|
|
THE LPRP PUMPS
This is the ideal pump for low flow rates and low discharge pressure.
Available flow rates: 2to 50 L/min
Pressure up to 150 bar at slow speed
Available for all cryogenic gases including LNG
Low operation cost
0 m of NPSH
Large scale of feature with numerous options
|
|
Pulseless series is designed to be almost nothing of any pulsation with high accuracy by special cam and check valves.
Compact design achieved by the cylindrical cam which drives two plungers.
|
|
Maximum pressure : 4140 bar (60,000 psi).
Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
Soundproofed casing.
Complete hydraulic unit, with 10 µ filtration, and water cooling.
Safety valve for automatic bleed-down of the UHP circuit.
PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
Turnkey equipments.
Pumps with the UHP components reaching the best life times of the market.
Decrease of the running costs.
|
|
|
|
|
|
General descriptino
HINDHIVAC manufactures different models of Rotary Piston Vacuum Pumps. These Rotary Piston Vacuum Pumps are robust and are most reliable. They can be used in combination with Roots Vacuum Blowers.
These Piston Pumps are extremely useful in handling high volumes of gases and are provided with Gas Ballast Valves to pump out condensable vapors. These piston pumps are built to give uninterrupted service even under strenuous working conditions with economical power and oil consumption.
These Piston Pumps are water cooled to ensure continuous duty with high efficiency. The Piston Pump has a unique design in which the pump ensures that while the piston continues to rotate it maintains isolation of the compression and the suction cycle, drawing out the compressed air through the exhaust valve. The pump has a low oil charge and the gas ballast is provided to avoid oil contamination due to condensable vapors. This Piston Pump is water cooled to avoid over heating and for continuous running
|
|
|
|
|
|
Salient Features :
* Low pump speed for high service life.
* Appropriate valve kinematics gives minimum fluctuation.
* Split type power frame for easy maintenance.
* Low speed force lubrication to power end.
* Force speed lubrication to Plungers.
* Crank Shaft may extend from either side of power frame.
* Replaceable stuffing box with stffing box nut for easy maintenance.
* Plungers available in options
(Hardened stainless steel /Stellilite/ Colomony )
Application
* Crude Oil Dispatch
* Water / Effluent Injection
* Atomization / Spray Drying
* Oil / Chemical Handling
* Hydraulic Testing
* Reverse Osmoses
* Well Servicing / Acidicing
Technical Specifications :
Pump Type - Horizontal ,Triplex Reciprocating Plunger Pump
Max Working Pressure - 25000 PSI
Max Discharge - 1130 LPM
Max Power - 300 HP
Duty - Continuous
Stroke Length - 160 mm
Power Drive - Electric Motor / Diesel Engine / Gas Engine / Truck Engine
Mounting - Base plate / Skid / Trolley / Trailer
Power End Connection - Directly coupled with Foot/Shaft mounted gear box
Dry Weight of Pump - 2000 Kgs (Bare Shaft )
|
|
Salient Features :
• Simplex Reciprocating Type pump
• High Durability and life.
• Models available up to 2000 Bar
• Simple in design and maintenance.
• Appropriate valve kinematics gives minimum fluctuation.
• Plungers available in options (Hardened stainless steel / Colomony)
Application
* Hydraulic Testing (Valves, Tubes, Pipes & Vessels)
Technical Specifications :
Pump Type - Horizontal , Triplex Reciprocating Plunger Pump
Max Working Pressure - 30,000 PSI
Max Discharge - 12 LPM
Max Power - 10 HP
Duty - Intermittent
Stroke Length - 32 mm
Power Drive - Electric Motor / Diesel Engine
Mounting - Base plate / Skid / Trolley
Power End Connection - Pulley Driven / Gear Reduction
Dry Weight of Pump - 25 Kgs (Bare Shaft )
|
|
|
|
|
|
Salient Features :
* Low pump speed for higgh service life
* Compact design with inbuilt speed reducer
* Single piece SS 304/316 fluid end
* Appropriate valve kinematics gives minimum flucation
* Top open crank case for easy maintenance assembly & good access
Application
* Hydrojet cleaning
* Hydro testing
* Dechoking of Heat Exchanger & Condenser tubes
* Hot Metal Descaling
* Reactor / Vessel cleaning
* Oil / Chemical transfer
* Sewerage Cleaning
* Water / Effluent Injection
Technical Specifications :
Pump Type - Horizontal ,Single Acting, Triplex Reciprocating Plunger Pump
Pump Speed - 365 RPM ( with prime mover of 1500 rpm )
Max Working Pressure - 1500 Kg/Cm2
Max Discharge - 204 LPM
Max Power - 100 HP
Duty - Continuos / Intermittent
Stroke Length - 95 mm
Power Drive - Electric Motor / Diesel Engine / Gas Engine
Mounting - Base plate / Skid / Trolley / Trailer
Power End Connection - Direct coupled with inbuilt speed reduction gears
Dry Weight of Pump - 350 Kgs (Bare Shaft Pump)
Standard Accessories - Pessure regulating Valve, Safety Relif Valve, Suction /Strainer, glycerine Filled Pressure Gauge
|
|
Salient Features :
* Low pump speed for high service life.
