|
|
Characteristic and Use:
1.Adopt inverter technology, used IGBT components, exactly feedback control. To cut metal with air, being compute, light weight.
2.Various protection functions, adopting untouched incision to cut metal with rusty spot or paint easily.
3.Suitable for discretionary curve cutting in different metal panel as stainless steel carbon steel,copper and aluminum.
4.Apply to kitchen utensils, fitment, maintaining and hardware craft.
See more,visit our website!
|
|
|
Manual plasma cutting units for applications in trade and industry are suitable for straight, profile, template, contour and bevel cutting in all positions, for hole piercing as well as for plasma gouging, hole and slot cutting.
|
|
RTC 60 to 150
Universal applicability for steel, special steel, aluminium non-ferrous metals and other electrically conducting metals - even with painted surfaces
Optimum cutting quality thanks to
- precisely regulated and continuously adjustable cutting current
- high performance reserves - even at the critical end of the cut
- exact control with voltage compensation
Maximum economic efficiency from high cutting speed at the same time as long service life and optimum cutting quality
Dependable ignition using REHM Zetronik is possible both for contact and distant cutting - for hose bundle lengths up to 20 m
Long service life thanks to shutdown of the controlled pilot current during cutting, soft start function, and micro-controlled cutting current with patented transistor module
Maximum safety for man and equipment thanks to monitoring of torches and wearing parts, with active early warning and automatic safety shutdown.
|
|
Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow.
Solid-state, constant-current design offers consistent 12 amp cutting arc for continuous quality cutting up to 3/16 in steel in steel.
Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.
LVC™ line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.
|
|
|
|
|
|
AirForce™ 250ci
Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.
Designed to cut up to 1/4" mild steel, the AirForce™ 250ci is powered by standard household current (115 VAC). A built-in air compressor and lightweight inverter power supply make this plasma cutter the most convenient, totally portable cutting system available. The AirForce™ 250ci excels at cutting sheet metal and 1/8" mild steel, and can even sever 1/4" steel.
AirForce™ 500i
The AirForce™ 500i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. This power source adapts to your work site by operating from either 115 or 230 VAC power through standard household outlet using the Multi-Voltage Plug (MVP).
AirForce™ 700i
The AirForce™ 700i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The Airforce™ 700i plasma cutting system is excellent for light and heavy industrial users. Automated operations are also well within its range. Unit is compatible with engine-driven welders when powered with a 240 V generator power outlet of 8 kW or more.
|
|
K1756-1 Pro-Cut 25 w/15 ft Torch 115/230/1/50/60
Industrial Price: 1596.00 (USD)
The Pro-Cut® 25 is one handy cutting tool to have around. Ideal for hobby, farm, HVAC, autobody shop or sheet metal fabrication, this professional-grade plasma cutting system lists a host of features that will make your metal cutting jobs safe, fast and easy! Weighing in at only 29.5 lbs. (13.4 kg), it generates 25 amps of cutting power capable of cutting electrically conductive materials up to 3/8" (9.5 mm) thick.
Patented Vortech™ technology torch consumables are built to deliver efficient performance and long life. Parts-in-Place™ torch safety features prevent the torch from operating when sensing parts are not in the proper position. Auto-reconnect feature properly sets up the machine when you plug into 115 volt or 230 volt input power.
|
|
PLASMA CUT 26i COMPRESSOR
PLASMA CUT 26i compressor, a single phase IGBT based inverter power source with built-in professional compressor, ensures an extraordinary high quality cutting of any metal and perforated lamination sheet. Its lightness and incorporated compressor allow its portability and make it absolutely necessary for any maintenance work whenever lacking an air compressor source. Powerful, compact and light, PLASMA CUT 26i compressor is the ideal solution for installers, blacksmiths, car body repair, plumbing and building industry.
- Digital electronic control to ensure an excellent cutting
- Torch with pilot arc
- Over-undervoltage protection
- Innovative and user friendly design
- Control panel protected against accidental impacts
|
|
CPPT 300/R
Excellent welding characteristics
Rapid microprocessor controlled inverter allows an optimum adaptation of the weld current to the most different tasks
Modern technology for plasma powder welding
Plasma powder weld parameter list in the robot controller
Exact reproducibility of all relevant parameters stored in the robot controller. No intermediate control, therefore fewer controllers, less adjustment work, fewer cable connectors.
