|
|
The Resato Powerjet PJE waterjet cutting pump is an example of our continuing commitment to research and development.
The latest generation of our skillfully designed waterjet cutting pumps offers monitor control and simple time-saving servicing possibilities. Proven reliability reduces down-time to a minimum and the operation costs will be reduced accordingly. As a result of further developments and tests in our cutting laboratory, the life cycle of high pressure seals and other parts subject to wear has been extended considerably.
To complement our extensive range of waterjet cutting pumps we offer all waterjet cutting accessories vital to the realization of a turn-key cutting system.
|
|
|
AccuStream intensifier waterjet machines give you a choice of 30-, 50-, 75- 100- or 150-horsepower units with adjustable pressures up to 60,000 psi. All AccuStream waterjet machines feature the AccuStream-built AIT Technology for maximum cut pressures and peak performance under the most demanding applications.
|
|
|
|
|
|
The direct drive pump operates in the same manner as a low-pressure "pressure washer" that you may have used to pressure wash a house or deck prior to repainting. It is a triplex pump that gets the movement of the three plungers directly from the electric motor. These pumps are gaining acceptance in the waterjet industry due to their simplicity. At the time of this writing, direct drive pumps can deliver a maximum continuous operating pressure 10 to 25% lower than intensifier pumps units (20k to 50k for direct drive, 40k to 60k for intensifiers).
Only Flow manufactures both HyPlexTM and intensifier pumps. As a result, we can offer you the pump solution that is best suited for your application. Whether you run 24 hour, 7 days a week production or prototype jobs only a few hours a day, we have the right pump for you. Best of all, no matter which style of pump you choose, you'll receive a Flow pump that is reliable, simple, efficient, and easy to maintain. The focus of all our designs is performance, reliability and longevity so that your productivity is increased.
Flow Pumps Operate At Higher Pressures
Flow intensifier pumps are rated at 60,000 psi and our systems actually run at that pressure. No backing off, no hedging. It's another big reason why Flow equipment out-produces all others. Flow manufacturers the most complete range of ultrahigh-pressure waterjet pumps in the industry. From 205 hp, 6.5 gpm diesel powered Husky pumps for surface preparation to 100,000 psi pumps used for ultrahigh-pressure food processing to intensifier and direct drive pumps for waterjet cutting, Flow has a pump to meet your needs. Flow is the only waterjet company to offer its customers a choice of intensifier or HyPlex(direct drive) waterjet cutting pump technology. The wide range of waterjet pumps Flow builds is your assurance that you and your application will be paired with a pump that is specifically tailored to meet your needs.
Our waterjet cutting pumps set the industry standard for performance and reliability that is proven in 24 hour, 365 day a year operations around the world. All Flow pumps are capable of smooth, continuous operation, year after year, at the pressure they are rated. This ensures you receive the maximum possible benefit of pump's capacity and the performance you have paid for. It's an important distinction to make, because a pump's performance is limited by the lowest pressure it reaches in a cycle. By operating smoothly with a minimum of pressure fluctuations at the highest rated pressure a Flow pump can outperform other pumps which are rated for high pressures, but don't necessarily operate there smoothly or continually.
|
|
The Jet Edge iP55-75 is a 75-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1.5 gallons (5.7 liters) per minute to a variety of cutting, surface-preparation or cleaning tools.
Features
- High efficiency TEFC motor
- 1,500 or 1,800 nominal motor speed (rpm)
- Electronically shifted intensifiers
- Wye-Delta soft start with disconnect
- 0.5 gallon (1.9 liter) high pressure attenuator with 1.45 micron filtration
- Safety shutdown systems
- Automatic safety pressure bleed-down valve
- Thermostatically controlled cooling system
- Programmable Logic Controller (PLC) for operation and safety monitoring
- Axial piston, variable displacement, pressure-compensated hydraulic pump
- Liquid-filled pressure gauges
- UHP safety shielded tubing
|
|
|
|
|
|
AccuStream intensifier waterjet machines give you a choice of 30-, 50-, 75-, 100- or 150-horsepower units with adjustable pressures up to 60,000 psi. All AccuStream waterjet machines feature the AccuStream-built AIT Technology for maximum cut pressures and peak performance under the most demanding applications.
