|
|
Characteristic and Use:
1.Adopt inverter technology, used IGBT components, exactly feedback control. To cut metal with air, being compute, light weight.
2.Various protection functions, adopting untouched incision to cut metal with rusty spot or paint easily.
3.Suitable for discretionary curve cutting in different metal panel as stainless steel carbon steel,copper and aluminum.
4.Apply to kitchen utensils, fitment, maintaining and hardware craft.
See more,visit our website!
|
|
|
Manual plasma cutting units for applications in trade and industry are suitable for straight, profile, template, contour and bevel cutting in all positions, for hole piercing as well as for plasma gouging, hole and slot cutting.
|
|
RTC 60 to 150
Universal applicability for steel, special steel, aluminium non-ferrous metals and other electrically conducting metals - even with painted surfaces
Optimum cutting quality thanks to
- precisely regulated and continuously adjustable cutting current
- high performance reserves - even at the critical end of the cut
- exact control with voltage compensation
Maximum economic efficiency from high cutting speed at the same time as long service life and optimum cutting quality
Dependable ignition using REHM Zetronik is possible both for contact and distant cutting - for hose bundle lengths up to 20 m
Long service life thanks to shutdown of the controlled pilot current during cutting, soft start function, and micro-controlled cutting current with patented transistor module
Maximum safety for man and equipment thanks to monitoring of torches and wearing parts, with active early warning and automatic safety shutdown.
|
|
Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow.
Solid-state, constant-current design offers consistent 12 amp cutting arc for continuous quality cutting up to 3/16 in steel in steel.
Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.
LVC™ line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.
|
|
|
|
|
|
AirForce™ 250ci
Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.
Designed to cut up to 1/4" mild steel, the AirForce™ 250ci is powered by standard household current (115 VAC). A built-in air compressor and lightweight inverter power supply make this plasma cutter the most convenient, totally portable cutting system available. The AirForce™ 250ci excels at cutting sheet metal and 1/8" mild steel, and can even sever 1/4" steel.
AirForce™ 500i
The AirForce™ 500i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. This power source adapts to your work site by operating from either 115 or 230 VAC power through standard household outlet using the Multi-Voltage Plug (MVP).
AirForce™ 700i
The AirForce™ 700i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The Airforce™ 700i plasma cutting system is excellent for light and heavy industrial users. Automated operations are also well within its range. Unit is compatible with engine-driven welders when powered with a 240 V generator power outlet of 8 kW or more.
|
|
K1756-1 Pro-Cut 25 w/15 ft Torch 115/230/1/50/60
Industrial Price: 1596.00 (USD)
The Pro-Cut® 25 is one handy cutting tool to have around. Ideal for hobby, farm, HVAC, autobody shop or sheet metal fabrication, this professional-grade plasma cutting system lists a host of features that will make your metal cutting jobs safe, fast and easy! Weighing in at only 29.5 lbs. (13.4 kg), it generates 25 amps of cutting power capable of cutting electrically conductive materials up to 3/8" (9.5 mm) thick.
Patented Vortech™ technology torch consumables are built to deliver efficient performance and long life. Parts-in-Place™ torch safety features prevent the torch from operating when sensing parts are not in the proper position. Auto-reconnect feature properly sets up the machine when you plug into 115 volt or 230 volt input power.
|
|
PLASMA CUT 26i COMPRESSOR
PLASMA CUT 26i compressor, a single phase IGBT based inverter power source with built-in professional compressor, ensures an extraordinary high quality cutting of any metal and perforated lamination sheet. Its lightness and incorporated compressor allow its portability and make it absolutely necessary for any maintenance work whenever lacking an air compressor source. Powerful, compact and light, PLASMA CUT 26i compressor is the ideal solution for installers, blacksmiths, car body repair, plumbing and building industry.
- Digital electronic control to ensure an excellent cutting
- Torch with pilot arc
- Over-undervoltage protection
- Innovative and user friendly design
- Control panel protected against accidental impacts
|
|
CPPT 300/R
Excellent welding characteristics
Rapid microprocessor controlled inverter allows an optimum adaptation of the weld current to the most different tasks
Modern technology for plasma powder welding
Plasma powder weld parameter list in the robot controller
Exact reproducibility of all relevant parameters stored in the robot controller. No intermediate control, therefore fewer controllers, less adjustment work, fewer cable connectors.
