|
|
ALTERATION PLAIN OUTPUT SHAFT OR WITH KEY
Only applicable for alterations (lengths and/or diameters) smaller than standard shaft. See table below.
Contact us for dimensions superior to standard shaft.
|
|
In applications where it is necessary to ensure proper alignment between a gearbox and a driven shaft, Brevini's in-line and right angle shaft mounted planetary gearboxes provide the ideal solution.
The ability of the compact and efficient shaft mounted gearboxes, not only to provide alignment between shafts, but also their flexibility of use and the fact that no machining is required to mount them to frames, are all major factors in their widespread use across all industry sectors. Complementing these user benefits is the flexibility offered by two different types of shaft configurations: hollow shaft for shrink disc connection or keyed cylindrical female shaft (FP type).
|
|
Frame sizes: 60 mm, 130 mm, 200 mm
Max. speed: 200 r/min (200 mm-type: 110 r/min)
Max. thrust force: 100-4000N
Repetitive positioning accuracy: ±0.004°
Max. permissible torque: 0.9Nm - 50 Nm
Resolution: microstep 0.002-0.04°/step
Power supply: 230V AC for 130 mm/200 mm-type, 24V DC for 60mm-type
Marking: CE, UL and cUL
|
|
|
Wide selection of sizes, high thrust capacities and broad range of mounting flexibility. Maximum dynamic thrust capacities range from 125 lbs to 4700 lbs. Strokes in any incremental length up to 60 inches depending on body size. Conform to both NFPA and ISO industry mounting standards.
|
|
|
Rod type, single-axis robot YMS series features in low cost and yet high performance. Its use in combination with the ERCD controller which has an additional pulse train input function widens versatile application range.
|
|
The PODIUM UNIT FOR CAGE Of ELEVATOR includes/understands:
A cast solid framework
Extensible cross-pieces
Slides of back extension
Folding and adjustable mountings in height
Two extensible beams of safety in length retained by chains
A railing partly low
A plywood ép flooring. 30 mm
In option:
Trap door of access, Scale of nonfolding access, Flooring on the beams
Dimensional specifications:
Width of 1.60 m to 2.60 m (adjustable with the step of 5 cm)
Depth of 1.60 to 2.40 m (adjustable with the step of 1 cm)
Height from 2.50 to 3.70 m (adjustable with the step of 10 cm)
Working loads:
Overload circulation: 180 daN/m ²
Height of maximum form: 3.80 m (150 daN/m ²)
|
|
|
Verimation Technology, Inc. is a leading manufacture of Ultrasound Test Systems for automotive applications. This method of Non-Destructive Testing is very accurate and reliable. Testing is performed by coupling short bursts of high frequency sound waves to the test part. The wave patterns are then analyzed and test results are generated. This method of testing can find internal flaws and analyze material properties without cutting or destroying the part.
|
|
Vertical Shaft Kiln
Application : Clinker, Lime stone, Minerals
Vertical Shaft Kiln technology
Continuous Process
Allowable temperature up to 1500º .
Sub-drive through Vertical Mounted Gear Box.
Sub-divided in to High alumina fire bricks
Heavy duty Rotary Grade
Capacity : 2 - 10 ton per hour
|
|
Brand Name:
EBI
Country of Origin:
China (mainland)
Key Specifications/Special Features:
Superior sealing
Double-row ball types & ball/roller types
OEM/ODM drawings or samples accepted
Primary Competitive Advantages:
Price
Quality Approvals
Main Export Markets:
Worldwide
|
|
Vertical machining of shafts up to 1000 mm length
The machining of shaft-type components turned on its head.
The VTC is used to vertically machine shafts and shaft-type components of up to 1000 mm length. The EMAG tool turrets allow for 4-axis turning operations and also handle the task of loading and unloading the machine ... and more
|
|
Linear Thrusters Pneu-Moment
For smooth, guided motion. A durable housing with guide shafts keeps our Linear Thruster from rotating and allows it to carry higher loads. Choose from two different models. A choice of stroke lengths and a wide variety of catalog options make the Bimba Linear Thrusters easy to use and ready to order.
The Benefits of the Linear Thrusters Pneu-Moment Include:
Bimba stainless steel body air cylinders for long, reliable life
Optional magnetic piston for use with Hall Effect or Magnetic Reed Switches
Optional adjustable cushions for smooth deceleration of load at end of stroke
Optional internal or external bumpers to absorb shock or adjust stroke
Easily accessible ports
|
|
Rod Lock Cylinders
* The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut-down.
* The rod lock air cylinder has dowel pins that ride in the cam groove. When air pressure is present, piston actuates and dowel pins follow cam to open position, allowing piston rod to travel freely through clamp. In the absence of pressure, the spring actuates the piston and dowels follow to closed position, activating the rod clamp.
* The Rod Lock is not a safety device. It cannot be used for intermediate stopping; the cylinder is designed to prevent drift from a stationary position.
* Load weight must not exceed the stated holding force for the cylinder.
* Bore sizes are 3/4", 1-1/16", 1-1/2 ", and 2".
|
|
TRD Manufacturing
TRD Manufacturing Cylinders are recognized for their durability, high quality construction and long-lasting performance. Manufactured in several different types including, NFPA-interchangeable cylinders, specialized cylinders and accessories, TRD Cylinders represent a significant step towards Bimba's strategy to expand their industry-leading line of actuators.