* Rugged design for continuous duty application .
* Top open power frame for easy maintenance.
* Speed reduction by external gear box.
* Replaceable stuffing box with staffing box nut for easy maintenance.
* Forged SS fluid end.
Application
* Crude oil dispatch
* Water effluent Injection
* Descaling of steel
* Hydraulic pipe testing
* Hydrojetting
* Multiple jet cleaning system
Technical Specifications :
Pump Type - Horizontal , Triplex Reciprocating Plunger Pump
Max Working Pressure - 20000 PSI
Max Discharge - 597 LPM
Max Power - 150 HP
Duty - Continuous
Stroke Length - 120 mm
Power Drive - Electric Motor Engine / Diesel Engine / Gas Engine
Mounting - Base plate / Skid / Trolley
Power End Connection - Gearbox Reduction
Dry Weight of Pump - 1000 Kgs (Bare Shaft)
|
|
Salient Features :
* Compact unit for easy movement.
* Single piece SS fluid end.
* Appropriate valve kinematics gives minimum fluctuation
* Designed for easy operation & maintenance.
Application
* Hydraulic Testing of valves / Tubes / vessels
* Hydrojet cleaning washing
* Chemical Transfer
* Spraying
Technical Specifications :
Pump Type - Horizontal ,Single Acting, Triplex Reciprocating Plunger Pump
Pump Speed - 600 RPM ( with prime mover of 1500 rpm )
Stroke Length - 28 mm for T-500 (04)
Power Drive - Electric Motor / Diesel Engine
Mounting - Base plate / Trolley
Power End Connection - Pulley Driven / Gear Box
Dry Weight of Pump - 60 Kgs (Bare Shaft Pump)
Standard Accessories - Pessure regulating Valve, Safety Relif Valve, Suction / Strainer, glycerine Filled Pressure Gauge
|
|
Flow rate is based on 100% volumetric efficiency and 20°C ambient temperature
min. inlet pressure depending on fluid medium
min. rpm depending on rod loading
Gear with splash lubrication
V-Belt drive
Also available to API 674
Special medium such as sea water, glycol, methanol,oils, etc. on request
|
|
Flow rate is based on 100% volumetric efficiency and 20°C ambient temperature
min. inlet pressure depending on fluid medium
min. rpm depending on rod loading
Gear with force-fed and oil cooler
Standard gear ratios:i = 3,39 - 4,05 - 4,76 - 5,25
Also available to API 674
Special medium such as sea water, glycol, methanol, oils, etc. on request
|
|
•Gear with splash lubrication
•Cycle-stress-free pumphead in stainless steel
•Tungsten carbide plunger and valve parts in stainless steel
•Assembly horizontal
|
|
Flow rate is based on 100% volumetric efficiency and 20°C ambient temperature
min. inlet pressure depending on fluid medium
min. rpm depending on rod loading
Gear with splash lubrication
Standard gear ratios:i = 3,33 - 3,50 - 4,04 - 4,62 - 5,44
Also available to API 674
Special medium such as sea water, glycol, methanol, oils, etc. on request
|
|
Standard characteristics :
- Maximum pressure : 4140 bar (60,000 psi).
- Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
- Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
- 1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
- Soundproofed casing.
- Complete hydraulic unit, with 10 µ filtration, and water cooling.
- Safety valve for automatic bleed-down of the UHP circuit.
- PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
- Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
- Turnkey equipments.
