|
|
VITAP - Vibration Isolated Table Top Platforms.
These lightweight platforms consist of a robust, powder coated metal enclosure with either three or four integrated low natural frequency BILZ rubber air springs FAEBI or the even lower natural frequency BILZ membrane air springs BiAir. Platforms are available with or without a levelling system; automatic or manual levelling systems are available. Standard platforms are supplied with a granite top which provides a polished surface with high mass and stiffness. These platforms are designed for a wide range of applications with loads from 1kg to 150kg. These include visual devices, light microscopes, microscopes with CCD camera, inspection microscopes, small surface and roundness testers, lab and measurement rooms as well as semiclean rooms. They are also well suited for portable use.
|
|
Suspended platform for wind turbine
The FIXATOR® suspended platform designed for the maintenance and exterior cleaning of wind turbines provides safe access to the blades and towers of the wind turbine.
Its aluminium design makes it light. This platform made up of modular components is quick to set up and not very bulky.
|
|
Floor and sub-floor platforms are modular solutions to the problem
of supporting vibration-sensitive, large, floor-mounted equipment
or semiconductor equipment in a raised-floor, cleanroom environment.
|
|
Ensure the protection of your personnel and to perennialize your equipment.
Applications: Range of protection and accessories perfectly adapted to the Platforms.
+ PRODUCED: Reliability: material designed in accordance with the recommendations of the INRS, the security standard and factory inspectorate sets fire to.
Safety: protection of your equipment and your personnel, prevention of any fall of your products.
Railing: The railings are manufactured out of tube of section 35x35 Misters standardized Hauteur of 1100 mm, including/understanding smooth, under stringer and plinth.
Standard safety fence LOCKS: Only system recognized by the CRAM, the barrier lock is planned for the installation and in full safety deposits pallets by the lifting truck. Manufacture out of square and round tubes. Yellow completion epoxy painting.
|
|
Tack welded tubular structure. Platform covered with sheet metal with or without retention, with galvanized non-skid steel decking hot; Fixed or dismountable platform; Feet with paste of fixing on the ground. FRENCH MANUFACTURE
MANERGO proposes to you a whole range of platforms to your measurements, being able to answer all kinds of application. All our platforms answer the security standards in force.
|
|
PLATFORM ISOPLAN: THE PLATFORM WITH THE 3 PATENTS
CAPITALS
N°1 patent: Key point of the concept, the capital ensures the connection between the beams and the posts. The capital is resting against the post and is blocked by two keys. This process without welding makes it possible to transmit the efforts to more close to neutral fiber and on the angles of the posts. The definition of load is controlled perfectly thanks to the theoretical calculations confirmed by the tests.
AUTOCONNECTS
N°2 patent: Autoconnect allows the combination of 24 technical profiles high strength, the optimization of the combination by the data-processing calculation of each project gives the ideal solution (48 possibilities)
2 bolts ensure an exceptional reliability.
ANTIDEVERSEMENT
N°3 patent: Patented system of stabilization of the long beams carried up to 9 meters. Its need is determined by the software: safety and optimization are obtained by data processing.
|
|
The PODIUM UNIT FOR LIFT SHAFT includes/understands:
A cast solid framework Of the extensible cross-pieces Of the slides of extension postpones folding and adjustable mountings in height Two beams of safety extensible in length retained by chains a railing partly low a plywood ép flooring. 30 mm
|
|
Industrial/Warehouse Mezzanine platforms can enable you to expand your business without moving, building or acquiring new premises - simply by making use of the space over-head.
Free initial site survey, Detailed quotation with CAD drawing, full building regulations application, in-house design and manufacture, experienced and qualified installation team, Project management
|
|
Punt forms heavy for storages and offices
Our platforms ensure the return on your investment:
• Specialist in the great ranges up to 12 meters.
• Specialist in the strong loads of 350 kg to 4000 kg/m2.
• Delivery period and very fast assembly.
• An entirely flexible range,
|
|
|
Lifts: DICTATOR provides bespoke lifts. Whether you choose the Homelift DHM300 in accordance with the machine standard or the DHE lift in accordance with EN 81-2 standard: both lifts are manufactured individually and take full advantage of the given space. They are particularly suitable for installation into existing buildings as they require minimal pit and headroom. In case there exists no lift shaft, the DICTATOR lift shaft system presents the ideal solution.
|
|
DUWIC’s platforms enable you to double the storage surface area in your warehouses. They are modular as they can be adapted to suit your needs.
Made from very high-resistance cold metal section metal, these are real platforms on solid posts.
Our design office assesses and determines the most appropriate solution depending on your limitations (fixed or rolling loads, passageways under the structure, etc)
DUWIC’s palette safety augmentation system (SAS) ensures greater safety for your handling of palettes on platforms.
|
|
An economic solution to increase your buildings without push the walls.
An exceptional reliability thanks to the minimum of components (bolts, beams,...)
A set-up time twice faster
Absence of welding guaranteed by a solidity tested in laboratory.
- Light Framework - Modularity - Note of calculation included/understood - Broad choice of color
Certified ISO9001
Metal posts of section 120x120 Misters Their thickness is adapted according to the running cost. The broad ones platinizes 200x200 mm ép. 10 mm ensure a perfect burden-sharing. They are fixed on the ground by 4 M12x100 Ankles.
The carrying beams are carried out in profile C steel of completion Galvanisée, they come to be bolted on the capitals.
The beams are carried out in profile Σ steel of Galvanized completion, they come to be bolted on the carrying beams using autoconnect.
