|
|
The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation.
Performance Information
- Max. flow: 38 gpm/144 lpm
- Max. pressure: 1200 psi/83 bar
- Max. rated speed: 800 rpm
|
|
P3-80 is a maintenance friendly triplex plunger pump which is manufactured in series. Nearly all components are standardized.
- Power max. 750 kW
- Pressure max. 1,020 bar
- Capacity max. 3,295 l/min at 130 bar
|
|
|
|
|
|
The Jet Edge iP55-150 is a 150-horsepower waterjet intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 3.2 gallons (12.11 liters) per minute to a variety of cutting, surface preparation or cleaning tools.
The Jet Edge iP55-150 water jet intensifier pump features a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. A 150-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high-efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems.
Like all Jet Edge UHP waterjet intensifier pumps, the iP55-150 offers complete flexibility for waterjet cutting, cleaning or coating removal applications.
|
|
|
|
|
|
The Jet Edge iP55-30 is a 30-horsepower water jet intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to .65 gallons (2.5 liters) per minute to a variety of cutting, surface preparation or cleaning tools.
The 4,100 bar (60,000psi) Jet Edge iP55-30 water jet intensifier pump features a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. Its 30-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump.
The high-efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems.
Like all Jet Edge UHP water jet intensifier pumps, the iP55-30 offers complete flexibility for waterjet cutting, cleaning or coating removal applications.
|
|
|
|
|
|
The Jet Edge iP55-75 is a 75-horsepower waterjet intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1.5 gallons (5.7 liters) per minute to a variety of water jet cutting, surface-preparation or cleaning tools.
The Jet Edge 75hp 4,100 bar (60KSI) iP55-75 water jet intensifier pump features a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. A 75-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump.
The high-efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems.
Like all Jet Edge UHP water jet intensifier pumps, the iP55-75 offers complete flexibility for waterjet cutting, cleaning or coating removal applications.
Jet Edge waterjet intensifier pumps are available in a wide range of models: 2,500 bar, 4,100 bar and 6,200 bar, 30-280hp.
|
|
|
|
|
|
The Jet Edge iP55-200 is a 200-horsepower waterjet intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (4,100 bar) with flow rates of 0 to 4.0 gallons (15.2 liters) per minute to a variety of cutting, surface preparation or cleaning tools.
The iP55-200 water jet pump features a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. Its 200-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems.
Like all Jet Edge UHP water jet intensifier pumps, the iP55-200 offers complete flexibility for waterjet cutting, cleaning or coating removal applications.
|
|
|
|
|
|
Capable of producing pressures in excess of 6,200 bar (90,000 psi) the 100hp Jet Edge X-Stream xP90-100 water jet pump achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 4,100 bar (60,000 psi) pumps, enabling users to increase productivity and reduce part costs.
The X-Stream water jet pump produces 50% more pressure than a 4,100 bar water jet intensifier pump, resulting in a 40-50% increase in productivity for many materials. The X-Stream supports a 5,200 bar (75,000 psi) continuous operating pressure. Compared to a 4,100 bar water jet pump, typical operating pressures of 5,200 bar use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. They typically reduce taper by up to 0.001". The X-Stream is capable of producing flow rates of 1.45gpm and supports up to a .017" orifice. Its fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology.
|
|
|
|
|
|
Capable of producing pressures in excess of 90,000psi (6,200 bar), the 50hp Jet Edge X-Stream xP90-50 waterjet intensifier pump achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi waterjet pumps, enabling users to increase productivity and reduce part costs.
The X-Stream water jet pump produces 50% more pressure than a 60,000psi intensifier pump, resulting in a 40-50% increase in productivity for many materials. The X-Stream supports a 75,000psi (5,200 bar) continuous operating pressure. Compared to a 60,000psi water jet pump, typical operating pressures of 75,000psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. They typically reduce taper by up to 0.001". The X-Stream is capable of producing flow rates of 0.7 gpm and supports up to a .011" orifice. Its fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology.
|
|
The Jet Edge iP60-100 waterjet intensifier pump is a 100hp waterjet pump rated for 60,000 psi (4,100 bar). It features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Matched-metal components prevent galling of hydraulic system components.
Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump. Hydraulic fluid also is cooled and filtered. Jet Edge waterjet pumps feature a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings; free-floating self-aligning plungers increase seal life. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of ultra-high pressure water to the cutting tool, ensuring optimal cut quality.
|
|
Standard characteristics :
- Maximum pressure : 4140 bar (60,000 psi).
- Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
- Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
- 1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
- Soundproofed casing.
- Complete hydraulic unit, with 10 µ filtration, and water cooling.
- Safety valve for automatic bleed-down of the UHP circuit.
- PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
- Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
- Turnkey equipments.
- Pumps with the UHP components reaching the best life times of the market.
- Decrease of the running costs.
|
|
Mini linear piston block-compressor not lubricated.
- Nominal capacity: 5 to 50 l/min,
- Maximum Pressure: 0,1 to 2,5 bar.
|
|
The Moog RKP pump, is a radial piston pump that has served the industrial market for over two decades. This product is a proven design with high reliability and a large selection of control options. It is well-respected in the industry for its rapid response times, high volumetric efficiencies, low noise levels, compact size and robust design.
Available in 7 pump sizes between 19 cc and 140 cc per revolution, the RKP pump has maximum speed ranges of 1,800 to 2,900 rpm. High pressure versions and multiple pump arrangements are available.
Also available are other hydraulic products such as servovalves, servo-proportional valves, cartridge valves, directional valves,lintegrated hydraulic manifold systems, electronics and accessories.
Our pumps are known for long service life and when you need maintenance or repairs, ask for Moog Authentic Repair Services.
|
|
Goulds line of axial flow pumps is unmatched in the industry for low head/high capacity pumping requirements.Especially when corrosive or abrasive solutions or slurries are involved. Extended service life, mechanical reliability, custom designs and a wide range of materials allow the Model AF to pump practically any liquid.
Specifications:
Capacities to 200,000 GPM (35,000 m3/h)
Heads to 30 feet (9 m)
Temperatures to 600° F (300° C)
Pressures to 150 PSIG (1034 kPa)
Solids to 9 in. (228 mm)
|
|
- Reliable performance
- No need to fix a sieve on the pump
- Easy installation
- Without jam
- Can be equipped with double-guide way automatic coupling system
- Transporting liquid containing hard solid and fibrous things and liquid that is very dirty
- Convenient maintenance
- Well tear performance
|
|
|
|
|
|
The variable volume and pressure compensated design simplifies circuit design, and reduces heat buildup and noise. Four pump control options permit the designer to choose the most efficient means to power his hydraulic equipment. Choices include the standard pressure compensator control, remote pressure control, load sensing control, and horsepower limiting control.
Brass piston slippers pivot and rotate to equalize wear while a fluid passage through the slipper reduces loading and provides lubrication for the piston shoe and wear plate. Hardened swash plate and trunnion pins provide rugged support for the piston block and associated rotating group components.
Efficiently designed porting reduces noise at all pressure and flow levels for quiet, efficient operation that eliminates the need for noise shrouds. The rugged, cast iron body is thicker at stress points which contributes to quiet operation.
Specifications
Mountings: SAE 2 bolt mountings. SAE 'A', SAE' B', and SAE 'C'
Tandem pump drive capabilities
Capacities: 6, 10, 15, 20 29 GPM @ 1750 RPM
Displacements: .88, 1.26, 2.09, 2.62, and 3.78 cubic inches per revolution
Pressure Compensation Ranges: 200 to 3500 PSI continuous duty, up to 4000 PSI intermittent duty
Recommended Fluids:
Petroleum based fluids are recommended. Fluids should be designated by the fluid manufacturer for use in hydraulic systems. Fluids should contain inhibitors to prevent rust and oxidation and should contain anti-wear, anti-foam, and deaerating agents. For other fluid types, please contact your Continental Hydraulics representative.
