|
|
|
AccuStream intensifier waterjet machines give you a choice of 30-, 50-, 75- 100- or 150-horsepower units with adjustable pressures up to 60,000 psi. All AccuStream waterjet machines feature the AccuStream-built AIT Technology for maximum cut pressures and peak performance under the most demanding applications.
|
|
|
|
|
|
The direct drive pump operates in the same manner as a low-pressure "pressure washer" that you may have used to pressure wash a house or deck prior to repainting. It is a triplex pump that gets the movement of the three plungers directly from the electric motor. These pumps are gaining acceptance in the waterjet industry due to their simplicity. At the time of this writing, direct drive pumps can deliver a maximum continuous operating pressure 10 to 25% lower than intensifier pumps units (20k to 50k for direct drive, 40k to 60k for intensifiers).
Only Flow manufactures both HyPlexTM and intensifier pumps. As a result, we can offer you the pump solution that is best suited for your application. Whether you run 24 hour, 7 days a week production or prototype jobs only a few hours a day, we have the right pump for you. Best of all, no matter which style of pump you choose, you'll receive a Flow pump that is reliable, simple, efficient, and easy to maintain. The focus of all our designs is performance, reliability and longevity so that your productivity is increased.
Flow Pumps Operate At Higher Pressures
Flow intensifier pumps are rated at 60,000 psi and our systems actually run at that pressure. No backing off, no hedging. It's another big reason why Flow equipment out-produces all others. Flow manufacturers the most complete range of ultrahigh-pressure waterjet pumps in the industry. From 205 hp, 6.5 gpm diesel powered Husky pumps for surface preparation to 100,000 psi pumps used for ultrahigh-pressure food processing to intensifier and direct drive pumps for waterjet cutting, Flow has a pump to meet your needs. Flow is the only waterjet company to offer its customers a choice of intensifier or HyPlex(direct drive) waterjet cutting pump technology. The wide range of waterjet pumps Flow builds is your assurance that you and your application will be paired with a pump that is specifically tailored to meet your needs.
Our waterjet cutting pumps set the industry standard for performance and reliability that is proven in 24 hour, 365 day a year operations around the world. All Flow pumps are capable of smooth, continuous operation, year after year, at the pressure they are rated. This ensures you receive the maximum possible benefit of pump's capacity and the performance you have paid for. It's an important distinction to make, because a pump's performance is limited by the lowest pressure it reaches in a cycle. By operating smoothly with a minimum of pressure fluctuations at the highest rated pressure a Flow pump can outperform other pumps which are rated for high pressures, but don't necessarily operate there smoothly or continually.
|
|
The Resato Powerjet PJE waterjet cutting pump is an example of our continuing commitment to research and development.
The latest generation of our skillfully designed waterjet cutting pumps offers monitor control and simple time-saving servicing possibilities. Proven reliability reduces down-time to a minimum and the operation costs will be reduced accordingly. As a result of further developments and tests in our cutting laboratory, the life cycle of high pressure seals and other parts subject to wear has been extended considerably.
To complement our extensive range of waterjet cutting pumps we offer all waterjet cutting accessories vital to the realization of a turn-key cutting system.
|
|
Ideal for use in remote and/or mobile locations where electricity is scarce, the iP55-280DS is powered by a 280hp Cummins turbo diesel engine that meets Tier 3 emissions standards. It is capable of producing a flow rate of up to 4.1 gallons (15.5 liters) per minute of 55,000 psi (3,000 bar) ultra-high pressure water for waterjet cutting, surface preparation and cleaning applications.
The iP55-280DS utilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility.
A 36,000psi model is also available.
Find out more at www.jetedge.com.
|
|
Maximum pressure : 4140 bar (60,000 psi).
Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
Soundproofed casing.
Complete hydraulic unit, with 10 µ filtration, and water cooling.
Safety valve for automatic bleed-down of the UHP circuit.
PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
Turnkey equipments.
Pumps with the UHP components reaching the best life times of the market.
Decrease of the running costs.
|
|
High Pressure Pump
STREAMLINE Classic SL-V 50
Our STREAMLINE™ SL-V Classic reflects the new market
requirement for a completely self-contained, easy
to hookup unit, guaranteeing you top HSEC intensifier
technology in an affordable package.
Nominal Power Rating: 37 kW (50 PS)
Working Pressure: 500-3.800 bar
Max. Flow Rate: 3.8 l/min
|
|
| ... products without technical information |
| |
Features:
- Low level Indicator light
- Pressure regulator with water removal for incoming air
- Single valve operation to pressurize and discharge pot
- Abrasive rated discharge valving
- Cover and Screen
|
|
|
|
|
|
Abrasive storage hopper
TSA I
Application in all the systems:
The TSA I was conceived to adapt on all new systems LDSA or already in service Its implementation does not require any adaptation and can be installed without overcost on a system already in production.
The TSA can also adapt to the other systems of the market, and for the majority without modification.
A tested technology:
The TSA was conceived by using principles simple and known, it integrates a valve into guillotine planned for an operation in an abrasive and corrosive environment.
One long period of in situ tests enabled us to validate one exceptional lifespan without any maintenance operation.
Safety:
The TSA respects all the security standards in force and is delivered with an integrated scale.
The opening of the big-bag requires cutting tool, therefore no risk that the operator cuts himself.
A strong point: facility of use:
The operation of the machines of cutting by abrasive water jet, requires an increased availability of the operator and an important autonomy for a work without operator.
With the TSA you can directly store a big bag of 1 ton or 2 tons and to have a very great autonomy.
The big bag is in charge with a means of handling (overhead travelling crane or lifting truck), it is then open via a trap door of access envisaged for this purpose. The big bag provided by LDSA does not require a cutting tool to open them on the lower part, a system "sock" is envisaged.
The big bag once opened, it is enough to open the guillotine valve and the system automatically filled SAEB ERAKAT.
|
|
Sharp technologies:
The high-capacity production machines of JUNKER TOOLTEC for mass production of cutting tools work with high precision, economy and reliability.
Economical and exact grinding:
With machines from our business unit JUNKER TOOLTEC demanding customers produce taps, end mills, reamers and counter sinks but also saw blades as well as other special cutting tools.
For each machining type on a cutting tool JUNKER has the ideal technology. Next to HSS tools machines from JUNKER TOOLTEC also gring carbide tools economically and exact.
|
|
The Haro Punchline is made of 2 models I and II depending on the number of mounted wheel spindles. This product range has the same constructive features that made the reputation of the Haro grinders and achieves the same level of precision while combining high reliability, ease of operation and unique robustness.
The machine design brings this line on top of Punch technology by use of the creep-feed method. Pre-selection for roughing and diamond finishing (so-called super finishing) can be defined.
This high precision grinding machine for producing punches from solid is equipped with Sinumerik 840Di NC control.
The Haro Punchline series is unique for:
* the power distributed on the wheel: 20 KW
* the powerful water cooling system: 20 bars
* the unsurpassed rigidity and stability of the machine bed.
|
|
Higher productivity when grinding teeth of circular saw blades.
Generating all technically manufacturable tooth profiles with equal and unequal tooth heights in oscillating high performance longitudinal grinding precise to the micron tooth geometry.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