Flexible use of the plasma powder welding machine
An optimally matched parameter list for each weld seam of a workpiece can be produced and saved at any time
Infinite adaptation of arc capacity and weld speed to the material characteristics without additional programming (software option “Parameter interpolation“)
Long service life of the welding machine
due to the robust construction, fan on demand and carefully selected components.
|
|
The latest generation of welding equipment can be programmed with specific process preferences of your individual choice or for the actual welding processes. Based on a solid state power source, it weighs just 1/80 of the 70 year old ancestors but has more power. Our different plasma cutting equipment enables you to quickly and accurately cut all types of metals
|
|
|
|
|
|
The Migatronic Zeta plasma cutters featuring opera-tional comfort, automatic pilot-arc control, and ad-justable gas flow are suitable for both stationary
use and on-site repairs. Zeta uses compressed air as the plasma gas, thereby enabling it to be
connected to existing compressors.
Precise cuts
The two Zetas have stable ignition of the pilot arc and perform precise cuts in all conductive metals.
The machines
are prepared for use with generators and come with
various sizes of nozzles for highquality cuts.
Machine profile
Excellent
The welding machine is primarly designed and optimised for welding in this material.
Good
The welding machine is secondarily designed for welding in this material.
Applicable
The welding machine is applicable for simple welding operations using this material.
Delta welding machines:
Zeta 40 (weighing 19 kilograms) is mono-phase and makes precise cuts in plate thicknesses up to 8 mm. Zeta 40 has PFC (Power Factor Correction)
function for full output by means of 16 A mains fuses.
Zeta 60 is three-phased and makes quality cuts in materials up to 12 mm.
|
|
PF1
Improved cutting quality
* Up to 30% improved maximum cutting capability
* Up to 20% improved cutting surface coarseness.
* Up to 10% reduced bevel degree
* Drastically reduced dross at thin plate by pulse cutting
* Forced air stream up to the end of electrode
|
|
Tecnoplasma 52
Selco%u2019s new low-cost plasma cutting generator using electro-mechanical technology, has an innovative, modern design.
It can perform good quality cuts up to 15 mm carbon steel.
As it does not consume much electrical power and compressed air, this tool is ideal for cutting conductive materials on-site and in the workshop.
It is more versatile, simpler, quicker and more practical to use than traditional mechanical tools and oxyacetylene welding torches.
The pilot arc is accurately struck thanks to the high frequency device, and is always present while the torch button is pressed, enabling you to cut grilles and work pieces of complex shapes. If used off its nominal parameter range, a thermal safety device protects internal parts against malfunctions.
Two alarms are also provided, one to cut off the output voltage when the torch is not completely assembled and the other to prevent operation with incorrect compressed air pressure.
|
|
| ... products without technical information |
| |
Colloid mill works with shearing，grinding high-speed stirring．Grinding process occurs in the relative movement between the two teeth with one revolving in high speed and another still，which makes the material between the teeth receive strong shearing and abrasion in addition to high frequency vibration and high speed swirl．The above forces effectively evenly disperse，emulsify，smash the material.
JM-F/L is a new equipment that wet processes superfine grain．whichisusedto homogen。emulsify。mixand smash various semi-liquids．1iquids and latex emulsion.
|
|
The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel
Changing the gap setting allows the user to modify the shear rate applied to the fluid and achieve the desired process results
Indicator dial defines gap-setting position and ensures process repeatability
This machine is designed to handle a wide range of applications and empowers the user to make simple adjustments to achieve the precise product qualities they require
Vertical or horizontal mounting position makes mill ideal for batch, batch-continuous or in-line applications
|
|
The mills of series 2000 have a modular design. Within the construction size the machines are convertible to the inline dispersing machines of series 2000.
Constant speed parameters and generator geometries allow an exact scale-up.
All machines are CIP- resp. SIP-suitable.
Design, materials and surfaces correspond to the recommendations of FDA resp. EHEDG.
There are different grinding tools available.
The drives can be adapted to the respective conditions like flow rate, power requirement, protection type or ex-protection.
|
|
Feature
1) This machine can mix all powder of powder is uniform.
2) The machine adopt outer-inner rotation and grain of powder is uniform.
3) The mixing barrel can be tilted freely at the angle of degrees for discharging and cleaning purpose.
4) The automatic stopping device can be set within the range of 0-60 minutes for automatic stopping.
