|
|
Characteristic and Use:
1.Adopt inverter technology, used IGBT components, exactly feedback control. To cut metal with air, being compute, light weight.
2.Various protection functions, adopting untouched incision to cut metal with rusty spot or paint easily.
3.Suitable for discretionary curve cutting in different metal panel as stainless steel carbon steel,copper and aluminum.
4.Apply to kitchen utensils, fitment, maintaining and hardware craft.
See more,visit our website!
|
|
|
Manual plasma cutting units for applications in trade and industry are suitable for straight, profile, template, contour and bevel cutting in all positions, for hole piercing as well as for plasma gouging, hole and slot cutting.
|
|
RTC 60 to 150
Universal applicability for steel, special steel, aluminium non-ferrous metals and other electrically conducting metals - even with painted surfaces
Optimum cutting quality thanks to
- precisely regulated and continuously adjustable cutting current
- high performance reserves - even at the critical end of the cut
- exact control with voltage compensation
Maximum economic efficiency from high cutting speed at the same time as long service life and optimum cutting quality
Dependable ignition using REHM Zetronik is possible both for contact and distant cutting - for hose bundle lengths up to 20 m
Long service life thanks to shutdown of the controlled pilot current during cutting, soft start function, and micro-controlled cutting current with patented transistor module
Maximum safety for man and equipment thanks to monitoring of torches and wearing parts, with active early warning and automatic safety shutdown.
|
|
Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow.
Solid-state, constant-current design offers consistent 12 amp cutting arc for continuous quality cutting up to 3/16 in steel in steel.
Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.
LVC™ line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.
|
|
|
|
|
|
AirForce™ 250ci
Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.
Designed to cut up to 1/4" mild steel, the AirForce™ 250ci is powered by standard household current (115 VAC). A built-in air compressor and lightweight inverter power supply make this plasma cutter the most convenient, totally portable cutting system available. The AirForce™ 250ci excels at cutting sheet metal and 1/8" mild steel, and can even sever 1/4" steel.
AirForce™ 500i
The AirForce™ 500i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. This power source adapts to your work site by operating from either 115 or 230 VAC power through standard household outlet using the Multi-Voltage Plug (MVP).
AirForce™ 700i
The AirForce™ 700i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The Airforce™ 700i plasma cutting system is excellent for light and heavy industrial users. Automated operations are also well within its range. Unit is compatible with engine-driven welders when powered with a 240 V generator power outlet of 8 kW or more.
|
|
K1756-1 Pro-Cut 25 w/15 ft Torch 115/230/1/50/60
Industrial Price: 1596.00 (USD)
The Pro-Cut® 25 is one handy cutting tool to have around. Ideal for hobby, farm, HVAC, autobody shop or sheet metal fabrication, this professional-grade plasma cutting system lists a host of features that will make your metal cutting jobs safe, fast and easy! Weighing in at only 29.5 lbs. (13.4 kg), it generates 25 amps of cutting power capable of cutting electrically conductive materials up to 3/8" (9.5 mm) thick.
Patented Vortech™ technology torch consumables are built to deliver efficient performance and long life. Parts-in-Place™ torch safety features prevent the torch from operating when sensing parts are not in the proper position. Auto-reconnect feature properly sets up the machine when you plug into 115 volt or 230 volt input power.
|
|
PLASMA CUT 26i COMPRESSOR
PLASMA CUT 26i compressor, a single phase IGBT based inverter power source with built-in professional compressor, ensures an extraordinary high quality cutting of any metal and perforated lamination sheet. Its lightness and incorporated compressor allow its portability and make it absolutely necessary for any maintenance work whenever lacking an air compressor source. Powerful, compact and light, PLASMA CUT 26i compressor is the ideal solution for installers, blacksmiths, car body repair, plumbing and building industry.
