration. Superior wetting action. No rinsing and no residue. NSF K2 Registered
- Foam Cleaner Spray: Foaming action - pleasant and economical to use. Ideal for all non-porous surfaces. NSF A1 Registered
- Industrial Cleaner Rapid Dry: Multi purpose cleaner. Fast evaporation. Safe on metals, most plastics and paints
- Heavy Duty Cleaner: Lifts grease and grime so that the resulting residue can be easily removed.
|
|
Heavy-duty performance
Power blast spray
Nonflammable
Nonchlorinated
Nonconductive
Fast Evaporating
No rinsing
No residue
Safe on Most metals (as per MIL-T-81533A)
NSF registered category C1
|
|
|
|
|
|
WEICON TFT/LCD Screen-Cleaner
The ideal product for the cleaning and care even of sensitive plastic and glass surfaces. It removes dirt, dust, grease and nicotine and cleans carefully without leaving residues.
WEICON Brake Cleaner
WEICON Brake Cleaner is a multi-purpose cleaner especially for the automotive sector. It quickly cleans and degreases metals, glass, ceramics and many plastics without leaving residues.
WEICON Burner Cleaner
WEICON Burner Cleaner is especially formulated to remove grease, oil, soot and other dirt accumulations from burner parts. WEICON Burner Cleaner leaves no residues.
WEICON Cleaner Spray S
WEICON Cleaner Spray S degreases and cleans all metals, ceramics, glass and most plastics.WEICON Cleaner Spray S evaporates quickly and, unlike thinners, cleans without leaving residues.
WEICON Compressed-Air Spray
WEICON Compressed-Air Spray is used where traditional methods of dust clean-up would not work, as on parts of difficult access. It allows to dedust corners and sensible surfaces in a dry and contact-free way.
|
|
|
SURFACE CLEANER is a combination of solvents specially blended to aid in the preparation of new and used molds/tools prior to treatment with Zyvax ZYVAX MOLD CONDITIONERS AND RELEASE AGENTS.
|
|
Flux Remover
Ref: FRC
Non-flammable
Low VOC
Effective %u2018no-clean' fluxes and many water based fluxes and p astes
Rapid cleaning and fast evaporation rate
Residue free
Plastics-safe
|
|
DEXCEL BIO 3000 L removes polyurethanes in low-pressure mixing heads.
Its constituents are acting in a synergistic manner to wash out and to strip thoroughly the mixture of isocyanates and polyols which are polymerising in the low-pressure mixing heads (production of polyurethanes).
Its formula improves safety, it replaces dangerous solvents and inefficient cleaners.
This product is biotechnologic, mainly based on materials coming from agrochemistry and is non hasardous for environment and health.
|
|
Azeotropic fluid, slightly odorous, with high solvency power, that makes the elimination of non crosslinked polymers possible.
Biodegradable. Can be used in the area of food.
Allows the elimination of residual traces with rag on screws of polymers extrusion but also on moulds, machines or their environment.
Very good solvent of contact adhesives as well as resins crosslinking under UV.
DEXCEL SL 80 is very effective on carboxyalkyles celluloses.
|
|
General-purpose solvent that is active on a large range of inks.
Very low odour, light note of citrus fruits.
Fast evaporation speed, avoids deceleration of printing rates.
Clearly reduces rejects during machines restarting.
Excellent decantation of inks in collecting trays.
Adapted for cleanings with a sprinkling cleaning machine.
Improves safety thanks to its flash point.
Improves health : guaranteed free from toxic or irritating raw materials.
DEXCEL SERIMAX R is efficient on alkyds resins like urethans modified alkyd
resins.
|
|
BIOSANE T 222 is a technical fluid of degreasing, ultra-pure, whose
physicochemical characteristics are directly comparable to chlorinated
solvents. Moreover, it solves the disadvantages in the field of toxicology
and environment.
SUBSTITUTE TO CHLORINATED SOLVENTS
GUARANTEED WITHOUT HCFC 141 B, FREE FROM CHLORINE
GUARANTEED WITHOUT GLYCOL ETHER
EVAPORATION SPEED ULTRA-FAST
HIGH SOLVENCY POWER
COMPATIBLE WITH THE MAJORITY OF PLASTIC MATERIALS
STRONG CAPACITY OF DECANTATION
For more information, please consult www.mmcc.fr
|
|
DETERNET C 300 is a special "hard cleanings" detergent which is suitable for elimination of all kinds of pollutions. It is particularly recommended for ink and resin cleanings.
DETERNET C 300 is an autoactive system with remover, cleaner, washer, degreaser and disincrustant power.
|
|
Electronic Cleaning Solvent Plus
Ref: ECSP
Super fast evaporating cleaning solvent
Removes grease, dirt and most fluxes
Completely residue-free
Highly flammable - not to be used on live equipment
|
|
Degreaser and cleaner for unpolymerised resin residues.
Used only at room temperature, Moulnet 888 increases the release agent adhesion and the number of releases.
Advantages
Degreases thoroughly all surfaces
Helps the release agent application
Improves mould release agent performances
Suitable for plastic, metallic and composite moulds
Does not damage the mould
Properties
Colourless liquid
Boiling point : 80 °C
Inflammable
|
|
|
HCFC Free cleaner ideal for sensitive electrical and electronic parts. The nonconductive and noncorrosive cleaner dries in seconds with no rinsing required. Removes grease, oil and other surface contaminants. Safe on all metal surfaces and many plastics. Level 1*
|
|
Fuchs proposes a complete range of detergents and solvents of high technologies for industrial degreasing.
The offer of industrial detergents also includes/understands products of paint preparation and scouring.
|
|
ConcreteMedic® Concrete Cleaner & Conditioner is a unique combination of natural ingredients designed to form a water insoluble and dirt-repellent barrier on polished concrete while improving its appearance and extending the life of the polish. Cleans and conditions polished concrete. Utilizes special fatty acids not found in inexpensive standard "soaps". A proven product used by leading concrete contractors.
In wet applications, adding Cleaner and Conditioner with Diamond Life Extender while polishing provides additional diamond life and increased finished clarity. When added to the solution tank, the Diamond Life Extender provides additional lubrication for the diamonds, thereby decreasing wear and increasing efficiency. In addition, Diamond Life Extender facilitates easy clean-up of grinding slurry by chemically binding the loose minerals for easier removal.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