- Pumps with the UHP components reaching the best life times of the market.
- Decrease of the running costs.
|
|
Standard characteristics :
- Maximum pressure : 4140 bar (60,000 psi).
- Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
- Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
- 1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
- Soundproofed casing.
- Complete hydraulic unit, with 10 µ filtration, and water cooling.
- Safety valve for automatic bleed-down of the UHP circuit.
- PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
- Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
- Turnkey equipments.
- Pumps with the UHP components reaching the best life times of the market.
- Decrease of the running costs.
|
|
Xaloy Melt Pumps: Extrusion Line Synchronization Made Easy
You can eliminate extruder surge and screw beat at the die by installing an Xaloy melt pump between your extruder and die. Our melt pumps are extremely efficient at building pressure and metering polymer to the die at a highly consistent rate and pressure.
Xaloy melt pumps come in a variety of types and sizes to fit the needs of your extrusion, compounding or polymer production process.
Standard extrusion pumps: Discharge pressure up to 5000 psi (345 bar).
High-pressure extrusion pumps: Discharge pressure up to 10,000 psi (690 bar).
High-precision extrusion pumps: Virtually pulse-free performance for the most demanding specialty film and profile extrusion processes.
Polymer compounding pumps: Engineered for maximum quality in pelletizing lines.
|
|
|
|
|
|
Universal application
ATEX-certification
Certificates for all European countries
Patented pre-chamber
Small. Strong. Durable
Since 1994 we have been producing a specially developed pump for vapour recovery. A small, robust unit. which is suitable for both new installations and retrofitting. It works precisely and reliably at temperatures between -40° C and +60° C.
Permits and advantages
ATEX certification in compliance with Directive 94/9/EC, which is binding within Europe as of June 30th 2003, is already standard.
Also standard is certification for all European countries, which have statutory regulations governing vapour recovery stage II.
The patented pre-chamber increases the durability of the pump against condensate and liquids. A clever drainage system protects the crankcase from the condensate created and also means the pump can be fitted in a range of positions.
Reliable and safe operation is absolutely vital. Tried and tested more than 150.000 times with a very high service life.
You can choose the type of drive: either direct or belt drive.
Flame arresters, which have been specially developed for our product, have been fitted to the intake and outlet side of these compact and lightweight pumps.
The MEX 0831-11 can be used both with mechanical and electrical proportional valves - speed regulation is available upon request. The UL licence is in progress.
|
|
POLYMAR.
Gear Pumps and Drive Units
The Advanced Polymer Extrusion Technology
Merkmale
Increase of discharge capacity
Reduction of total energy consumption
Increased product quality
Constant metering volume
System solutions with filter and drive
Integrated pressure- and speed-control
Integrated heating system
Reduction of total investment
Polymer polyamide, polyester, polypropylene, polyacrylate, polyethylene, polyurethane, cellulose and other elastomers
Viscosity up to 10,000 Pa.s
Operating temperature up to 350°C (700°F)
Discharge pressure up to 300 bar (4,500 psi)
Design inline or face mounted
Material
N23 - highly chrome alloyed cast steel with added nickel and molybdenum
F24 - molybdenum, tungsten, vanadium and chrome alloyed high-speed steel
Special material on request
Drive type extended drive shaft
Drive according to customer’s specification
|
|
DVSR Nuclear ASME Section III Class 3, Impeller Between Bearings, Radially Split, Volute Casing, Single Stage Pump
Pump Design incorporates a volute casing and double suction impeller.
Features:
* Centerline mounted
* Operating parameters
o Flows to 5065 m3/h (22 300 gpm)
o Heads to 802 m (2630 ft)
o Pressures to 87 bar (1265 psi)
o Temperatures to 206°C (402°F)
o Power to 11 185 kW (15 000 hp)
o Speeds to 6000 rpm
|
|
The Flowserve DVSR pump was designed specifically for nuclear reactor and steam generator feed service. This single stage, high speed pump model features a volute casing and double suction impellers.