- Digital electronic control to ensure an excellent cutting
- Torch with pilot arc
- Over-undervoltage protection
- Innovative and user friendly design
- Control panel protected against accidental impacts
|
|
CPPT 300/R
Excellent welding characteristics
Rapid microprocessor controlled inverter allows an optimum adaptation of the weld current to the most different tasks
Modern technology for plasma powder welding
Plasma powder weld parameter list in the robot controller
Exact reproducibility of all relevant parameters stored in the robot controller. No intermediate control, therefore fewer controllers, less adjustment work, fewer cable connectors.
Flexible use of the plasma powder welding machine
An optimally matched parameter list for each weld seam of a workpiece can be produced and saved at any time
Infinite adaptation of arc capacity and weld speed to the material characteristics without additional programming (software option “Parameter interpolation“)
Long service life of the welding machine
due to the robust construction, fan on demand and carefully selected components.
|
|
The latest generation of welding equipment can be programmed with specific process preferences of your individual choice or for the actual welding processes. Based on a solid state power source, it weighs just 1/80 of the 70 year old ancestors but has more power. Our different plasma cutting equipment enables you to quickly and accurately cut all types of metals
|
|
|
|
|
|
The Migatronic Zeta plasma cutters featuring opera-tional comfort, automatic pilot-arc control, and ad-justable gas flow are suitable for both stationary
use and on-site repairs. Zeta uses compressed air as the plasma gas, thereby enabling it to be
connected to existing compressors.
Precise cuts
The two Zetas have stable ignition of the pilot arc and perform precise cuts in all conductive metals.
The machines
are prepared for use with generators and come with
various sizes of nozzles for highquality cuts.
Machine profile
Excellent
The welding machine is primarly designed and optimised for welding in this material.
Good
The welding machine is secondarily designed for welding in this material.
Applicable
The welding machine is applicable for simple welding operations using this material.
Delta welding machines:
Zeta 40 (weighing 19 kilograms) is mono-phase and makes precise cuts in plate thicknesses up to 8 mm. Zeta 40 has PFC (Power Factor Correction)
function for full output by means of 16 A mains fuses.
Zeta 60 is three-phased and makes quality cuts in materials up to 12 mm.
|
|
PF1
Improved cutting quality
* Up to 30% improved maximum cutting capability
* Up to 20% improved cutting surface coarseness.
* Up to 10% reduced bevel degree
* Drastically reduced dross at thin plate by pulse cutting
* Forced air stream up to the end of electrode
|
|
Tecnoplasma 52
Selco%u2019s new low-cost plasma cutting generator using electro-mechanical technology, has an innovative, modern design.
It can perform good quality cuts up to 15 mm carbon steel.
As it does not consume much electrical power and compressed air, this tool is ideal for cutting conductive materials on-site and in the workshop.
It is more versatile, simpler, quicker and more practical to use than traditional mechanical tools and oxyacetylene welding torches.
The pilot arc is accurately struck thanks to the high frequency device, and is always present while the torch button is pressed, enabling you to cut grilles and work pieces of complex shapes. If used off its nominal parameter range, a thermal safety device protects internal parts against malfunctions.
Two alarms are also provided, one to cut off the output voltage when the torch is not completely assembled and the other to prevent operation with incorrect compressed air pressure.
|
|
| ... products without technical information |
| |
|
Tough, reliable and easy to use. Vemeer is the inventor and the world's leading seller of stump-cutting equipment. The reason is simple - Vermeer offers machines that are tough, reliable and easy to operate. With features like the exclusive AutoSweep system, beltless cutter-wheel drive systems, Pro Series teeth and state-of-the-art remote controls, the Vermeer name has become synonymous with innovation. Proven on virtually every type of hardwood stump, the Vermeer line of labor-saving stump cutters lets you do it all.
|
|
Features:
- Cutterwheel is equiped with FERMEX teeth
- Very solid construction
Advantages:
- Easy to operate
- Easy to transport
- Long lifetime
Benefits:
- 30 % more productivity
Additionally to the well known piling machines Vermeer MT also supplies auxiliary equipment. Examples are the Easy Cutter (pipe cutting system), drop weights (750 - 4000 kg class,with or without connections),
tubes (114 up to 508 mm) and swaging units.
