|
|
The Industrial Automation Group of Advantech introduces two new ADAM analog input modules, the ADAM-5017P and ADAM-5018P. The ADAM-5017P has eight different independent configuration channels, supports power reverse, and also has a wide uni-polar or bi-polar input range. The ADAM-5018P is a Thermocouple Input Module which supports seven input ranges and types (J,K,T,E,R,S,B), and will filter functions to remove any unreasonable range.
Both will support the High Common Mode function, which means channel-to-channel differential voltages can be up to 200 VDC. Now even more measurements, such as battery or power transducer/transmitter measurements can be achieved with this new design. Furthermore, they have over-voltage protection to avoid ranges ±60 VDC that protects the modules from power surges. Also, there is built-in TVS/ESD protection to protect the high-density, miniaturization, and complex equipment. TVS diodes avoid ESD and protect the electronic components. The ADAM-5017P and ADAM-5018P are both ADAM-5550 series expansion modules which are supported by the ADAM.Net Utility.
In the Facility and Machine Automation market, these modules can withstand harsh requirements and provide ideal and cost-effective options. The ADAM-5017P and ADAM-5018P modules are now available to the market. To purchase or if you have any questions, please contact Advantech at 1-800-205-7940 or your regional Advantech authorized dealer for more information. |
|
AIO160802AY-USB is an analog I/O terminal for USB 2.0 that can be connected to the USB bus.
This product has analog input (16bit, 8ch), analog output (16bit, 2ch), digital input (LVTTL x 4), digital output (LVTTL x 4).
AIO-160802AY-USB includes "C-LOGGER", a data logging software of Windows version. "C-LOGGER" is an easy-to-use yet very flexible tool specifically designed for user's data logging applications.
Users can also use the included driver library "API-USBP(WDM)" to configure the application software for Windows using the programming languages that support Win32AP functions. |
|
FEATURES
- Portable
- Modbus connectivity
- Simple setup and easy handing
- Upto 128 Module on RS485 network
- Isolated modules avalible for special applications
- Low-cost IO modules addition to existing PLC system
- Standard software for module configuration and trouble shooting
- Date acquisiton software for data storage and Real-time analysis on PC
- IO modules used with the third party softwares via Modules RTU Protocol
- Interface with field devices to provide real-time data for SCADA / PLC / HMI
- LEDs on every modules for digital IO status, communication and power supply
- Different types of IO Modules AI, AO, DI, DO, RTD, Thermocouples are available
- Direct reading of temperature without scaling by using RTD and Themocouple Modules |
|
The ditital and analog I/O Modules from Systeme Helmholz are suitabele for use in S7 300 controllers from Siemens. Our product range includes a whole range of the most commonly required modules.
The compatible Helmholz I/O modules are very easy to integrate and without programm changing and have following features:
Hot-swap compatible, UL and UL Class 1, Div 2 certificated, usable in the main and extention rack, price effective.
|
|
JetI/O 6550 is a Block I/O module equipped with 14 channels Digital Input, 8 channels Digital Output connectors. JetI/O 6550 provides 16 bit resolution and high accuracy. It also supports event counter for DI mode, pulse output for DO mode. The flexible Conditions& Go (IF-Then) rules can help users to define intelligent logic rule for remote I/O control.
JetI/O 6550 provides Windows Utilities, SNMP and Web for configuration. Industrial Modbus/TCP protocol and OPC Server driver for integrating JetI/O with existed HMI/SCADA. Robust aluminum case is with good heat dispersing and IP31 protection. With JetI/O users can easily perform status monitoring and control the remote I/O devices. |
|
| The fieldbus product portfolio by Turck comprises a complete spectrum for all common industrial fieldbus systems of factory and process automation. From active I/O modules through to network components right up to diverse bus and supply cables, Turck provides complete fieldbus solutions from a single source which fulfil the highest industrial requirements. |
|
Stand-alone I/O modules with RS485 Modbus RTU interface
Multifunction, accurate, configurable, intelligent
sigmadue® I/O Modbus is a new family of remote I/O modules for a wide range of industrial applications.
The modules' interface is RS485 with RJ45 connector, just a clic is enough to connect them with common ethernet cables CAT5.