Advantages of TRD Cylinders Include:
* Space saving design
* Many cylinder options to choose from
* Precision designed to provide accurate linear movement and positioning
* Other models include all stainless steel (SS) and electroless nickelplated (EN), and low friction for smooth operation (LF)
|
|
|
Tie Rod Cylinders feature the patented Enersorb® piston which provides exceptionally low breakaway, high energy absorption and reduced noise output. The floating bearing design allows for minor misalignment and surperior wear characteristics.
|
|
|
High load weight vs extension. Five bore sizes from 3/4" (20mm) to 2" (50mm). Stroke lengths up to 12" (305mm), Base or side mount. Linear ball or composite bearings. Options include switches, shock absorbers, stop collars and bumpers.
|
|
Linear ball bushings or PHDs TC fluoropolymer composite bushings are available in each series providing the best value with the least possible slide deflection. Four bushings allow two hardened precision ground shafts to move smoothly while supporting the tool plate and attached loads, providing rugged precise linear motion. .
Advantages: Wide variety of travels and sizes, oversize shafts with PHD's rugged TC bushings provide excellent value
|
|
| ... products without technical information |
| |
POLYTETRAFLON® - semi-finished products
Polytetra stocks a variety of semi-finished fluoroplastics and produces finished parts according drawing.
Materials:
The following semi-finished products are available:
PTFE virginal
PTFE Compounds
TFM virginal
TFM Compounds
PFA und MFA
FEP
PCTFE
ECTFE
PVDF
Shapes of semi-finished products :
Panels, also available in special sizes
Pre-cut panels
Ground panels
Panels etched on one side
Foils, also pre-cut films
Foils, etched on one or both sides
Foils, etched and provided with adhesive agent as preparation for vulcanisation
Foils and films, self adhesive on one side (SKAP)
Pressed rods and tubes
Extruded rods and tubes
Ground rods and tubes
Isostatically pressed blanks
Qualities:
On demand we supply you with those qualities of semi-finished products that are most specific to your respective field of application. In this context we consider the powder quality, the manufacturing method as well as additional treatments (tempering, repressing etc.)
Our strong points :
PTFE and TFM Compounds
RULON®
applied consulting services
proprietary fabrication with well-equipped mechanical prodcution
|
|
GEHR PPS
The linear Polyphenylensulfide belongs to the semi-crystalline materials and offers a very high mechanical capacity, thermal- and chemical resistance distinguished at the same time (usual operating temperature up to approx. +300 °F), high dimensional stability and creep strength.
The LOI belongs to the highest of the Polymers. By the reinforcement with
glass fibres strength is achieved, which is comparable with light metal. PPS
closes the gap between the technical synthetics and PEEK with its strength
and economy.
Properties:
- very high strength and rigidity
- high hardness
- high thermostability
- high dimensional stability
- very high chemical resistance
- very good insulating properties
- high weather resistance
- high resistance to hydrolysis (only PPS virgin)
Applications:
Components in the machine-making, pump parts, fan parts, impellers, parts
in the fuel and automotive sector.
GEHR PPS-40GF
The 40% glass fibre reinforced PPS has an improved dimensional stability
and higher stiffness which can be compared with light metal applications.
Usual operating temperature up to approx. +460 °C.
Properties:
- high thermal resistance
- great dimensional stability
- higher surface stiffness
|
|
GEHR ECTFE (Halar®)
Ethylen-Chlortrifluorethylene exhibits an extraordinary impact strength at temperatures ranging from -104 °F to +302 °F. A great part of the product properties attributes to the very smooth surface and differentiates HALAR® from other fluoropolymers. Due to the fact that E-CTFE is very pure, this material is being used to process chemicals and ultrapure water for the semiconductor industry.
Also the permeation resistance to oxygen, carbon dioxide, chlorine gas and hydrochlorid acid is 10 to 100 times better than PTFE.
Characteristics:
- extremely high impact strength (up to -105 °F) no break on notched or than PTFE unnotched IZOD impact test
- much more dimensional stability
- very good sliding properties
- good insulation properties
- food safe
- very good weather resistance
- high density
- high resistance to radiation
- limited protection against stress
- very high chemical resistance cracking at temperatures > 284 °F
- self-extinguishing
- very low moisture absorbtion at < 0.1%
Applications:
Parts which come in contact with aggressive materials (machinery building industry),
lining of tanks, pumps, flanges, fittings, parts in centrifuges and control engineering
industry etc...
|
|
PTFE
Virgin and filled Ptfe rods, sheets,
moulded tubes, tapes, even in special
materials for high prestations (Diflon D).
Available in stock finished products.
|
|
| ... products without technical information |
| |
|
Safety Locks similar to Safety Catchers and Safety Brakes are used against failure of lifting members. But in contrast to those they are not suitable to decelerate masses or to dissipate kinetic energy. On the other hand, the rod displacement to build up the holding force is very small, so that this units can be used for a approximitive positioning tasks as well. Furthermore this design principle allows compact solutions even for small rod sizes (smaller than for Safety Catchers). In the field of pneumatic clamping devices the Safety Locks are providing the absolutely highest holding forces in relation to housing dimensions.
|
|
|
At the very latest when, because of a power failure (intentional or not) or a malfunction something has to be done to safeguard man and machine, hydraulic clamp Ratio-Clamp® - the clamping device from Hänchen - i | | |