No other waterjet cutting machine incorporates the features of the AIT intensifier to deliver the simplest, easiest-to-operate, most reliable system. AccuStream's intensifier technology combines innovative design features, quality manufacturing, and carefully selected materials to maximize maintenance intervals, simplify component replacement and minimize cost of operation.
Key Features
Whatever your requirements, there's an Accustream intensifier waterjet cutting machine to meet your needs. Accustream's menu of options and accessories allows you to fully tailor your waterjet cutting machine to your specific needs. Before you start looking at options, you'll be impressed with the long list of standard features and capabilities packed into every Accustream AS intensifier waterjet pump. These features and capabilities are normally found only on waterjet pumps costing thousands more - and some are not available anywhere else!
|
|
|
|
|
|
The Dual Pump Package operates on the 3rd generation cutting model of OMAX Intelli-MAX® Software, which accommodates cutting at 80 hp utilizing two P4055V pumps.
The P4055V direct drive plunger pump operates at full power with a very low noise level and is driven by a variable speed electric motor for variable output pressure. Based on a single design platform, the pump delivers more than 90% of the electrical input power to the cutting nozzle and provides more cutting power per kilowatt than pumps using intensifier technology. Unlike intensifier pumps, the P4055V uses variable frequency drive (VFD) technology, which prevents the in-rush of currents upon starting the pump.
OMAX designed the Dual Pump Package for shops that specialize in cutting thick, difficult to machine materials and have high capacity production or multiple nozzle requirements. In addition to offering the highest cutting power on the market, the Dual Pump Package is a proven and reliable technology that operates both pumps at optimum efficiency and has an extended seal life in excess of 500 hours. Additionally, the system provides highly efficient, redundant pump operation and permits users to switch between standard and high power operation to ensure the best operation for each application.
|
|
High Pressure Pump
STREAMLINE Classic SL-V 50
Our STREAMLINE™ SL-V Classic reflects the new market
requirement for a completely self-contained, easy
to hookup unit, guaranteeing you top HSEC intensifier
technology in an affordable package.
Nominal Power Rating: 37 kW (50 PS)
Working Pressure: 500-3.800 bar
Max. Flow Rate: 3.8 l/min
|
|
Ideal for use in remote and/or mobile locations where electricity is scarce, the iP55-280DS is powered by a 280hp Cummins turbo diesel engine that meets Tier 3 emissions standards. It is capable of producing a flow rate of up to 4.1 gallons (15.5 liters) per minute of 55,000 psi (3,000 bar) ultra-high pressure water for waterjet cutting, surface preparation and cleaning applications.
The iP55-280DS utilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility.
A 36,000psi model is also available.
Find out more at www.jetedge.com.
|
|
|
|
|
|
Maximum Productivity, Lower Cost of Operation
Maximum productivity and low operational costs are the keys to keeping your business competitive. Flow's 55,000 psi HUSKY pump sets a new industry standard for both productivity and reliability, giving you a portable ultrahigh-pressure waterjet pump that contributes to your bottom line by allowing you to work more efficiently and take on more jobs. The HUSKY is the world's first 55,000 psi direct drive triplex pump with full pressure compensation giving you the power you need to reduce your operating costs and increase productivity on a square foot basis. Now you get Flow's proven HUSKY UHP pump with a world class Caterpillar C-9 engine that meets Tier II emission requirements, on board diagnostics and lower fuel consumption.
The 55,000 psi HUSKY is compatible with all other Flow machines, meaning no additional investment in technology is necessary to upgrade.
Benefits
Maximum productivity from 55,000 psi - the highest pressure available in the industry
Lower cost of operation gives contractors a competitive advantage when bidding on jobs
Compatible with all existing Flow industrial cleaning products
Latest technology makes 55,000 psi pump the easiest-to-use, most reliable pump in the industry
Standard Features
290 hp Caterpillar C-9 Engine, producing 210 nhp - the highest available nozzle horsepower
Automated settings for multiple tool operation
Diagnostic sensors to assist with troubleshooting and preventative maintenance
Engine meets worldwide Tier 2 emission standards
On-board water booster and filtration system
Full pressure compensation allows for multiple tool use
Triple high-pressure outlet ports
82 gallon fuel tank
Multilingual remote operator box
Small 58.5" x 102" footprint
Specifications
Operating Pressure: 55,000 psi (3,790 bar)
Maximum Flow Rate: 6.5 gpm (24.5 lpm)
Approximate Weight: 5575 lbs (2534 kg) dry
Fuel Capacity: 82 gal (310 l)
Engine: 290 hp (216 kW) Caterpillar C-9
Nozzle Horsepower: 210 nhp (157 kW) continuous duty
Speed: 2,100 rpm continuous duty
Water Filtration: 10 micron absolute
Mounting Type: Skid or optional trailer mount
|
|
|
WOMA designs, produces and sells high-pressure plunger pumps driven by electric motors or combustion engines. The can be run in stationary mode but are also suitable for mobile use. The pumps have power ratings up to 780 kW, operating pressures up to 3000 bar, and volumetric flow rates up to 1679 l/min.