* Flows to 5065 m3/h (22 300 gpm)
* Heads to 802 m (2630 ft)
* Pressures to 87 bar (1265 psi)
* Temperatures to 206°C (402°F)
* Power to 11 185 kW (15 000 hp)
* Speeds to 6000 rpm
|
|
|
Our custom engineered skid-mounted PUMPING SYSTEMS provide a system tailored to your application and eliminates the designing, sourcing, fabrication and testing from your schedule. These custom skid-mounted PUMPING SYSTEMS can be designed for high pressure wash down, jetting, chemical injection, wet blasting, in-plant cleaning, reverse osmosis, liquid transfer or a multitude of other liquid handling requirements. Each custom PUMPING SYSTEM is built to your specifications and features a rugged reinforced base of steel with a 2-mil epoxy finish or 304SS with drive options including electric, gas, diesel, hydraulic, gear motor or VFD control. All PUMPING SYSTEMS are flow and pressure tested and available with short lead times. Choose a portable single pump, a large capacity 240 GPM pumping system or multiple PUMPING SYSTEMS to meet fluctuating demands.
|
|
Pump Medium
Municipal raw sludge, also to feed filter presses. Black water and bilge water.
Fine structure pastes with up to 15% dry solids.
Ball valves
Single piston Type STPPb
Double piston Type DTPPb
Capacities up to 120m³/h
Forwarding pressure up to 100bar
|
|
SolidPumps Piston Pumps are suitable for transporting highly viscous media with solid particle contamination such as steel sheets, glass, slaughterhouse waste with bones, ropes, wire, wood, gravel, etc..
Piston pumps have low maintenance costs and all parts exposed to the medium, such as the cylinder liner, piston, piston tube, slide gate valve, seals, etc. are easily replaceable.
|
|
Pump Medium
Hazardous waste paste with up to 35 % dry solids. Contaminated solvents.
Contaminated oil sludge. Paste with large size lumps
Slide gate valves
Single piston Type STPPs
Double piston Type DTPPs
Capacities up to 100m³/h
Forwarding pressure up to 100bar
|
|
Pump Medium
All sorts of filter cake, after filter, presses, or centrifuges. Flotation sludge
Fine structure paste. Coal tailings.
Poppet valves
Single piston Type STPPp
Double piston Type DTPPp
Capacities up to 100m³/h
Forwarding pressure up to 160bar
|
|
THE DELTA N PUMPS
Thanks to its numerous advantages such as reliability and low maintenance costs, this product has become the most standard pump for automatic filling stations.
Available flow rates: 1 to 500 L/min (triplex version)
Pressure up to 1'000 bar
High safety level, especially designed for use with oxygen
Available for all cryogenic gases including LNG
Very efficient: can be fitted with the Cryomec patented supercharger for 0-NPSH
Low speed version can be used in continuous duty
Easy maintenance
Large scale of feature with numerous options
|
|
Salient Features :
* Low pump speed for high service life.
* Rugged design for continuous duty application.
* Top open power frame for easy maintenance
* Speed reduction bt external gear box.
* Fluid end designed for in place replacement of piston rings.
Application
* Water / Effluent Injection
* Bowser loading
* Hydraulic Pipe Testing
* Crude Oil Dispatch
Technical Specifications :
Pump Type - Horizontal ,Triplex Reciprocating Plunger Pump
Max Working Pressure - 2736 PSI
Max Discharge - 60 M / Hr
Max Power - 200 HP
Duty - Continuous
Stroke Length - 120 mm
Power Drive - Electric Motor / Diesel Engine / Gas Engine
Mounting - Base plate / Skid / Trolley
Power End Connection - Gearbox Reduction
Dry Weight of Pump - 600 Kgs (Bare Shaft )
|
|
Salient Features :
* Low pump speed for high service life.
* Rugged design for continuous duty application.
* Top open power frame for easy maintenance
* Speed reduction bt external gear box.
* Fluid end designed for in place replacement of piston rings.
Application
* Water / Effluent Injection
* Bowser loading
* Hydraulic Pipe Testing
* Crude Oil Dispatch
Technical Specifications :
Pump Type - Horizontal ,Triplex Reciprocating Plunger Pump
Max Working Pressure - 6030 PSI
Max Discharge - 440 LPM
Max Power - 100 HP
Duty - Intermittent / Continuous
Stroke Length - 95 mm
Power Drive - Electric Motor / Diesel Engine / Gas Engine
Mounting - Base plate / Skid / Trolley
Power End Connection - Pulley Driven / Gearbox Reduction
Dry Weight of Pump - 450 Kgs (Bare Shaft )
|
|
| ... products without technical information |
| |
|
|