Profiles out of C and Σ are manufactured in several thicknesses in order to optimize the profiles according to the operational requirements.
|
|
|
After having conceived and having carried out structures in cold profile, TDEM was essential in the field of the industrial platform thanks to a concept answering the current constraints of the market and also the absolute respect of the standards in force.
|
|
|
The setting in safety of the operators and the speakers on the sites of production is an extreme priority. Within the framework of transfer operations of products, operations of loading/unloading, or for the agro-alimentary sector, at the time of operations of taking away, many of these interventions are carried out partly high cisterns or tanks. TECMECA-PACQUET with thought and studied for your installations a line of goods allowing you to ensure your operators and various intervening, a guarantee of maximum safety at the time of the operations of discharge, potting or taking away, just as easily combining the aspect put in safety, that the ergonomic aspect and ease of operation
|
|
| ... products without technical information |
| |
Lanner network appliances deliver industry-leading performance, IO and dependability. Deploy your application on a Lanner network appliance platform for best-in-class compatibility, service quality and long-term supply.
Companies use a network appliance because it provides the following benefits over general purpose servers or computers:
* Easy deployment - Simply unpack, power on, configure IP and you're done
* Compatibility - Removes local environmental factors
* Long-term brand value - An appliance is visible, attractive and a constant reminder to your value
* Purpose design - Appliances optimize performance, security and scalability
|
|
Lanner network appliances deliver industry-leading performance, IO and dependability. Deploy your application on a Lanner network appliance platform for best-in-class compatibility, service quality and long-term supply.
Companies use a network appliance because it provides the following benefits over general purpose servers or computers:
* Easy deployment - Simply unpack, power on, configure IP and you're done.
* Compatibility - Removes local environmental factors.
* Long-term brand value - An appliance is visible, attractive and a constant reminder to your value.
* Purpose design - Appliances optimize performance, security and scalability.
http://www.lannerinc.com
|
|
Lanner network appliances deliver industry-leading performance, IO and dependability. Deploy your application on a Lanner network appliance platform for best-in-class compatibility, service quality and long-term supply.
Companies use a network appliance because it provides the following benefits over general purpose servers or computers:
* Easy deployment - Simply unpack, power on, configure IP and you're done
* Compatibility - Removes local environmental factors
* Long-term brand value - An appliance is visible, attractive and a constant reminder to your value
* Purpose design - Appliances optimize performance, security and scalability
http://www.lannerinc.com
|
|
|
|
|
|
Enterprise
Model NAR-7080
2U communication appliance rack-mount server with redundant PSU and flexible Ethernet modules
Dual Intel® Nocona CPU with 1/2M L2 cache/ 800MHz FSB
Flexible removable Ethernet modules
Up to Twelve Gigabit Ethernet ports
Optional crypto PMC card
Four DDR400/DDRII memory slots
Up to two PCI-X expansion slots
Redundant 460W ATX PSU
Front access for user-friendly maintenance
Optional crypto solution
Bypass option
Small to Medium Business
Model NAR-5620
1U communication appliance rack-mount server with 2 PCI-E I/O modules and PCI-X expansion slot
Removable PCI-E Ethernet modules for flexible application request and easy maintenance
Supports Intel® Core Duo and Core 2 Duo CPU up to 2.33GHz
Supports FSB 667 MHz
Support DDR2 ECC RAM up to 4GB
Up to Eight Gigabit Ethernet ports
Support up to 4 bypass segments
Dual Personality for flexible use of Fiber-optical or copper interface
One real accessible PCI-X expansion slot
SOHO/ROBO
Model NAD-2070
Fanless Desktop Communication apliance platform with up to five Ethernet ports
Cost-effective fanless solution
Upgradeable to VIA V4 Eden 1.2GHz CPU performance
Support max to five Ethernet ports
256MB memory and SODIMM socket on board
Support Compact Flash and Disk on Module (DOM)
Optional bypass function for project base application
OS: support most updated Linux
Power adapter solution
|
|
| ... products without technical information |
| |
|
|
|
|
DLR-1250 diver launch and recovery unit
This system is used for offshore diving applications, the maximum lowering capacity is 90 meters so it can be used for offshore platform diving operations as well. It consists of an A-frame with 2 approved man riding winches and a redundant electrical driven hydraulic power unit. All fits a 20" standard size container; even 2 off DLR-1250 will fit in one 20" container. One winch is used to lift and lower the dive bell, the other for the clump weight; a third optional winch can be used as a utility/tool winch. The function of the clump weight is to keep the dive bell straight and steady under water. In case of an emergency or breakdown of the wet bell winch the clump weight winch will be able to lift the dive bell and clump weight together.
Designed to fulfil with the requirements of Lloyds and meets UK HSE regulations for personnel lifting operations on offshore installations. The winches and A-frame are dedicated for personnel lifting suitable for diving operations and offered with Lloyds Register of Shipping (LRS) Design Appraisal Certificate and full material trace ability. They have passed the EC testing for these applications, i.e., both the winches and their technical files are in compliance with the requirements of the EC Machinery Directives. The DLR-1250 also complies with IMCA regulations and comes with an ATEX certificate as well.
The DLR-1250 is available for sale or lease.
|
|
... see all the products in the category
Winches
|
|
SIM-Small Instrumentation Modules-is a compact test and measurement platform for a wide range of applications. Unlike other modular systems, SIM offers complete front-panel as well as remote operation, allowing you to choose between manual and computer control. Up to eight instruments share the same mainframe which provides power, clock synchronization, communications, and module status. For additional versatility, you can cascade mainframes or other RS-232 instruments, and even operate modules outside the mainframe.
|
|
|
|
see the results for the following category : 