5) Easy to operate, easy to wash, clean and move. It is very suitable for GMP food and pharmaceutical factories.
|
|
Application
Foodstuff, Feed, Dye, Pigment, Chemical, Spice, Fertilizer...etc.
Feature
1) The inner and outer layers dual-spiral "S" sign crossing of upper and lower mixing type is adopted. Mixing effectiveness is good. Speed is fast. Powder dust will not fly in operation.
2) Complete and through blending of raw materials by ribbon agitator
which create two layers and counter movement of flows.
|
|
Feature
1) The mixing barrel and blades are made of stainless steel, always keeping clean and away from dirt. The mixing barrel can be tilted freely at the angle of 0X~360X degrees for discharging and cleaning purpose.
2) The safety device can protect the safety of operator and machine. The automatic stopping device can be set with in the range of 0-60 minutes for automatic stopping.
Application
Foodstuff, General chemicals, Feed, Plastic, Dye, Cosmetics, Drugs, Plastic powder, Resin powder addition...etc.
|
|
| ... products without technical information |
| |
|
|
|
|
GibbsCAM MTM (Multi-Task Machining) was specifically designed to address the CNC programming requirements of multi-task machine tools, providing powerful programming tools that are easy to learn and use with the ultimate in flexibility and configurability. Machining processes are easily defined with GibbsCAM's intuitive graphical user interface that provides seamless access to both turning and milling capabilities. And GibbsCAM's associativity allows operations to be updated easily when modifications are made. Factory-supplied post processors output multi-flow NC code complete with utility operations and sync codes.
Machine-Specific Setup
Multi-task machine tools represent some of the most diverse machine tool configurations available today. With GibbsCAM MTM, your machine tool's specific configuration is captured by GibbsCAM's factory-supplied settings so that you are accurately programming all its capabilities. This way you can be sure that you are taking full advantage of your machine tool for maximum productivity.
Multiple Turrets/Spindles
Today's multi-task machine tools incorporate a wide variety of spindle and turret combinations with no end in sight. A two spindle, two turret configuration is fairly common with machines with more than two spindles or turrets becoming more and more common. GibbsCAM MTM supports an unlimited number of turrets and spindles allowing you to keep pace with advances in multi-task machines.
|
|
|
|
|
|
PartMaker Mill gives you what you really need from a CAM system - the ease of use to program your parts quickly with the power and flexibility to handle even the toughest jobs. PartMaker applies a Knowledge Based Machining approach to capture your shop specific knowledge about feeds and speeds, tooling and repetitive processes to speed programming. PartMaker's Windows developed user interface has easy to follow graphics to guide you through every step of programming a part.
PartMaker's Visual Programming Approach makes the software quicker to learn and easier to use. By generating edit-free CNC programs the first time and proving out the results on screen with PartMaker you will reduce programming and setup time resulting in a significant savings of time and money! PartMaker Mill supports 2 1/2 axis, 3-axis, 4-axis, and 5-axis milling operations.
Key Features
Windows user interface assures quick learning
2 ½ Axis milling for pocketing and hole making
Automated programming of multi-piece machining and tombstone fixtures
3D Surface Machining capability including and roughing, finishing, remachining and projection machining strategies
4th Axis Rotary Milling of cylindrical features
5-Axis Prismatic and Surface Milling
Pictorial explanation simplifies parameter entry
Context sensitive help on hand
Tools Data Base manages tool inventory
Cycles Data Base combines tool and machining data into machining cycles
Automatic hole depth calculation
Materials library information files easily modified to meet shop practices
Optimum feed rates, spindle speeds and cycle times automatically applied
...
|
|
|
|
|
|
PartMaker applies a Patented "divide and conquer" programming strategy to simplify the programming of Multi-Axis Turn-Mill Centers with live-tooling. The software helps the operator break a complicated part surface into a set of planes or faces. Machining tasks, such as turning, plane milling and cylinder milling are carried out separately for each face in an intuitive manner.
Visual programming assures quicker learning and easier use. PartMaker supports most Turn-Mill centers currently available including models from manufacturers such as Hardinge, Mazak, Mori-Seiki, Eurotech, Hitachi Seiki, Nakamura, Miyano, Okuma and others.