Swaging units expand tubes in such a way that the original
tube size fits into the swaged end giving the connection a
high quality after welding it.
It also saves labour against other coupling methods like connection rings.
The TU-series Vermeer MT swaging units can be supplied as Standard
and as a Wide Range model.
Both systems are suitable for swaging pipes that are regularly used in the foundation industries.
|
|
Features:
- Cutterwheel is hydraulicly driven
- Cutterwheel is equiped with FERMEX teeth
- Optimal balance between motor, pump, hydraulic motor
and cutterwheel
Advantages:
- Easy to use
- Solid construction
- Highest periphirical speed
Benefits:
- up to 70% more productivity
- 20% less cost
FERMEX, manufactured by Vermeer MT, has 6 standard models of stump cutters.
It is possible to chose from hydraulicaly or mechanicaly driven machines, and machines which use the P.T.O. of a tractor or it's own power unit.
FERMEX stump cutters are designed and built for the professional user.
The machines are robust, have few wear parts and are making a high production.
The applied teeth/ pockets system results in quick mounting because
no gauges are required.
The locking of the teeth combined with the pockets lead to safe usage.
The Vermeer MT teeth are provided with tungsten carabide plates that extend the lifetime.
|
|
The Vermeer HG200 compact horizontal grinder turns wood chips, construction debris and green waste into a range of usable end products that include ground cover, landscape mulch, animal bedding and compost. The unit provides residential tree care contractors, sawmills, home builders and contractors with an economical alternative to incurring disposal fees or stockpiling unusable chips.
Powered by a reliable 85 hp (63 kW) Cummins diesel engine, the compact HG200 has a gross weight of 5500 pounds (2495 kg), making it easy to transport in residential areas.
|
|
BVE 55
Crusher stamping machine for green, plant waste, small sizes, sheets, spices, branches Ø maxi 4.72in. Rotor of 24 flails
Either a mechanically powered roller needing manual control or hydraulically powered roller with electric regulation.
P3P, 540 rpm
18 HP gasoline, road trailer< 750 kg not slowed down systeme
22 HP gasoline, road trailer routière < 750 kg not slowed down systeme
22 HP diesel, road trailer< 1100 kg slowed down systeme
|
|
VIPER 40 DRI
The VIPER, equipped with a mixed rotor combining 14 hammers and 4 knives provides the performance of a large Multi-Vegetation Chipper/Shredders on medium-scale sites requiring the grinding of branches of a maximum diameter of 17cm, simultaneously with the grinding of plants. Ever so practical, its wide and low-slung loading hopper is equipped with a standard metallic feed belt. Ease of use and safety are also ensured on a daily basis due to its electric control system. Finally, reinforced in high quality noise-proof materials, it offers appreciable acoustic performance.
|
|
COUGAR 17 DR EVO
The COUGAR, equipped with the patented mixed rotor system and an economical and long-lasting LOMBARDINI 17 HP diesel engine, will quickly become a must for its users! Highly effective as a result of its 6 hammers, without greasers, and its 2 knives, the COUGAR also proves to be compact and practical on its 750kg trailer
|
|
COUGAR 18 ER EVO
The COUGAR, equipped with the patented mixed rotor system and a powerful B&S 18 hp engine, will quickly become a must for its users! Highly effective as a result of its 6 hammers, without greasers, and its 2 knives, the COUGAR also proves to be compact and practical on its 500kg trailer.
The mixed rotor developed and patented by SAELEN combines knives and hammers to shred branches and all types of organic matter effectively.
|
|
Branches cutter (Ø max 200mm)
Road trailer with independent engine (Kubota 60HP)
Speed regulation, ABS with patented system
|
|
THE CRUSHERS REFINERS BIOMASS
Crusher GLOUTON
For the crushing and the refining of vegetable waste and the shredding of branches
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
