Removal rating: 0.5 µm - 150 µm
... Wound filters feature a graded density construction, enabling progressively smaller particles to be captured through the depth of the filter media. The result is a high dirt holding capacity filter ...
Allied Filter Systems Ltd
Removal rating: 0.5 µm - 150 µm
... Cartridges will easily rinse-up to 18 Megohm-cm. Toxicity: Cartridges are appropriate for use in pharmaceutical applications. Components meet USP-XXIII, Class VI criteria. Purity: Proxis ...
Allied Filter Systems Ltd
Removal rating: 1 µm - 40 µm
Flow rate: 300 l/min - 800 l/min
... permitted pressure drop. Proxis HF melt blown cartridges are “coreless” filter elements, and mechanical strength is provided by an internal perforated tube located within the filter ...
Allied Filter Systems Ltd
Removal rating: 0.2 µm
KEMIFLON – KMF filter elements is the specially designed to be the Final sterilizing filter required for a sterilization for bulk applications, including solvents purification as Acetone, Hexane, Ethyl ...
BEA Technologies S.p.A.
Removal rating: 0.5 µm - 40 µm
Flow rate: 400 l/h - 3,000 l/h
POLIXSTER filter elements are incorporating components and parts fully made in polyester and assembled by thermowelding process; its high chemical compatibility gives the best performance in filtration of solvents, acids ...
BEA Technologies S.p.A.
MICRONYL filter element is designed and manufactured to satisfy and assure high quality and consistent performances in critical applications. MICRONYL cartridge includes Nylon 66 membrane at controlled ...
BEA Technologies S.p.A.
... length. Fuel-Gard® monitor cartridges meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors with Absorbent Type Elements. Each Model FG Fuel-Gard® ...
Facet International
Flow rate: 19 l/min - 27 l/min
... clay minimizes settling Interchangeable with other manufacturer´s bag and canister clay treater cartridges Hoisting handles expedite cartridges installation and change-out Flow direction: outside to in
Facet International
... Maximum water coalescence Balanced cartridge flow characteristics 5th Edition EI 1581, Category M Qualified FOR MAXIMUM WATER COALESCING EFFICIENCY AND SOLIDS HOLDING CAPACITY PECOFacet CM Model 5 coalescer cartridges ...
Facet International
... equip the instruments with filter elements designed to optimize as much as possible the available places and the air flows to be treated. The filter cartridges are designed with synthetic ...
... polyester filter cartridges are used for a large filtering surface to ensure a fluid flow rate suitable to minimize working pressure. IFS designs pleated filter elements ...
... Drug Administration (FDA) 21CFR 175, 176, 177, 178 and 182 EU Framework regulation 1935/2004/EC and relevant sections of Plastics Regulation (EU) 10/2011 3-A Sanitary Standard Kosher and Halal certification available ...
Suez Water Technology & Solutions
Removal rating: 0.2 µm - 150 µm
... PROTECT PG depth filtration cartridges consist of wrapped polypropylene filter material with layered media that allows for coarse to fine filtration in a variety of applications in the ...
Eaton Filtration
Removal rating: 2, 5, 10, 20, 35 µm
Flow rate: 0 l/min - 600 l/min
... bowl during servicing, resulting in a highly compact filter solution with very low bowl/element clearance Glass fiber media ensures maximum filter efficiency over an extended lifetime. Multiple filter ...
Parker Hydraulic and Industrial Filtration Divisio
Removal rating: 20 nm
Aquaflex modules are based on hydrophilic hollow-fiber ultrafiltration membranes, composed of a PES/PVP blend. The membranes, which are operated in a dead-end mode, have high mechanical and chemical strength, making them suitable for ...
Pentair X-Flow
– Filter surface area: 3200 cm² – Material: Polyester – Dust retention: 99.8 % Pleated filter cartridge for vacuuming household and industrial dust, sawdust, wood shavings, masonry, ...
Starmix
... humidity into the interior, leading to the risk of water condensation at cooling plates or cold surfaces. The Air Dryer Cartridge adsorbs the water vapor, thus preventing condensation which could lead to electric shorts. ...
MANN+HUMMEL Filters
Removal rating: 0.1 µm - 0.45 µm
PtSEP Series Pleated Filter Cartridge has the pleated filtration layer composed of PTFE membrane and distribution layer. Its filtration ratings ranges from 0.1μm to 0.45μm. PtSEP has excellent chemical ...
Shanghai LIVIC Filtration System Co., Ltd.
Removal rating: 0.5 µm - 100 µm
Depth filter with 4 filter layers made entirely of polypropylene with 20 % recycled content WFMB The WFMBR melt-blow cartridge with 20 % recycled content is manufactured ...
Wolftechnik Filtersysteme GmbH & Co. KG
Removal rating: 0.3 µm - 180 µm
... replacement for Pall Profile II* filters. SupaSpun II filter cartridges are produced using an improved manufacturing process resulting in the following features: ...
Amazon Filters Ltd
Removal rating: 1 µm - 50 µm
Made of 100% polypropylene thread for deep filtering. They have a large contact area providing high trapping capacity and highly efficient filtering with minimal load loss. Fluytec spun filter ...
Fluytec Filtration Technologies, S.A
... depots, primarily as pre-filters to lengthen the service life of downstream coalescer elements in filter/water separators. FAUDI Aviation microfilters are highly efficient and thus cost effective due ...
FAUDI Aviation
Removal rating: 0.5 µm - 100 µm
... releasing, which indeed delivers superior performance. In addition, each PAT cartridge has a polypropylene center core which enhances mechanical strength to the cartridge. This series ...
Filtrafine
Removal rating: 0.2 µm - 0.65 µm
Liquid process filters of ZTEC B series have special features with extended surface area, decrease in the bioburden and polyethersulfone membrane filter cartridges. The pipe makes it ...
Graver Technologies
Removal rating: 25 µm
... Material(s)Polyethylene Max temperatur80°C Gasket materialsPerbunan Gaskets ConnectionAluminium end caps PE filter element filter down to 25 µm is designed to have extremely low differential pressure ...
ultrafilter Skandinavien Aps
Removal rating: 1 µm - 100 µm
String Wound Filter Cartridge is a deep filter element, is used for a filtration in low viscosity, low impurity. String Wound Filter Cartridge is ...
RKS Environmental Science and Technology (Shanghai) Co.,Ltd
... final sterilizing filters Pore sizes range from 0.10 to 0.65 micron Validation BNM filters are validated using test procedures that comply with ASTM F 838-15(ae1) protocols for the determination ...
Critical Process Filtration
... fluids are used. Filter can be washed. HEPA Filter The HEPA filter is made of fibreglass material with a support layer of cellulose. Filtration efficiency is 99.995% EN 60335. Note: ...
Dustcontrol AB
Removal rating: 0.1 µm - 500 µm
... Nylon filters have high flow rate performance, good retention rate and excellent organic cleanliness. It is especially designed for photoresists, solvent and other chemicals in SEMI-Photo processes.The Nylon membrane ...
Membrane Solutions LLC
Removal rating: 0.1 µm - 1 µm
LPTL filter cartridges are characterized by hydrophilic PTFE membrane and polypropylene components for broad applications, widely used in Active Pharmaceutical Ingredients production ...
ANOW Microfiltration
FA string wounded filter cartridges are made of an polypropylene yarn with polypropylene core. They are made of extruded polypropylene. The polypropylene ...
Flow rate: 60 m³/h - 2,760 m³/h
... air you need, the sales and service of the filtering process according to the usage areas. The filtering system prevents the stopping of production and protects you from extra maintenance costs. Our ...
Please specify:
Help us improve:
remaining