Recommended Operating Viscosity
Petroleum based fluids:
Optimum - 140 sus (30 Cst.)
Continuous Minimum - 60 sus (10 Cst.)
Continuous Maximum - 750 sus (160 Cst.)
Max cold start up 7500 SUS
Fluid Cleanliness - ISO 18-16-13 is recommended
Operating Temperature - Operating temperature is determined by the viscosity characteristics of the fluid used. Control operating temperature as needed to assure that fluid viscosity is within acceptable limits. Because high temperatures degrade seals, reduce the service life of the fluid, and create scalding hazards, fluid temperatures should not exceed 180° F. (82° C.) at the case drain.
Mounting Position - Unrestricted. However, horizontal mounting is preferred.
Relief valves are recommended for all applications to help protect personnel and the system from potentially damaging overloads
|
|
Together with our standard stainless steel materials matching, we can offer special stainless steels, titanium or bronze.
Temperature ranges up to 350 degrees C. e.g. pumps for thermo oils.
High capacity - external gear pump
Gear dosing pump Stainless steel gear dosing pump in special design
HP radial piston pump (closed design)
High capacity internal gear pumps with integral pressure limiting valve for low noise operation
|
|
The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation.
Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.
|
|
Positive constant displacement, rotary, three screw pump. Flow rate per revolution 9.8 - 307 cm3 in 14 steps.
The three screws, the central driven screw – the power rotor – which meshes with the two sealing screws – the idler rotors –are the only rotating components ot the pump. The axial pressure and friction loads on the pump rotors are hydraulically balanced. The power rotor is positioned axially by the selfcompensated thrust washer arrangement, being part of the hydraulic balancing system of the power rotor. The pump accommodates mechanical shaft seals complying with the DIN 24960 Standard.
|
|
|
High overall efficiency at very low speed. Low noise. High speed range. Above-average lifetime. Optimal price / performance ratio. Continuous self lubrication and cooling through the inflow.
|
|
Micropump's valveless piston pumps offer a high level of accuracy and reproducibility when pumping both high or low viscosity fluids or thick and abrasive media. Pump designs feature a no-check valve construction that virtually eliminates clogging and maintenance concerns in a compact package size offering cost effective solutions from many applications
Performance Summary
- 0.94 ml/rev displacement
- 6.89 bar max. rated differential pressure
- Viscosity tested to 5000 cps
|
|
|
Kinney KC & KTC Series Multi-stage rotary piston vacuum pumps provide pumping speeds of 5-112 CFM (8-190 m³/h) with ultimate pressures of 0.2 milliTorr (0.027 Pa). Our KTC series vacuum pumps include our exclusive triplex piston design to eliminate vibration.
|
|
The outstanding performance and flexibility of Gast oilless Rocking Piston air compressors and vacuum pumps, available in standard, twin and miniature styles, make them the ideal choice for countless applications.
· Bonded piston rod and bearing assembly will not slip, loosen or misalign, providing years of trouble-free performance
· Exclusive long-life cup material ensures extensive service-free operation
· All wetted aluminum parts are treated for corrosion protection, offering greater durability in demanding applications
· Rigid motor shell and superior motor-to-pump alignment gives tighter tolerances and allows more consistent performance and noise levels
|
|
|
Rotary piston pumps for corrosive media and very accurate dispensing, various pump heads are available, flow rates up to 2,3 liter/min
|
|
|
The CSF Inox Spa pneumatic piston pumps are available in different executions, according to the construction characteristics, materials and different uses for which they are intended. They meet the most various handling requirements of products with extremely high viscosity. Designed for pouring, feeding, spraying, transporting, for circulation systems and where an adjustable capacity is required. Since they are fed by compressed air, they are also suitable for explosion-proof environments.
|
|
|
|
|
|
* Brands:
Worthington,IDP,Aldrich
* Applications:
Booster,Fertilizer,Water Injection,Slurries,Pipeline,Metal and Steel Industry,Light Slurries
* Industries:
Crude Pipeline,Dewatering & Water Supply,Heavy Oil and Upgrading,Crude Handling and Treatment
* Standards:
* Misc:
Plungers are fastened to yokes by means of a patented spherically seated self-aligning connection. This connection permits the plungers to run free through the packing and align themselves with the stuffing box.
