|
|
PLA-L
GEHR PLA-L is a blend of polylactic (polylactic acid), some lignine, fatty acid
and wax. This biopolymer is new to our company and can be used in temperatures ranging from -30 C to +60 C.
General properties:
thermoplastic based on renewable raw materials, therefore it is ecologically
harmless and neutral in the CO2-result
PLA-L is biodegradable
waste disposal e.g. by composting respectively incineration
good mechanical properties similar to ABS
higher stiffness and a modulus of elasticity up to 2740 MPa
good impact strength also at low temperatures up to -30 C
high resistance to polar solvents
General applications:
furniture industry
toya industry
mechanical engineering
medical industry
food industry
textile industry
replacement of PET
|
|
Carrier profiles
Cover sections
Edge sealing and stairwell sections
Fender welts
Filler sections
Handrail profiles
Piping
Sealing sections
Spiral tubes
Step mouldings
Tent and tarpaulin welts
Trim mouldings
For customers in the bus and coach industry who are unwilling to spend large amounts on tooling for individual waist and post covers GHE has developed an ingenious and neat standard profile system which the customer trims and installs to meet his individual requirements.
Characteristics of the Standard Waist and Window Post Cover System
Suitable for different installation depths in varying types of vehicle
Uniform appearance
Simple assembly, no costly trimming work necessary as there is
no longer any need for notches in the window post areas
High-quality plastic profiles made of ABS are free of PVC
(with the exception of glass lip profile)
UV resistant in compliance with DIN 75 202
Fulfils the vehicle industry's "Passive Safety" standard
Available ex warehouse in two colours
|
|
* Rubber profiles: compact or cellular for industry and construction use, sold in stock or by order
* Security profiles
* Plastic profiles
|
|
Extruding profiles of h.hiendl GmbH & Co.KG
The h. hiendl GmbH & CO. Kg developed, produces and sells products of thermoplastic plastics and elastomers. These profiles as in the illustration are custom-made. Here the extruding and the injection moulding procedure are used. Preferential materials are classical polyolefins, PP, polystyrene derivatives, PVC and thermoplastic elastomers as well as natural fiber composite materials from the Hiendl NFC material system.
|
|
Profiles
GEHR extrudes thermoplastic materials profiles according to your individual needs. Due to our in house toll shop we can offer short deliveries at reasonable prices.
Materials
# PVC - U
# PVC - C
# PE - HD
# PP
# PS / SB
# ABS
|
|
| ... products without technical information |
| |
|
Reduction Engineering also provides custom designed equipment to complement our standard model pulverizers. These unique systems can be designed for applications requiring micronizing materials, special sifters, loading/unloading, conveying, ambient & cryogenic applications, varying horsepower needs, heat sensitive materials, abrasive product handling, and production volumes.
|
|
PVC, PE, PP and wood panel extrusion line
PE, PP and wood panel plate extrusion line has compact structure, good plastification, high output, long life and other advantages. This line uses SJZ92 conical twin-screw extruder with DC motor, imported electronic components and PT100 platinum resistance, which provide wide adjusting range and precise temperature control.
The down stream equipment includesvacuum calibration and cooling unit,hauloff unit, cutting machine and stacker.The calibration unit is equipped with large forced cooling system so that it can provide perfect calibration effect.
The haul-off unit uses two lines of caterpillar.The lower one is fixed and the upper one can be adjusted according to the plate size.
The cutting machine is equipped with PLC control system which helps to set length and provide accurate automatic cutting. The stacker is covered with rubber grip blocks to prevent products from damage
|
|
|
|
|
|
Plications:
PEAPVC special-shaped material extrusion production line go together with to extrude the machine with twin-screw plastic extruder,can process the PVC plastic doors and windows special-shaped material, aluminum reunite type material,special-shaped material electric cable many bores wears the line tube and decorate type materical etc.ncitons and Construction: Refer to the newest foreign advanced technology, the unit design is well optimized. It has advantages,such as even plasticizing, small cutting speed rate ,high outpur,long use-life and other. The unit is composed of cone double-screw-stem extruder, vacoum-sizing table, drawing machine, cutter,laminator,turn-up frame and others. The main machine adopts imported AC frequency converter driving. The temperature control meters adopt Japan RKC products. The ancillary machine vacuum pump and drawing motor adopt high-quality products. The maintenance is simple. After the screw stem cylinder and mould are exchanced.It can straight extrude imitating wood foamed special material. The wood-plastic mixing extruding production line adopts special-designed screw stem, material cylinder,moulds and processing technology.
|
|
PVC Elbowboard Production Line, production technology, mixing materialextruding by
twin-screwmouldvacuum formingcoolingcorrectiontractioncuttingdischarging coating film
This production line features in strong stability, high yield, long lifetime. Adopt import fittings in main electrical components.
Width of product manufactured by this kind equipment: 500-1000mm, Thickness: 20-40mm, smooth surface. It looks beautiful
after coating film, is an ideal material for fitment.
|
|
|
|
|
|
plastic and wood foamed profile and plate extrusion line
This machine uses the special designed screw and barrel, die and extrusion process to produce plastic and wood products. The series of products are: One step thick plastic and wood decoration plate extrusion machine, plastic and wood palletizing machine and different kinds of plastic and wood dies.
This machine can use the one step extrusion method and also it can use the two-step extrusion method after palletizing. The two-step extrusion method can save the power and space, and the two-step extrusion method features the machine can the humidity from the wood powder. So that the feeding section of the extruder can be filled with enough material and the plastification effect will be better. Special and well designed screw enables the raw material to be evenly stay in the extruder. The screws and the barrel are bi-metallic treated, more wearable and anti-corrosion.
The machine can produce PE, PP or PVC and wood profile products. These products mainly applied for making pallets, packing cases, floors, wall decoration materials and other wide applications. The wood powder or plant fiber can be put up to max. 50-75%. This machine can produce the PP, PE PVC, ABS, PS and etc.
|
|
| ... products without technical information |
| |
... see all the products in the category
Extruders
|
|
|
