- Hydraulics - Pneumatics >
- Pump >
- Plastic pump
Plastic pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 50 m³/h
Head: 40 m
Fluid temperature: 90 °C
Chemical pump - B80 HME The B80 HME series is a design with bearingless cantilever construction that is directly coupled to the IEC Motor. Specially designed for plant engineering and confined installation conditions. ...
Lutz Pumpen GmbH
Flow: 0 m³/h - 50 m³/h
Head: 0 m - 40 m
Fluid temperature: 90 °C
Chemical pump - B80 KME The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings ...
Lutz Pumpen GmbH
Flow: 0 m³/h - 270 m³/h
Head: 0 m - 85 m
Fluid temperature: 90 °C
Acid pump - B80 KGK G3 The B80 KGK G3 series is a powerful and robust submersible centrifugal pump with plain bearings, drive lantern mounted on anti-friction bearings and IEC standard motor. The B80 ...
Lutz Pumpen GmbH
Flow: 0.1, 0.2, 0.5 l/min
Pressure: 30 bar
MKx gear pump units include a pressure-regulating valve and pressure-relief valve. Electrical pressure monitoring is performed by an integrated pressure switch, and fill-level monitoring also is possible. These units ...
Flow: 20 l/min
Pressure: 3 bar - 8.6 bar
Head: 4.5 m - 9.5 m
The FLUX air-operated diaphragm pump FDM 07 in injection-moulded version is self-priming and protected against dry running. The pump is distinguished for its versatility and can be used for pumping low ...
Flow: 178 l/min
Pressure: 8 bar
Head: 6 m
The FLUX air-operated diaphragm pump FDM 25 in injection-moulded version is self-priming and protected against dry running. The pump is distinguished for its versatility and can be used for pumping low ...
Flow: 0 l/min - 20 l/min
Pressure: 0 bar - 8.6 bar
Part of our Compact Series of pumps, our 1/4” pumps feature big performance in a compact package. They feature flow rates up to 5.3 GPM (20 LPM), a wide range of material ...
ARO, Ingersoll Rand
Flow: 0 l/min - 40.1 l/min
Pressure: 0 bar - 6.9 bar
3/8” non-metallic diaphragm pump The ARO nonmetallic 3/8” PD03P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...
ARO, Ingersoll Rand
Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar
... ”1/2 non-metallic diaphragm pump The ARO nonmetallic 1”1/2 PD15P-XXS-XXX air operated diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...
ARO, Ingersoll Rand
Flow: 0 m³/h - 10 m³/h
Head: 0 m - 92 m
Power: 0 kW - 2.2 kW
JET SELF-PRIMING PUMPS “JET” self-priming electric pumps, with incorporated ejector and in version with external ejector. Ideal for use in heating/cooling systems, water supply, irrigation and the distribution ...
SAER
Flow: 14 m³/h
Head: 64 m
Power: 2.2 kW
MULTI-STAGE CENTRIFUGAL PUMPS Multi-stage centrifugal electric pumps. Reliable and tough thanks to their solid pump body, this series is used in domestic systems, water supply, irrigation ...
SAER
Flow: 0 m³/h - 8 m³/h
Head: 0 m - 59 m
Power: 0 kW - 2.2 kW
Suitable for domestic systems, water supply, small gardening applications and increasing pressure in mains water supply systems. They guarantee minimum hydraulic losses, and the Italian design and production process guarantees ...
SAER
Flow: 130 l/min
Pressure: 8 bar
Fluid temperature: 65 °C
Diaphragm pump in polypropylene and AISI 316 stainless steel series PPIB-1, membranes in Teflon® and Hytrel®, balls in Teflon® and seats in AISI 316 stainless steel FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE ...
Flow: 0 m³/h - 7 m³/h
Pressure: 8 bar
Head: 0 m - 52 m
Simple: Plug & Pump system Efficient: Highly efficient hydraulics, low electricity consumption and very compact thanks to motor optimisation Automatically operating system and dry-running ...
Flow: 0.05 m³/h - 1.5 m³/h
Pressure: 20, 15, 10, 6, 5 bar
... C.Pro dosing pump is a fully synthetic pump for precise dosing as well as gentle and low-pulsation conveying of a wide variety of chemicals in the fields of environmental technology and the chemical industry. The ...
Flow: 0.5 m³/h - 300 m³/h
Pressure: 3 bar - 8 bar
... ® T.Proc® rotary lobe pump is available in both all-metal and metal-elastomer versions. Thanks to the innovative FSIP® (Full Service in Place) design, it is particularly easy to maintain. With the self-priming rotary ...
Flow: 50 m³/h
Pressure: 1.4 bar
Head: 11 m
Manufactured in chemical resistant thermoplastics – entirely non-metallic Pump head can be connected in series for high head applications Can pump two dissimilar fluids simultaneously Magnetic couplings ...
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Aalborg Instruments
Pressure: 0 bar - 0.848 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Weight: 3.4, 1.5 kg
The PIUSI Suzzarablue Hand Pump for transferring AdBlue® is the basic version of the PIUSI Hand Pump model, piston and drum alternatives, from the Hand Pumps line. The ...
Pressure: 0 MPa - 0.6 MPa
Head: 2 m - 4 m
Input diameter: 0.3 in
... 5J05,5J07,5J10.5J13) Its main function is to achieve accurate quantitative filling of liquid. The metering pump bracket and its transmission structure are compact and have high suction and discharge ...