Individual Stuffing Box Assemblies are designed to accommodate a variety of packing styles as well as lubrication and flushing methods. The design provides easy accessibility for disassembly and assembly, resulting in reduced maintenance costs and downtime.
Sectionalized Fluid End Components (discharge manifold, suction manifold and working barrel) facilitate inspection, alignment or replacement without excessive pump disassembly.
Crankshaft Main Bearings, four to eight depending on model, can be rolled off without removing the crankshaft.
API 674 Lube Oil System is available as an option.
Features:
* Operating parameters
o Flows to 1140 m3/h (5000 gpm)
o Pressures to 1035 bar (15 000 psi)
o Temperatures to 400°C (750°F)
o Power rating to 3280 kW (4400 hp)
|
|
Flowserve's VTE, VQE, VSE and 9V Series of reciprocating pumps are vertical multiplunger types. Designed with flexibility in mind, they are available in multiple fluid-end designs and materials making them compatible with a wide variety of industrial applications.
* Flows to 1140 m3/h (5000 gpm)
* Pressures to 1035 bar (15 000 psi)
* Temperatures to 400°C (750°F)
* Power rating to 3280 kW (4400 hp)
|
|
A selection of piston pumps maximizes delivery of cold adhesives, including PVA, solvent-based, starch and dextrin adhesives for packaging, converting and product assembly applications.
LA 300 Piston Pumps
Accommodate 20- (5-gal), 30-, and 200-liter (55-gal) containers using 7:1 air-to-fluid ratio for precise adhesive application.
Meet specific installation requirements by offering wall-mount, lid-mount and system-trolley configurations and independent orientation of filter and motor sections.
Maintain consistent adhesive output with balanced air motor up to 120 liters per hour (31.7 gal/hour).
Use standard and wear-resistant rods to handle wide range or adhesives and production needs.
Resist corrosion with engineered plastics and stainless steel parts.
|
|
The Hypro Series 5200 Big Twin® piston pump is suitable for applications in high pressure washers for industrial and agricultural cleaning needs. It is also useful as a sprayer pump to apply a wide range of chemicals.
The Series 5200 is constructed of cast iron body and cylinder heads, unitized stainless steel valve assemblies and double row ball bearing supported crankshaft.
|
|
|
|
|
|
Features and benefits of an AOM airless diaphragm pump:
easy to use even with high viscosity coatings with a minimum quantity of thinner
allows to spray every kind of material thanks to the possibility to set the pressure at any level from 0 to 220 bar
less OVERSPRAY assures
the aluminium Anticorrodal pump head chemically nickeled and the suction and compression valves made in stainless steel, prevent rust and corrosion and extend service life of the parts even when using dispersions and water-soluble paint.
Less maintenance thanks to the high quality tungsten carbide seats, stoppers and suction and compression valves' spheres
Easy to dismantle for maintenance: the spare parts that are more subject to wear are interchangeable among the different models.
overpowered electric motors in conformity with CEI laws extend service life
tough carts and wheels make the pump easy to move
CE marking guarantees manufacturing process in conformity with the severe European Safety Laws and prevents misuse of the unit.
|
|
Plunger pumps with low Life Cycle Costs for dosing and injecting chemicals.
Simple and sturdy plunger pump design for the accurate, high-pressure dosing and injecting of chemicals.
Key Benefits
Simple and rugged design
Dosing accuracy +/- 0.5%
Withstands pressures up to 350 bars
|
|
|
|