|
|
|
Autoquip Vertical Ram Lifts are utilized when a scissors lift is not a option, either due to high axle load requirements, high travel requirements, high load requirements - or some combination of all three. Vertical hydraulic ram lifts are designed to handle the most awkward and heaviest loads and can reach heights where scissors lifts become unstable. Vertical Ram Lifts offer inherent simplicity with the typical configuration having one or two hydraulic rams supporting a rigid platform. Completely customizable, these hydraulic ram lifts have very few moving parts and offer the greatest flexibility as to platform size, travel and capacity. The Vertical Ram Lifts require a pit and usually become permanent installations. Autoquip Hydraulic Ram Lifts are ideal for concentrated, rolling loads of all kinds, and can be used as a loading dock or for in-plant applications.
|
|
|
|
|
|
CAR-LIFT
Car-lift is used for the vertical and horizontal transfer of cars - without driver - between several levels of storage or exhibition in a car agency. The driver is only allowed to drive the car on and out the platform.
Car-lift must be equipped with securities in conformity with law or must be embedded in built concrete shafts or metallic cage with plain walls and doors equipped with electro-mechanical interlocks.
Main characteristics of the car-lift shown on the photo :
Lifting capacity : 2000 daN
Platform dimensions : 5,000 m x 2,500 m equipped with safety handrails
Collapsed height : 0,700 m
Vertical stroke : 3,000 m
Particularity of this configuration : The car-lift includes an automatic safety locking device in its high position. It maintains the position of the platform and secure the transfer of cars.(......)
Main options : galvanization, all optional safety equipment, transport facilities, set up and commissioning, maintenance contract....
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Vertical transfer of any kind of vehicles : industrial, for roads, army,... inside or outside buildings, parking, museum, exhibition room....
|
|
FIXED LIFTING PLATFORM WITH TANDEM SCISSORS
Lifting platform with tandem scissors, equipped with handrails and reinforced PVC skirts, for the leveling of operators in the aeronautic industry.
Main characteristics of the fixed platform shown on the photo :
Lifting capacity : 400 daN
Platform dimensions : 4,000 m x 1,500 m
Collapsed height : 0,210 m
Vertical stroke : 0,790 m
Main options : particular covering (wood floor, carpet,...) input socket, compressed air circuit with rapid connections, light, galvanization...
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Ergonomic leveling of operators on production lines to ease the assembling of parts or of equipment....in all kind of activities and manufacturing.
This particular design, as two standard lifting tables linked together with tandem scissors, allow the lifting of heavy and bulky loads - while being at a low collapsed position.
|
|
|
|
|
|
SPECIAL LIFTING TABLE
The special lifting table is set on a vertical electric horn and lift operators in order they can supervise the thermal treatment of parts.
Apart from that operation, the special lifting table is stocked in another place.
Main characteristics of the special platform shown on the photo :
Lifting capacity : 500 daN by 3 operators without any equipment or tool
Platform dimensions :
Outside diameter : 5,400 m
Inside diameter completely free : 3,400 m
Platform with drop steel plate
Basic frame adapted to the round platform / platform for operators
Six feet and 3 supports adapted to the existing supporting areas of the horn
Collapsed height : 1,280 m including 0,680 m for feet
Vertical stroke : 1,750 m
Lifting system by three double superposed and synchronized scissors at 120°C
Main options : galvanization, internal compressed air circuit or breath air or paint or water circuit, ATEX equipment, radio-controls, any adaptation : mechanic, hydraulic, electric and surface treatment.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Industrial forge, mechanical engineering, cars and all kind of industries mass-producing items. Stacking and un-stacking items to fill in or to empty containers...
|
|
Service platforms
AMV Service Platforms are supplied in many configurations. The most popular version is the AMV 10,5. This unit is built on a lorry chassis, it has a maximum working height of the platform floor of 10,5 m. and a lifting capacity of 1500 kg. over the whole working range. It is equipped with four hydraulic support legs. The standard version has a p.t.o. driven hydraulic pump. An electric powerpack can be supplied as an option. Other options are diesel driven compressors and generators for tool operation. All operations are radio operated.
|
|
|
|
|
|
Utilift scissors lifts on our famous mining carrier are designed for lifting and installations in mining and low-profile tunnelling. Utilifts are suitable for roof reinforcement work, charging explosives, hanging cables and installing pipes, ventilation equipment, etc. Typical standard options include a side-shift platform, platform tilt, crane, pipe changing equipment, air compressors, an electric-driven power pack for platform hydraulics, ANFO charging kits and helper platforms. The vehicle’s driving ergonomics can be enhanced with an optional, fully enclosed, high-comfort operator’s cab.
Himecs are the product of long-term collaboration between Normet engineers and global tunnelling customers and experts. This has generated a holistic understanding of customers’ lifting and access equipment needs in both hard and soft rock environments. The wide range of Himecs is ideal for medium to heavy-duty load lifting and work coverage in practically any tunnel profile. With a large variety of platform configurations and standard options, they can be perfectly customized for specific lifting applications. Our new platform load sensing system and other built-in man-lifting safety features comply with the latest safety rules and regulations. Himecs are also CE-approved and feature the famous Normet mining carrier.
|
|
LIFTING TABLE FOR AIRCRAFT REFUELING VEHICLES
For the leveling of operators and equipment. The lifting table is embarked on an aircraft refueling vehicle.
Main characteristics of the lifting table shown on the photo :
Lifting capacity : 450 daN
Platform dimensions : 2,100 m x 1,350 m
Collapsed height : 0,410 m
Vertical stroke : 2,700 m
PARTICULARITIES : floor, handrails, hydraulic power unit, electric equipment and other specific components shown on the photo are supplied by the aircraft refueling vehicle manufacturer.
Main options : metallization with or without final coating, hot deep galvanization without final coating.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Equipment for vehicles, trailers or others. Also vehicles on runway as for refueling, maintenance, control,... for civil and military planes.
|
|
Haulotte, N° 1 in Europe and one of the worldwide leading manufacturers
The HAULOTTE articulating booms offer :
- from 12 to 41 m working height
- an important outreach (up to 21m)
- a maximum platform capacity (up to 250 kg)
|
|
The HAULOTTE diesel scissor lifts offer :
- from 8 to 18 m working heights
- an important working area (platform size up to 6 m x 1.80m)
- a maximum platform capacity (up to 900 kg)
- a remarkable driveability (4 x 4)
|
|
The HAULOTTE electric and Rough Terrain Electric scissor lifts offer :
- from 6 to 12 m working height
- an important working area (platform size up to 3.70m x 1.50m)
- a high autonomy (powerful batteries)
This all-purpose models are very adapted for congested areas.
|
|
Haulotte, N° 1 in Europe and one of the worldwide leading manufacturers
The HAULOTTE telescopic booms offer :
- from 14 to 43 m working height
- a maximum platform capacity (up to 360 kg)
- an important outreach (up to 20m)
|
|
The New Telescopic Platform H28 TJ+ (HB86 TJ )
Haulotte Group, the global manufacturer specializing in equipment that lifts people and material lifting equipment, has used its expertise to respond to customer needs with the launch of the innovative Telescopic Big Boom H28 TJ (HB86 TJ )
Innovation
Additional %u2018flexibility%u2019
The new Big Boom H28 TJ (HB86 TJ ) has a telescopic jib which offers a 5 m additional reach (16 ft 5 in) to work in the most challenging working environments
%uF0D8A significant increase in productivity
In every respect, the new big boom H28 TJ (HB86TJ ) makes your work easier and allows you to operate in a wider range of working environments
With an outreach of 23 m (75 ft 6 in)
With simultaneous movements
With an 2.44 m platform (8 ft)
With the capacity to lift rapidly heavy loads (Up to 350 kg %u2013 772 lb).
With a 5 m (16 ft 5 in) telescopic jib with proportional controls that allows to reach the most inaccessible worksites.
|
|
The HAULOTTE vertical masts offer :
- from 6 to 12 m working height
- maximum compactness and handiness
- a high autonomy (powerful batteries)
|
|
|
Articulating Boom Lifts with their up-and-over configuration, are the most versatile boom lifts in the JLG product range. Ideal for reaching up and over machinery, equipment, and other obstacles mounted on floors, or for reaching other elevated positions not easily approached by a straight boom lift. The machine’s turntable may be rotated 360 degrees; the upper boom can be raised or lowered from almost vertical to below horizontal, and extended (telescoped) while the work platform remains level. All articulating models are driveable at full elevation, subject to satisfactory ground conditions, and some models have narrow chassis widths to help provide access to confined work areas. JLG offers 11 diesel powered articulating boom lift models, ranging from 15.5 m to 47.5 m working height.
|
|
RUNABOUT
The Genie® Runabout is a compact, low-weight machine that is wel suited for increasing productivity on the job. The efficient operation and convenient setup of the of the Runabout™ make it ideal for warehousing, stock-picking, transporting, inventory management, general maintenance and construction.
A zero inside turning radius and full elevation drive feature deliver maximum productivity.
Working height from 5.48m to 8.07m
Lift capacity from 159kg to 227kg
|
|
|
JLG’s range of scissor lifts is designed for applications where more workspace and lifting capacity are required rather than outreach. The scissor lift provides a large platform work area and allows for heavier loads – for example large sheets of wall cladding. While deck size, load capacity and lifting heights are of prime importance, other factors such as power source, ground conditions and manoeuvring requirements also have to be considered. Four wheel drive is standard on all JLG diesel scissor lifts, providing impressive gradeability to travel on steep grades.
|
|
|
JLG’s range of telescopic (straight) boom lifts are especially useful for applications that require high reach capability. JLG’s Boom Lifts are designed and manufactured with strong and rigid booms to provide improved operator comfort. For greater manoeuvrability, gradeability and mobility, JLG’s boom lifts offer options that include four wheel drive, oscillating axle and four wheel steer. The platform control layout is common across the range, making it easier for trained operators to move from one model to another with the need for extensive re-training. Fully proportional drive and lift for a smoother ride and JLG’s control ADE (Advanced Design Electronic) System that provides improved fuel economy with diagnostic capability to help reduce time spent on service and maintenance are just some of the many features.
|
|
ELECTRIC SCISSOR LIFT
Genie® electric scissor lifts are exceptionally mobile, letting you manoeuvre in tight worksites. Plus, they are productive and efficient, allowing maximum workspace for larger loads and more workers. All models have front-wheel drive and most models feature zero inside turning radius for excellent manoeuvrability in tight spaces like congested costruction sites, lifts and narrow aisles.
Low-emission electric scissors deliver a quiet, convenient method for operation in sound-sensitive environments like office buildings, shopping malls, hotels, schools and more.
On-board diagnostics help operators troubleshoot on the fly and make adjustments in the field to maximize uptime. Swing-out battery box and power module trays allow easy access to engine components for convenient service.
Working height from 6.57m to 11.75m
Lift capacity from 227kg to 567kg
|
|
|
JLG’s range of electric scissor lifts cover a multitude of applications – both inside and out. JLG offer three ranges of electric scissor lifts – ES series, LE series and LiftLux™ Electric Series – providing a versatile choice to suit all types of applications. Scissor lifts are used where less outreach but more workspace and lifting capacity are required. They are designed to provide larger platform work areas to walk on and generally allow for heavier loads than boom lifts. Scissor lifts may be manouevred in a manner similar to boom lifts but the platform may be raised only vertically, except for a deck extension that provides some horizontal outreach and additional working area.
|
|
Throughout the world you will see JLG electric boom lifts used in warehouses, factories and shopping malls, as well as in outdoor locations. They are designed and engineered for reaching up and over machinery, equipment and other obstacles mounted on floors and for reaching other elevated positions.
All models can be driven up to full elevation. Narrow chassis models enable easy access to narrow aisles and congested work areas. With automatic traction control (ATC), they perform smoothly over uneven surfaces or obstacles and non-marking tyres that are standard on narrow models are perfect for indoor use. On the E600 series, an optional oscillating axle and all-wheel drive improves ground contact and terrain performance.
|
|
ROUGH TERRAIN Z-BOOM
Genie® engine-powered articulating Z™-booms provide lifting versatility with a combination of up, out and over positioning capabilities and outreach that's second to none. They also offer high ground clearance, two- or four-wheel drive options and rough terrain features for easy travel over irregular ground. Ideal for outdoor construction and industrial applications, these units have working heights between 12.52m and 43.15m and reach out maximum of 6.78m to 21.26m.
The Z™-boom design provides lifting versatility with "up and over" positioning and excellent outreach. A tight turning radius and zero tailswing allow unmatched manoeuvrability in confined work areas.
Lift capacity 227kg.
|
|
|
|
|
|
Up to 4 simultaneous and proportional movements, the HA120 PX boom reaches the maximum height within 30 seconds.
With a wide basket of 1.50m (4ft 11in) as standard equipment, offering a maximum capacity of 230 kg, and fitted with a Load Managing System, the articulated boom HA 120 PX also offers an ergonomic and user friendly control panel, already very popular on the HA16PX.
The HA 120 PX is fitted with simultaneous 4 wheel drive and steer as standard, a 26cm (11in) ground clearance and a hydraulic differential lock system give exceptional all-terrain performance with a gradeability up to 45%. This allows easy access in difficult working areas and rough terrain conditions.
Its narrow turning radius (3.85m – 12ft 8in), combined with the zero tailswing give to the HA 120PX superb manoeuverability whatever the working environment. Dual parallelogram riser allows ascent and descent along a vertical plane without retraction or extension of the boom, which offers comfort and maximum productivity.
Due to the horizontal outreach of 6.60m ((21ft 8in) and its up and over clearance of 5.70m (18ft 8in), the HA 120PX can easily by-pass the obstacles, and cover a big working envelope.
The narrow turning radius, the vertical jib rotation (140 °) and the platform rotation in 180 ° facilitate use of the machine in any the working environment.
Tilt controller (up to 5°), automatic platform levelling, mechanical turret slewing hook, resistance in winds up to 45km/h (28mph) and towing hooks and lifting eyes are additional features to benefit the user.
|
|
Max working height approx. : 16,85 m
Max platform height approx. : 14,85 m
Max working outreach approx : 7,50 m / 7,85 m
Turret rotation : 360°
Basket rotation : 60° + 60°
Max cage dimensions : 1,40x0,70x1,10 m
Safe working load on cage : 200 kg
Engine : Honda iGX 440 - 9,5 kW / 3050 rpm
Electric motor : 2,2 kW / 230V / 50 Hz / 1500 rpm
Max translation speed : 1,4 km/h
Max surmountable slope : 20° / 36%
Overall weight : 2000 kg
|
|
|
JLG’s vertical personnel lifts are the smallest aerial work platforms in the entire range. Provided to meet the needs of applications where space is limited and the floor load is restricted. The lifts are designed to have a minimum footprint area and can be set up quickly so there is little delay for you to start on the task ahead. The personnel lifts consist of a work platform attached to an aluminum mast that extends vertically. Platforms vary in size and capacity but all carry one person (some models carry two) with optional attachments to carry tools and materials with ease. There are three types of vertical personnel lifts available: push around vertical lifts, self-propelled vertical lifts, and self-propelled stock picker vertical lifts.
|
|
TELESCOPIC BOOM
Telescopic booms offer greater horizontal outreach than any other type of aerial platform - perfect for areas with limited access in construction and industrial applications. Genie® telescopic S™-booms are also designed for productivity with the traction and drive speed you need to get around the job site and to the work area. These models reach out horizontally between 9.65m and 24.38m, with working heights of 14.20m to 40.15m.
The 360 degree continuous rotation turnable rotates full circle for quick and flexible positioning. Minimal tailswing allows you to manoeuvre in tight work spaces.
Dual-fuel options are available for reliable, on-demand performance with the flexibility for indoor/outdoor applications.
Lift capacity from 227kg to 567kg.
|
|
|
Steady and reliable platform Proportional controls Easy towing speed rate A unique design of the stabilizer’s system allowing its use on rough grounds
|
|
|
|
|
|
The new aerial platform ORCHIDEA LIFT 21.11 is in the forefront of aerial platforms with innovative and advantageous solutions created by Hinowa over many years of construction of aerial platforms in particular of LL23.12.
1) Hydraulic variable stabilization.
2) Automatic stabilization on inclinations up to 5°.
3) GO HOME Function
3) “In shape” rotation with anti-collision control between the structure, the chassis, the cabin and the outriggers.
4) JIB arm
5) Basket rotation.
6) Interactive display that provides the operator useful information during operation in order to avoid machine stops due to user errors.
7) Visibility of the machine on the web R.A.H.M. that through a satellite system allows the location of the machine worldwide and to verify the state and regularity of use.
8) Lubrication-free pins.
9) Acceleration and deceleration control on all the movements that makes the plaftorm extremely manageable.
10) Double pantograph lifting system which assures a vertical movement of the basket up to 11 metres working height.
11) Electric engine 220 volt.
12 Top class performances: 21 m. working height with 11 m. outreach
200 fixed capacity.
|
|
Max working height approx. : 13,00 m
Max platform height approx. : 11,00 m
Max working outreach approx :6,50 m
Turret rotation :360°
Max cage dimensions :0,85x0,70x1,10 m
Safe working load on cage :120 kg
Vehicle : Nissan 35.11/35.13 (2900 mm)
Stabilizers : without outriggers
|
|
Max working height approx : 14,70 m
Max platform height approx :12,70 m
Max working outreach approx (with 200 kg on cage) : 6,20 m
Max working outreach approx (with 80 kg on cage) : 7,70 m
Turret rotation : 360°
Boom telescopic amplitude : 5,75 m
Max cage dimensions :1,20x0,70x1,10 m
Safe working load on cage :200 kg
Stabilizers : 4 straight line stabilizers
|
|
Max working height approx. : 20,00 m
Max platform height approx. : 18,00 m
Max working outreach approx : 9,65 m
Turret rotation :360°
Boom telescopic amplitude : 3,88 + 4,44 m
Max cage dimensions : 1,40x0,70x1,10 m
Safe working load on cage : 200 kg
Stabilizers :Straight line front stabilizers and pantograph rear stabilizers (Nissan - Renault Maxity)
4 pantograph stabilizers (Iveco)
|
|
|
|