PartMaker/Turn-Mill performs a full set of lathe operations: facing, turning, grooving and threading. Operations being performed simultaneously by seperate turrets or on separate spindles can easily be synchronized by just pointing clicking. PartMaker generates edit-free G-code programs with "Wait" or "Sync" codes automatically inserted. Index Milling/Drilling on the end of the part and on the outside diameter are included among the product's standard components.
Additional Milling capabilities of the software can be ranked in the order of sophistication as following: Polar Milling with X Tool, Polar Milling with Z Tool and XZC Continuous Milling on a Cylindrical surface. Another option is XYZC Milling for machines equipped with the Y-axis.
PartMaker allows you to take full advantage of the full range of your machines capabilities. PartMaker will save you money by decreasing both programming and cycle times. It will also let you program more complex parts than you could without it.
|
|
|
|
|
|
FeatureTURN
FeatureTURN includes the following features for part creation.
- Holes - You can create a variety of hole types aligned with the part's Z-axis. Simply enter hole dimensions to create any common hole type including counter-sink, counter-bore, reamed or tapped.
- Facing Feature - To face off the part, you simply enter the cut thickness and two diameter values.
- OD Turning Feature - You can create outer turning features from any two-dimensional geometry or curves. Round tool roughing is supported and you have precise control of entry and exit.
- ID Boring Feature - Bores are created from simple two-dimensional geometry or curves.
- Groove Feature - OD, ID and face grooves are created from curves or by entering dimensions that describe the groove's shape.
- Thread Feature - Both OD and ID threading features can easily be created from dimensional data. Tapered threads are supported and relief grooves can be conveniently generated within the thread feature. 2006 You can also thread along a form shape.
- Cutoff Feature - Cutoff feature includes optional chamfer and part catcher control.
- Bar feed feature - FeatureTURN provides support for both bar feeders and bar pullers..
- Sub-spindle Feature - FeatureTURN supports machines with sub-spindles.
FeatureTURN/MILL
FeatureTURN/MILL is an extension of FeatureTURN and incorporates both FeatureTURN and FeatureMILL2.5D With FeatureTURN/MILL, turning features and milling features can be conveniently ordered together in a single setup.
FeatureTURN/MILL provides several capabilities, including:
- Support for lathes with C and Y axis milling capabilities and sub-spindles.
- Drilling or milling features can be positioned on the face or on the OD of the part, and are easily programmed with the FeatureTURN/MILL feature wizard.
- FeatureTURN/MILL contains all the milling features of FeatureMILL2.5D, including holes, slots, pockets, grooves, sides and patterns.
- Milling features can be created on the OD and then wrapped around the lathe's Z-axis. This process takes the Y moves of a milling feature and translates them into C-axis rotations.
- Simulations accurately reflect the rotation of the part during machining so that you can verify precise toolpaths on your computer.
- Polar interpolation can be performed by FeatureTURN/MILL or by the control.
- FeatureTURN/MILL includes the same post processing capabilities as FeatureMILL2.5D and FeatureTURN. You simply create your features and let FeatureTURN/MILL take care of the NC code details.
|
|
Production Machining
SURFCAM Velocity gives the production manufacturer incredible functionality
Among other features, SURFCAM Velocity offers: TrueMill® High Speed Milling, 4/5 Axis Indexing, Function-Specific Operations, and Milling/Turning
|
|
|
|
|
|
ESPRIT SolidMillTurn® CAM Software
Multitasking Efficiency
Multitasking machine tools with mill, turn, and drill capabilities are increasingly popular in metalworking today. These sophisticated machines allow manufacturers to perform simultaneous milling and turning operations, on the front and back of a part, in a single setup. Mill-turn machines represent an enormous potential for profitability, but possess inherent programming challenges due to their complexity. The right CAM system is a key factor for success in the mill-turn equation. It’s a critical choice that determines the ultimate productivity of your machine investment.
Pre-packaged Software Solution
ESPRIT delivers a fresh, out-of-the-box approach to solving the issues that arise with programming complex multitasking machines, such a post processor writing and machine definition. Imagine programming your multitasking machine with a complete, pre-configured solution— developed in cooperation with the machine tool builders and tested extensively at the factory level. ESPRIT’s mill-turn prowess is the ultimate result of a collaboration with machine builders and DP’s focused software development for this specific class of machine tools. Trust ESPRIT to unlock the potential of your multitasking machine.
|
|
|
|
see the results for the following category : 