Flexible use of the plasma powder welding machine
An optimally matched parameter list for each weld seam of a workpiece can be produced and saved at any time
Infinite adaptation of arc capacity and weld speed to the material characteristics without additional programming (software option “Parameter interpolation“)
Long service life of the welding machine
due to the robust construction, fan on demand and carefully selected components.
|
|
The latest generation of welding equipment can be programmed with specific process preferences of your individual choice or for the actual welding processes. Based on a solid state power source, it weighs just 1/80 of the 70 year old ancestors but has more power. Our different plasma cutting equipment enables you to quickly and accurately cut all types of metals
|
|
|
|
|
|
The Migatronic Zeta plasma cutters featuring opera-tional comfort, automatic pilot-arc control, and ad-justable gas flow are suitable for both stationary
use and on-site repairs. Zeta uses compressed air as the plasma gas, thereby enabling it to be
connected to existing compressors.
Precise cuts
The two Zetas have stable ignition of the pilot arc and perform precise cuts in all conductive metals.
The machines
are prepared for use with generators and come with
various sizes of nozzles for highquality cuts.
Machine profile
Excellent
The welding machine is primarly designed and optimised for welding in this material.
Good
The welding machine is secondarily designed for welding in this material.
Applicable
The welding machine is applicable for simple welding operations using this material.
Delta welding machines:
Zeta 40 (weighing 19 kilograms) is mono-phase and makes precise cuts in plate thicknesses up to 8 mm. Zeta 40 has PFC (Power Factor Correction)
function for full output by means of 16 A mains fuses.
Zeta 60 is three-phased and makes quality cuts in materials up to 12 mm.
|
|
PF1
Improved cutting quality
* Up to 30% improved maximum cutting capability
* Up to 20% improved cutting surface coarseness.
* Up to 10% reduced bevel degree
* Drastically reduced dross at thin plate by pulse cutting
* Forced air stream up to the end of electrode
|
|
Tecnoplasma 52
Selco%u2019s new low-cost plasma cutting generator using electro-mechanical technology, has an innovative, modern design.
It can perform good quality cuts up to 15 mm carbon steel.
As it does not consume much electrical power and compressed air, this tool is ideal for cutting conductive materials on-site and in the workshop.
It is more versatile, simpler, quicker and more practical to use than traditional mechanical tools and oxyacetylene welding torches.
The pilot arc is accurately struck thanks to the high frequency device, and is always present while the torch button is pressed, enabling you to cut grilles and work pieces of complex shapes. If used off its nominal parameter range, a thermal safety device protects internal parts against malfunctions.
Two alarms are also provided, one to cut off the output voltage when the torch is not completely assembled and the other to prevent operation with incorrect compressed air pressure.
|
|
| ... products without technical information |
| |
The newly developed side and face milling cutters with their sturdy, tangential and four-edged indexable inserts ensure a high machining volume (from 4 mm cutting width and above) for parting, slitting, slotting and trimming.
The new porcupine cutter family for shoulder milling and trimming is suitable for cost-effective machining of P, K, S and N materials.
Walter porcupine cutter F4038 / F4138 / F4238
High process reliability due to the firmly embedded front plates and large cutting areas
Extremely soft cutting action due to high positive cutting edge geometry
Milling without steps
|
|
SLOTTING TOOLS
Dathan also produces a range of slotting tools for use on gear shaping machines. These are usually used to produce forms that cannot be generated in the normal way. Combination tools can also be produced as the gold cutter below. This is a custom made generating and slotting tool designed to cut a splines in a part with large clearance areas and teeth with radial sides.
|
|
Features :
- Outstanding chip control through stagger tooth form and coolant thru holder.
- Vibration resistant carbide holder.
- Simple insert indexing through front mounted insert screw.
- T-Slot width per DIN 650 (a=10, 12, 14mm)
- Specials available upon request
|
|
| ... products without technical information |
| |
A lot of electrical , pneumatic, or battery powered models .
* Diameter of blades till 50mm to 120mm
* Light models to cut only one sheet or heavier one to cut a layer
* Also 3 phases 400v models (to set up into an automatic bigger machine)
|
|
Electric Hand Shear
Cuts all kinds of textiles with clean, smooth cut.
Technical Data
- Cutting height 10 mm (3/8")
- Power consumption 55 W
- Knife diameter 50 mm (2")
- Grip diameter 51 mm (2")
- Total length/height 230 mm (9")
- Weight ~ 790 g (1.7 lb.)
|
|
|
|
see the results for the following category : 
