|
|
| The TIPO B machines are designed to comply with the different requirements when automatically processing in one cycle large plates and medium/high thicknesses, ensuring high quality, precision, productivity and flexibility. These lines are flexible CNC centers capable of complying with the requirements of both traditional steel fabricators and all types of industry requiring flat components in steel for their particular needs. Besides punching and plasma cutting units, daisy wheel marking unit, drilling/milling head, automatic tool changer , oxy-cutting unit and automatic unloading devices are also available. The plate positioning is granted by two carriages with pincher assuring high precision even when heavy plates are processed. |
|
Stable and robust monobloc design virtually eliminates distortion (one-piece body and fixed jaw).
-The clamping mechanism type can be changed at any time as required.
Any type of vise may be combined with any type of clamping mechanism!.
-The movable jaw can easily be removed to clean the vise body (by pulling out the positioning pins).
-Optional angle driver available.
-Optional swivel base available.
-Many accessories available
The following clamping mechanism are available:
- Manual clamping mechanism with hydraulic power booster.
- Manual clamping mechanism with mechanical power booster.
- Hydro-pneumatic (air over oil) clamping mechanism (6-7 bar).
The spindles are available with adjustable power control. This allows you to preset the clamping pressure before operating the vice. |
|
MEASURING PLUG FOR INSPECTING BORE DIAMETERS
M1 Star is a highly advanced line of measuring plugs developed by TESTAR, a MARPOSS division, for inspecting bore diameters.
The M1 Star MBG (Mechanical Bore Gauge) is the ideal manual instrument for precision measuring of inside diameter, ovality or taper. |
|
Features:
- Range .248" - .505"
- Complete set with 3 range extensions and assembly tool
- The world smallest self-aligning dial bore gage
- Gaging pin travel (live end) .010" standard (.016" maximum)
- Gage is supplied with .0001" graduation dial indicator and storage case
- Optional carbide contacts and centralizers |
|
The CMS non-contact capacitive based hole and countersink measurement system has been established as the benchmark in measuring critical holes for military and commercial aircraft manufacturers around the world. Based on its ease of use, speed (measurement accomplished in a few seconds) and extreme accuracy ( /- 5 microns),
It has gained in popularity at various Airbus locations throughout Europe. The CMS system is particularly well adapted to the measurement of tapered holes based on its multi-sensor (48-sensor) approach to inside diameter mapping.
The addition of the CMS product line is a natural extension for Capacitec as they are currently the market leader in the supply of capacitive non-contact gap and displacement measurement sensor systems to the Aerospace market.
For further information, please contact :
Capacitec Europe
16 Rue Sejourné- 94044 Creteil – France
(33) 1 43 39 48 68
eurosales@capacitec.com
|
|
Tubular Inside Micrometer:
- Standard rod-type micrometer
- Measuring range: 50 to 1000 mm with various models
Borematic Holtest: Allows stable measurement of inside diameters with three contact points.
Holtest: Allows stable measurement of small-hole inside diameters with two or three contact points. |
|
XTD
• SYLVAC measuring system patented
• LCD display 6 mm
• Measuring range 2 - 300 mm
• Tungsten carbide anvils from 12.5 mm
• Blind bore measurement from 2 to 6 mm and from 12.5 mm
• Fixed anvils
• Rings always included
• UKAS certificate with all rings
• UKAS certificate with each gauge
• Manufactured according to DIN863
XTH
• SYLVAC measuring system patented
• LCD display 6 mm
• Measuring range 2 - 300 mm
• Tungsten carbide anvils from 12.5 mm
• Blind bore measurement from 2 to 6 mm and from 12.5 mm
• Fixed anvils
• Rings always included
• UKAS certificate with all rings
• UKAS certificate with each gauge
• Manufactured according to DIN863 |
|
Internal measuring of bores is more demanding than external measurement of workpieces. Not
only the tight tolerances given for the measuring job must be respected, but also the measuring
components that have a direct influence on the uncertainty of measurement must be designed
in such a way that they can enter into the bore to be checked. |
|
| ... products without technical information |
| |
| The pumps are employed for public water applications, water control at construction sites and in mines, and fountains. Our range of submersible pumps handles bore hole sizes from 8” to 12”, capacities up to 580 m3/h and heads up to 450 m. |
|
LEROY-SOMER offers a huge range of centrifugal electropumps designed
for bore holes: drainage pumps, surface pumps with automatic
priming, submersible pumps. |
|
| ... products without technical information |
| |
For straightness measurement of bores and bearing journals, both in production and in the field. Very stable construction for highest measurement accuracy. Measures both open and closed bearing pockets with equal simplicity. Handles up to 150 measurement positions.
Typical applications: Crankshaft and camshaft bearings in diesel engines, bearing journals and hull penetrations in propeller shaft installations, workpiece positioning in machine tools. |
|
The L-705/L-706 laser systems are highly accurate, easy-to-use bore alignment lasers that can be used for virtually any bore alignment application. Bores ranging from 1.5" (38.1 mm) to 36" (914 mm) or more can easily be accommodated.
The L-705 is used for bore alignments out to 50 feet (15 M) and the L-706 is used from 50 to 110 feet (15 M to 33.5 M). Both lasers feature battery operation and micrometer-controlled angular adjustments, and both lasers are centered to their housings to within .0005" (.013 mm).
Our competitively priced L-705 Laser Borescope system is the fastest and most accurate extruder alignment system on the market. Its patented self-centering target and simple laser fixture are so easy to use you can have misalignment data in less than 10 minutes, including setup!
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Robot deburring solutions
Intelligent solutions to save time and costs
Have a look at our Videos !
As insider, you know that being at the cutting edge of automation is crucial in special machine construction. When installing pneumatic spindles and build-in motors by MANNESMANN DEMAG Drucklufttechnik KG , you can be sure that state-of-the-art technology, maximum reliability and serious top-rate quality will bring the key advantages to your automation
process.
Robot tools for deburring
Our product range offers tailor made solutions for fettling and deburring of different materials. The cutting-edge programm offers problem solving solutions like
- High revolution speed deburring and grinding spindles for robots
- brushing motors for robots
- filing tools for robots
- countersinks for robots
- angle -countersinks for robots working in difficult to access areas
- angle grinders and angle brushing motors for robots
- grinding spindles with compliance for robots and CNC machines
The revolution speed range varies from 100.000 to 120 rpm.
In addition to the the classic grinding and deburring spindles the brand new non-lubricated turbine spindles offer excellent surface finishing opportunities.
|
|
| Enidine's Large Bore Hydraulic Shock Absorbers offer a wide variety of configurations including bellows, clevis mounts and safety cables. Standard, adjustable or custom-orificed, non-adjustable models are available as well as optional fluids and seal packages to expand operating temperature ranges. Units can be complemented with specialized surfaces and attachment accessories. For easy maintenance, all sizes of Enidine's Large Bore Hydraulic Shock Absorbers are repairable. |
|
The TITAN 3-piece ball valve, with full bore, is used as an ON-OFF valve for: chemical, water and pneumatic plants, for installations with high interchangeability of components and for steam up to 10 bar. The valves are designed and manufactured in order to allow inspections and maintenances on line by extracting only the body.
|
|
|
|