Analog modules: combine some precious functionalities like signal conditioning, scaling, engineering unit conversion, threshold alarms management with hysteresis, waveform generation.
Digital modules: combine the latch input function, pulse generation, PWM generation, frequency and pulse counting input.
Software configurable with Configurator Explorer, they are the best choice for distributed data acquisition systems.
|
|
The SPC-8520-LA and SPC-8521-LA are economical, PCI bus type and half-size embedded CPU boards that comply with Pentium® M / Celeron® M processor with high performance, but because of the onboard Intel® 852GM chipset, these devices deliver lower prices compared to the current products that include 855GME chipset.
These two new CPU boards support memory capacity up to 1GB with PC2100 DDR SDRAM(non-ECC). In addition to the wide variety of interface including RS232C/422A/485, two USB2.0 ports and 100BASE-TX, these boards are equipped with CF slot (IDE connection, OS-boot support), making it ideal for system configuration without HDD. For video output, these products include the LVDS and analog RGB interface that provide the Dual View to display two different views.
The SPC-8521-LA includes onboard Celeron M processor 800MHz (cashless, BGA package) and the heatsink to make the device fan-less. The SPC-8520-LA contains Socket 478 and supports PGA type Pentium M processor 1.6G - 2.0GHz(FSB400MHz) or Celeron M processor 1.3G - 1.5GHz(FSB400MHz). CPU for SLC-8521-LA is available as an option depending on how users use it.
|
|
With the IS1 R. STAHL present the second generation of Remote I/O Systems with intrinsically safe inputs and outputs.
IS1 is extremely simple to use: A CPU & Power Module and several input/output modules are snapped on to the BusRail (35 mm DIN rail). The unique PowerBus power supply concept, developed especially for use in hazardous areas, makes system planning as simple as for normal industrial I/O systems.
IS1 is particularly flexible: It can be used for small and large signal quantities with the possibility of installing field stations in Zone 1 / Division 1 or Zone 2 / Division 2. Installation in control rooms is also possible. An intrinsically safe fieldbus using copper-wire or fibre-optic technology connects field stations in Zone 1 with the automation devices.
IS1 is extremely economical: Modules with 8 or 16 inputs lower the price per signal. The optional ServiceBus in connection with the "I.S. Wizard" software or a HART-Management System cuts down the time for commissioning, trouble shooting and maintenance.
The new I/O modules for Zone 2 applications can be mixed with the Zone 1 modules on the same BusRail. With this it is possible to design very cost effective field stations. IS1 is now available with Industrial Ethernet / Modbus TCP interface.
Modular Remote I/O System for 35 mm DIN rail mounting:
Installation in Zone 1 / Division 1 or Zone 2 / Division 2, Zone 21 and Zone 22, safe areas
Fieldbus communication: Modbus RTU, Profibus DP V0 and P V1 HART, Industrial Ethernet
Hot swap for all modules
Redundant internal system bus
Full redundancy (many control systems) or line redundancy (all control systems)
Field enclosures in many versions |
|
deltadue® series acquisition modules with fieldbus for DIN rail mounting
A complete range of compact and flexible modules open to the external world
deltadue® acquisition instruments series is composed by single and double channel analog modules and by 6 inputs and 2 outputs digital modules.
|
|
The ISbus fieldbus system product series includes components and systems for use on Profibus PA and FOUNDATION fieldbus H1
Installation in Zone 1, Zone 2, Zone 21, Zone 22 and Division 2
Different field device couplers to connect intrinsically safe and non-intrinsically safe fieldbus
Integration of simple, binary signals in the fieldbus via intelligent digital I/O couplers
Redundant fieldbus power supply with galvanic isolation of fieldbus segments for FOUNDATION fieldbus H1
Field housings of different sizes and materials, such as plastic, stainless steel and aluminium
System solutions for field installations and integrated solutions in combination with remote I/O |
|
| Foundation Fieldbus H1 level has been designed as a digital replacement of the 4 to 20mA standard in the process industries. Foundation Fieldbus is also a LAN (Local Area Network) for instruments used in both process and manufacturing automation with built-in capability to distribute the control application across the network. The physical wiring is also fully compatible with intrinsic safety (IS) or nonincendive wiring standards and may be used in hazardous, as well as general purpose areas. In hazardous areas standard explosion-proofing or power limited concepts may be used, as well as IS concepts, offering greater cabling design flexibility. |
|
The Industrial Automation Group of Advantech introduces the ADAM-5081, a high speed quadrature encoder and counter module for use with the ADAM-5550 series Programmable Automation Controllers (PACs). The ADAM-5081 has a high isolation of 2,500 VDC, a high speed frequency mode (5 Hz ~ 1 MHz), and a counter code at 1 MHz. There’s also an advanced digital filter to eliminate noise and interference (1 ~ 65000ì sec) which ensures accurate data collection and transmission.
The ADAM-5081 features four counter modes (up/down, bi-directional, up and A/B phase modes), which counts precise data units in minute detail. The frequency mode of the ADAM-5081 supports up to eight channels and can control a wider range of electromagnetic wave status under certain conditions.
The ADAM-5081 supports four digital output channels, which can be triggered by a preset counter value, and can watch the position encoder of the machine while doing the position comparing. Once the preset value is reached, the system requires a digital output signal to trigger the camera. With built-in DO channels already in the ADAM-5081, the respond speed is maximized.
For applications requiring high speed data collection with high accuracy, such as facility automation and machine automation, and the ability to withstand harsh environments, the ADAM-5081 module is the optimum choice. To purchase or if you have any questions, please contact Advantech at 1-800-205-7940 or your regional Advantech authorized dealer for more information. |
|
PROFIBUS DP Master/Slave Module for CompactRIO™
The COMSOFT cRIO PB module connects the CompactRIO chassis directly and for the first time to PROFIBUS DP networks. |
|
High-performance distributed I/O system
Gateway for GDNET network
Gateway for main field Busses
Entirely configurable via software
Completely remote from the field
Modular
Simple for cabling
Sturdy
|
|
Flex Networks I/O systems : 20 I/O units connected on Flex to 6/12 Mbps.
for Touch PLCs (AGP3000 Series) .
- From 8 to 64 I/O , analog I/O, High speec counter... |
|
Option to network the Schlegel control units and pilot lights (control devices, operator consoles, panels...) to the most common Fieldbus systems (such as AS-Interface, CANopen, Profibus DP, ...).
The Fieldbus compatible Schlegel control units are particularly for applications using a large number of control units and pilot lights to be connected to the Fieldbus at less wiring effort. |
|
The BradControl family of I/O modules provides a reliable solution for connecting industrial controllers communicating on industrial networks to I/O devices. Both in-cabinet and on-machine harsh environment applications are supported.
In-Cabinet:
The BradControl Block I/O system is an effective way to connect industrial I/O devices to a PLC or PC controller over Ethernet. The BradControl interface solution is comprised of a network adapter and up to 32 expansion modules mounted in an enclosure close to the field devices.
On-Machine:
BradControl I/O modules provide a reliable solution for connecting industrial controllers communicating on Ethernet to I/O devices in harsh environments. Rated for IP67 environments, BradControl I/O modules can be machine mounted and are able to withstand areas where liquids, dust or vibration may be present.
|
|
The BradControl family of I/O modules provides a reliable solution for connecting industrial controllers communicating on industrial networks to I/O devices. Both in-cabinet and on-machine harsh environment applications are supported.
In-Cabinet:
The BradControl Block I/O system is an effective way to connect industrial I/O devices to a PLC or PC controller over PROFIBUS. The BradControl interface solution is comprised of a network adapter and up to 32 expansion modules mounted in an enclosure close to the field devices.
On-Machine:
BradControl I/O modules provide a reliable solution for connecting industrial controllers communicating on PROFIBUS to I/O devices in harsh environments. Rated for IP67 environments, BradControl I/O modules can be machine mounted and are able to withstand areas where liquids, dust or vibration may be present.
|
|
I/O modules for field applications
The ifm field modules are available in different versions for different applications. The ProcessLine for food and process automation with the protection rating IP69K, the CompactLine for robust applications and the ClassicLine for standard applications, both in IP67. Illuminated pushbutton modules complement the product range.
|
|
The increasing level of automation in machines and systems and the consequent rise in the number of I/O devices have in turn increased the amount of wiring required. Decentralised I/O systems bring order to this chaos. Lenze offers two product concepts with IP 20 degree of protection which are suited to both simpler digital applications and more complex automation tasks.
Compact system
The compact version is available in 8, 16 and 32-channel modules with up to 24 inputs and 8 outputs, using single or three-wire technology.
more >>
Modular system
The modular version consists of three components: a gateway, electronic modules and a backplane bus. Up to 32 elements can be combined as desired.
|
|
Analog I/O
14 and 16 bit resolution
CB COM Evaluation Kits
Temperature
Analog Output
12-bit or less resolution
14 and 16 bit resolution
Digital I/O
Counter-Timer
High Voltage
Parallel
Serial Communications
CB-COM Communication Interfaces
|
|
| Foundation Fieldbus H1 level has been designed as a digital replacement of the 4 to 20mA standard in the process industries. Foundation Fieldbus is also a LAN (Local Area Network) for instruments used in both process and manufacturing automation with built-in capability to distribute the control application across the network. The physical wiring is also fully compatible with intrinsic safety (IS) or nonincendive wiring standards and may be used in hazardous, as well as general purpose areas. In hazardous areas standard explosion-proofing or power limited concepts may be used, as well as IS concepts, offering greater cabling design flexibility. |
|
| The DeviceNet protocol dramatically reduces costs by integrating up to 62 devices on a 4-wire trunk network. Communications data is carried over two wires with a second pair of wires carrying power. Discrete and analog devices may be connected into the DeviceNet protocol. |
|
| AS-Interface networks up to 62 field devices onto a single pair of wires that delivers both signal and power. Actuator Sensor Interface, or AS-Interface, was developed by a group of sensor manufacturers and introduced into the market in 1994. Since that time, it has become the de facto standard for discrete sensors in process industries throughout the world. AS-Interface may be used in hazardous process environments using explosion proof, tray cable, nonincendive and for nonincendive wiring protection concepts. |
|
Flexible I/O for SCADA, Sequential Event Reporting, and Station Integration. Add up to 37 inputs and outputs to an SEL-2032 system. The base unit includes three digital outputs and two digital inputs. Use each of four card positions for one of the following I/O cards: eight analog inputs for dc process values (One card maximum), eight digital inputs to sense status of contacts, eight digital outputs to control external devices. Time-Tagged Sequential Events Recorder (SER). Store up to 512 SER reports of digital input transitions, time-tagged to the nearest millisecond. Send the SER data to a communications processor for system analysis and troubleshooting.
|
|
The VIO-2 module is used for the input and output of analog signals within a voltage range of ± 10 V at a resolution of 5 mV.
Features
Each module has 2 inputs and 2 outputs
Up to 5 modules can be accommodated within one SYSTEM-90E
Inputs and outputs are connected via rugged pluggable screw terminals |
|
| The CAN Analog module offers a compact DIN rail mounted analogue input capability Can Analogue for Trio Motion Coordinators. Each module provides 8 channels of 12-bit analogue inputs (+/-10v). Up to 4 modules may be connected to the CAN link which may be up to 100m long, considerably reducing machine wiring. |
|
| The Trio CAN16 I/O module offers a compact DIN rail mounted I/O expansion capability for all Trio Motion Coordinator controllers. Up to 16 modules may be connected to the CAN link which may be up to 100m long. This provides 256 bi-directional channels of distributed I/O at 24Vdc level. All points are short-circuit proof and competely isolated from the CANbus. The Trio CANbus I/O expansion can considerably reduce machine wiring. |
|
SmartStix I/O is a terminal-block style I/O that connects to CsCAN, Profibus or Devicenet Networks.
DIN-rail Mounted, with Removable Terminal Strip - SmartStix I/O is extremely compact, providing 16 and 32 point digital I/O in a package only 39mm deep and a footprint of 50 x 110 mm or 50 x 177mm .
With its small footprint, SmartStix I/O takes up very little panel space whether located in the main control panel or tucked away in a remote location.
The terminal Strip is removable leaving the wiring intact for easy field servicing.
It can also be used to expand the I/O capacity of our range of Operator Intefaces and Operator Control Stations(OCS) and is very cost effective as remote digital and analogue I/O.
| | |