|
|
Maximum pressure : 4140 bar (60,000 psi).
Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
Soundproofed casing.
Complete hydraulic unit, with 10 µ filtration, and water cooling.
Safety valve for automatic bleed-down of the UHP circuit.
PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
Turnkey equipments.
Pumps with the UHP components reaching the best life times of the market.
Decrease of the running costs.
|
|
Standard characteristics :
- Maximum pressure : 4140 bar (60,000 psi).
- Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
- Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
- 1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
- Soundproofed casing.
- Complete hydraulic unit, with 10 µ filtration, and water cooling.
- Safety valve for automatic bleed-down of the UHP circuit.
- PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
- Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
- Turnkey equipments.
- Pumps with the UHP components reaching the best life times of the market.
- Decrease of the running costs.
|
|
Standard characteristics :
- Maximum pressure : 4140 bar (60,000 psi).
- Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
- Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
- 1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
- Soundproofed casing.
- Complete hydraulic unit, with 10 µ filtration, and water cooling.
- Safety valve for automatic bleed-down of the UHP circuit.
- PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
- Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
- Turnkey equipments.
- Pumps with the UHP components reaching the best life times of the market.
- Decrease of the running costs.
|
|
| ... products without technical information |
| |
|
|
|
|
Water intended for human consumption without imparting any toxic effect is drinking water. Water of sufficient quality to serve as drinking water is termed as potable water whether it is used as such or not. The non-metallic materials can cause changes in water quality when it comes in contact with it.
BS 6920 and its modified version AS/NZS 4020:2002 (for Australian and New Zealand requirements) is the method for testing the water quality –i.e, ‘Testing of products for use in contact with drinking water’ and any non-metallic product should comply with these test requirements for getting the approval given by Water Quality Centre (WQC).
Zenith PWS has been developed for using in contact with drinking water which has been met all the technical and biological property requirements as tested by following the corresponding Standards.
Zenith PWS is a high performance and low specific gravity (1.13) EPDM rubber compound which can be applied for water fitting (supplying) parts e.g., lining, joining, gaskets, membranes, cisterns, O-rings, washers that are used in contact with drinking water.
For more details please visit our website www.zenithrubber.com
|
|
| ... products without technical information |
| |
|
|
|
|
Small and Medium cases
Small and Medium cases are made of ultra high impact copolymer polypropylene, the same as the rest of the legendary PeliÔ Cases. And like all PeliÔ cases, they offer strength and performance against extreme conditions, rough handling, dust and water. Peli’s patented o-ring sealing system makes the cases watertight, corrosion proof and dust proof. An automatic pressure relief valve ensures that the air pressure inside the case will automatically equalise if the case is taken to high altitudes. PeliÔ’s “double step latches” make opening your case easy, while still providing strong enough force to keep the case closed when dropped or abused. They have metal reinforced padlock protectors to ensure that your case cannot be easily cut or pried open.
1510 LOC (Laptop Overnight Case)
If you’re tired of wasting your time at airport luggage’s carrousels, you will be happy to know that with the 1510 LOC you can avoid the torturous journey undertaken by luggage between the checkpoints and the luggage carousel. The dimensions of the case itself are based upon the maximum overhead bin size allowed by airlines and offers nearly 30 litres of usable storage space.
The 1510 LOC lid features a detachable neoprene sleeve that accommodates the vast majority of laptop computers up to 15.4 inches and gives travellers immediate access at Transportation Security Administration (TSA) checkpoints. The main compartment has a cloth-lined garment storage unit that can fit up to two day’s worth of clothing.
All Peli™ products are covered under Peli’s Unconditional Guarantee of Excellence: “You break it, we replace it…forever™”.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