Flow: 0.36 l/h - 15 l/h
Pressure: 0 bar - 16 bar
Power: 8 W - 25 W
... design; the graphical display with a multi-language menu as well as the dosing pump's operation using the integrated keyboard simplifies its use. Dosing head ventilation (plastic version) Suitable for ...
Lutz-Jesco GmbH
Flow: 0.5 l/h - 15 l/h
Pressure: 3 bar - 16 bar
Power: 10 W - 29 W
... number of strokes. In addition, all error messages can be transmitted in the opposite direction. Dosing head ventilation (plastic version) Suitable for wall and floor mounting Material finishes PVC, PP, PVDF and ...
Lutz-Jesco GmbH
Flow: 2.4 l/h - 30.7 l/h
Pressure: 3 bar - 20 bar
Power: 25 W
Precision that inspires The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision ...
Lutz-Jesco GmbH
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 14 l/h - 140 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW
... - TUBE PUMP / ALBIN PUMP Specifications: Flow rate: up to 140 l/h (97 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, NBR, ...
Albin Pump
Flow: 34 l/h - 348 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW
... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 348 l/h (92 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, ...
Albin Pump
Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm
... fluids The MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x 365 mm). Although this mini pump ...
Flow: 145 l/min - 199 l/min
Pressure: 20, 10, 15, 5 bar
Power: 0.8 kW - 5.4 kW
4 diaphragms in NBR and Desmopan® (Viton available on request). Parts in contact with spray liquid: plastic coated aluminium and poliamide. Standard: pressure accumulator. On request: safety valve and PTO protection.
COMET Spa
Flow: 0.35 m³/h
Power: 10 W
Fluid temperature: 80 °C
... filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 0.38 m³/h
Power: 10 W
Fluid temperature: 80 °C
... filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C
... bases. Long-lasting design Our extremely strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump ...
Siebec
Flow: 4.8 m³/h - 31.2 m³/h
Head: 2.7 m - 23.8 m
Power: 0.33 kW - 2.2 kW
Horizontal self-priming centrifugal swimming pool pump with built-in prefilter. Perfect for ensuring water circulation in swimming pool filtration systems. Horizontal self-priming centrifugal swimming pool pump ...
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1.5 bar - 7 bar
Head: 5 m - 8 m
PIVOT Series 1” Air-operated double diaphragm (AODD) pumps are available in multiple metallic and non-metallic materials such as Aluminum, Stainless Steel, Polypropylene, Conductive Polypropylene and ...
SAMOA Industrial, S.A.
Flow: 38 l/min
Pressure: 1.5 bar - 8 bar
Weight: 1.9 kg
Very compact and reliable polypropylene diaphragm pumps for medium to small volume transfer , dosing, spraying and dispensing a variety of fluids. Typical applications ...
SAMOA Industrial, S.A.
Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm
... non-stalling, lube-free air valve system in Versamatic’s ¼" (6mm) plastic air-operated double-diaphragm (AODD) pump. Engineered with original equipment manufacturers (OEMs) in mind, this AODD pump ...
WARREN RUPP
Flow: 0 l/min - 100 l/min
Head: 0 m - 42 m
Power: 0.05 kW - 0.37 kW
Immersion Pumps in Plastics series KTF are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is required, ...
Flow: 0 l/min - 390 l/min
Head: 0 m - 42 m
Power: 0.63 kW - 2.94 kW
Immersion Pumps in Plastics series KTF and KTB are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is ...
Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m
... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.26 l/min
Head: 2 m
Power: 8 W
... 76.1mm Gear reducer Accurate flow Not easy to slip High stability Snap-in structure The liquid only touches the pump tube. DC Powerful Motor Red side is "+" Only supports intermittent work 2 Kinds ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.2 m³/h - 0.26 m³/h
Fluid temperature: 0 °C - 40 °C
Input diameter: 3.2, 4 mm
★ Compact structure ★ Suitable for viscous, non-viscous liquid transfer ★ Exquisite high-end appearance, color can be customized ★ Plastic gear drive, cost-effective xBasic Parameters Motor: ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW
... heavy-duty plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable ...
ASV Stuebbe GmbH & Co. KG
Flow: 235 m³/h
Head: 68 m
Power: 30 kW
STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient ...
ASV Stuebbe GmbH & Co. KG
Flow: 130 m³/h
Head: 42 m
Power: 11 kW
Horizontal single-stage spiral cased pump Shaft sealing through single or double acting mechanical seal Circulation, rinsing, quench or barrier medium depending on application Made of sturdy plastic ...
ASV Stuebbe GmbH & Co. KG
... System Get More http://www.topsflo.com/special-pumps/water-circulating-pump.html
Flow: 0 m³/h - 90 m³/h
Pressure: 0 bar - 8 bar
Head: 10'00" ft - 150'00"
... Available in pure PP or E-CTFE+carbon Magnetic version for clean liquids The integral version (instead of the common plastic flanges) and the armored version (instead of the cast-iron) both allow ...
Flow: 2 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 40 m
EQUIPRO series is made of plastic technopolymers, close-coupled with an inlet pipe at the bottom and outlet pipe at the top. These pumping solutions ensure a longer life cycle and less maintenance operations. Compact ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining