|
|
Custom-made elevators of DICTATOR after machine and elevator guideline
The DICTATOR Homelift DHM300 is a hydraulic elevator after machine guideline. It makes a barrier-free life possible - also in private houses and with very much cramped space conditions. The DICTATOR Homelift DHM300 will for each case of application custom-made and can thereby the existing place up to the last millimeter use. It needs only 80 - 200 mm below the lowest stop, starting from floor upper edge in the highest stop 2500 mm. The characteristics of a Homelift:
- slow Geschwindigkei: 0,15 m/sec.
- Dead man operation, i.e. the touch probe of the desired floor must be pressed until the elevator reached the floor
- in private houses no obligation to accept delivery by the TÜV
- Economical solution
The elevator DHE is the "large brother" of the DHM300. The DHE fulfills the requirements of the EN 81-2. Just like the DHM300 it is related to customers manufactured and co-ordinated with the respective installation situation. Also here the optimal utilization of the existing place has highest priority. The DHE drives with a substantially higher speed (0,62m/sec) in the burst mode. As Schachtgrube 200 mm are needed, as Schachtkopf 2700 mm. The DHE is particularly meant for the Nachrüstung in buildings, where an elevator with the usual requirements at Schachtgrube and Schachtkopf is not possible.
Both elevators are design-examined.
They are supplemented by the modular, steel pit system which can be arranged individually. All elements are not screwable, it welding necessary. Thus a problem-free binding is possible in and at the building. |
|
| These are "Hold-to-run" controls with Braille indicator for the blind. While in motion, the controls are interlocked for a pre-set time, with precedence given to the cabin's controls, so that there is no interference over movement should more people summon the cabin to the floor at the same time. The push-button panel on board has an alarm button connected with an acoustic alarm and an emergency button which activates the anti-power-cut device which in turn allows descent to the closest lower floor in the event of an interruption of the electricity supply. |
|
The PODIUM UNIT FOR CAGE Of ELEVATOR includes/understands:
A cast solid framework
Extensible cross-pieces
Slides of back extension
Folding and adjustable mountings in height
Two extensible beams of safety in length retained by chains
A railing partly low
A plywood ép flooring. 30 mm
In option:
Trap door of access, Scale of nonfolding access, Flooring on the beams
Dimensional specifications:
Width of 1.60 m to 2.60 m (adjustable with the step of 5 cm)
Depth of 1.60 to 2.40 m (adjustable with the step of 1 cm)
Height from 2.50 to 3.70 m (adjustable with the step of 10 cm)
Working loads:
Overload circulation: 180 daN/m ²
Height of maximum form: 3.80 m (150 daN/m ²) |
|
| This is the ideal solution for climbing two or three steps with a device which does not have a visual impact on the surrounding environment when idle or when it is necessary to avoid obstructing transit areas. This platform is characterised by a special flap alongside its perimeter which lowers on the landing side of the upper floor once the platform has traversed in order to reach the last rise and disappears completely when the platform is closed at the lower floor. |
|
This series with the largest actuator and lowest behind-panel depth within the APEM switch range perfectly complements the APEM product portfolio. The LPI has been developed on a modular base to fit the exact needs of technicians and end-users: more than 300,000 combinations are possible in this way!
For technicians, this pushbutton is available in 2 output versions, for front or rear mounting: a 5A combined separated NO/NC version and a 0.5A NO version. The low behind-panel depth allows installation in environments where space is critical.
For end-users, many different actuator types are available: with raised crimped, screen printed or raised moulded symbol. The large actuator surface allows a visible marking and a big symbol height. Dot or ring LED illumination is also available.
Because of its large actuator, this series is ideal for all applications where the pushbutton needs to be located quickly. Complying with the requirements of the EN81-70 standard (from Disability Discrimination Act), it allows disabled persons to access lifts and buildings more easily.
Features:
• Large ergonomic actuator (dia. 35 mm)
• Tactile feedback
• Low behind-panel depth (21mm max.)
• Stylish design
• Long Life (5,000,000 cycles for 0,5A version)
Applications:
• Where the pushbutton needs to be located quickly (access control, call information, museum, exhibitions…)
• Everywhere space is critical
• Where the end-user uses gloves |
|
Vandalism-proof actuators
These attractive actuators are made of a zinc-die casting (square)
or aluminium (round). They are IP65. A small, thick plastic lens in the
middle of the push-cap can be illuminated. |
|
| ... products without technical information |
| |
Pit bottom switches with knob or interlocked lever, recall drive units with socket outlets,
inspection boxes from 4 up to 8 functions.
Fully compliant with EN81..EN60068-2-6 - Resistance to vibrations - EN60068-2-27
Resistance to shocks. All components of the GM series are designed to the relevant
standards, hence ensuring the correct creepage and clearance distances
after possible vibrations and shocks. |
|
| ... products without technical information |
| |
| Double worm gearboxes can be with high ratio, so that we can get low speed through these connectings, different connectings are avaiable,such as NMRV030+NMRV040,NMRV030+NMRV050,NMRV063+NMRV130 and so on. Should you find them interesting, please don't hesitate to contact us. we are willing to serve you at any time. |
|
| ... products without technical information |
| |
|
|