|
|
Pneumatic positioner for propotional acting :
The device positioner is particularly suitable to govern rotary actuators; used on butterfly or ball valves. |
|
| AGI offers a full line of pneumatic rotary actuators. All rotary actuators are rack and pinion design and incorporate output flange hard stop. The hardstops stops the output flange directly so there isn't any pinion breakage. The units are ultra hi torque pneumatic actuators due to cross porting the two piston bores. The extremely low profile package is excellent in tight space applications. There are five sizes available with manifold and mid stop options. Torque output ranges from 7in-lbs. to 310 in-lbs. @ 100 psi. |
|
On the basis of jack famous without stem ORIGA which proved reliable in tens of thousands of applications, HOERBIGER-ORIGA proposes the most complete solution for the realization of linear movements.
Conceived completely modular, range ORIGA SYSTEM MORE answers all the industrial applications of the jack without pneumatic and electric stem.
In all more than 500 possible alternatives. |
|
MSC, ZSC and MSN elements of the Easy-2-Combine.Dia range. 6 with 25mm, standard races 10 with 200mm.
Ideal solution for the projects of automation and assembly.
Optimization of the guidance and the sweeping force.
Easy maintenance.
|
|
Modular concept of assembly of elements of automation without interfaces (direct assembly) 208 combinations.
Possible indirect assembly: plan, interface and provided screws and bolts.
Reduction of study and maintenance.
Effective, simple, economic.
|
|
RCM, RAN, RAP and RWT. Swing angles:
90,100,180,190,270,275,360° and indexable.
Precise positioning. Many possibilities of fixings. Assembly simple and fast of the parts to be added specific to the customers.
|
|
Narrow Profile Air Table Actuators
The NPA actuator provides precise load guiding with a recirculating ball rail above its bore.
Two bearing styles are offered (single/double bearing block) to accommodate both lower cost and higher precision/cost applications.
With standard strokes up to 120mm, the NPA offers longer travel length than any competitive actuator of its type.
Bore sizes: 12, 20, 32mm. |
|
Diameters 18, 25, 32, 40, 50, 63, 80 mm
Stroke length 10 ... 3,000 mm
Force 153... 3,016 N
Position sensing
Adjustable cushioning
Guide variants
- Basic guide
- Plain bearing guide
- Ball bearing guide
- Heavy-duty guide.
|
|
Diameters 8, 12, 18, 25, 32, 40 mm
Stroke length 1 ... 5,000 mm
Force 30... 754 N
Position sensing
Various cushioning options available
Guide variants
- Basic guide
- Plain bearing guide
- Ball bearing guide.
|
|
The Series 60 cylinders have been designed to comply with the dimensions laid down] in the DIN/ISO 6431 standards. A permanent magnet is mounted on the piston in these cylinders which enables, by means of proximity switches positioned along the cylinder tube, receiving information about the piston's position.
This cylinders series is normally equipped with adjustable end-stroke cushioning. Moreover these cylinders are equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke. |
|
| The Airpel Air Cylinder does away with any perceptible stiction. And reduces running friction to exceedingly low levels. This gives it the unique ability to impart super smooth motion – motion smoother than any other air cylinder. Even at very low pressures. Even at very slow speeds. Even with very short strokes.Even after standing idle for years! How do you account for this remarkable performance? The Airpel incorporates a unique construction to become an instrument-quality air cylinder. It uses a precision fit graphite piston which slides freely – without lubrication – inside a Pyrex® glass cylinder. This makes it ideal for forces from a very few grams to 30 lbs. or more. In fact, Airpel is particularly well-suited to applications requiring smooth motion at ultra-low pressures – and to moving lightweight objects or delicate loads at slow or high speeds. But this air cylinder is no weakling. It can be used to provide brute forces, too – operating under extreme temperatures, at very high speeds and cycle rates, with no degradation in performance. It also runs cleaner than typical air cylinders because it contains no oil. What’s more, it has no rubber or plastic seals to abrade, wear out, or harden with time. And because all exposed surfaces (except pivot model bushings) are stainless steel and nickel, Airpel is extremely clean and corrosion resistant. |
|
The GLOBAL SERIESTM Cylinder has been a very popular addition to the Pancake® Line of cylinders. This rugged, space savings cylinder is loaded with features not found in others. Available as a "hard metric" model, this cylinder is truly the choice for the International market.
Features:
10 Bore Sizes (12mm thru 100mm)
Strokes from 5mm to 150mm
Machined from Aluminum Extrusion
Duralon® Rod Bearing for Reduced Wear
Prelubed with Magnalube-G® Grease
Chrome Plated Stainless Steel Piston Rods
Air & Hydraulic Service to 150 PSI
10 Mounting Accessories
3 Port Choices - NPT & BSP Parallel/Tapered
Metric or Inch Rod Thread & Mounting
Plenty of Options Available
Magnetic Piston Sensing Available
|
|
Powerful, reliable and economical: these second generation compact cylinders are highly convincing with their standardised dimensions, a broad product spectrum and out standing performance.
? Diameters 12 ... 125 mm
? Strokes to 500 mm
? Wide variety of variants and sizes - going beyond the standard
? Mounting accessories for practically any installation requirements
? Cylinder sensor on 3 sides
? Software and CAD data for easy, reliable design engineering
|
|
Features Include:
- Simple Inlet Design
- Constant Air Flow
- Up to 7,000 RPM Capability
- Standard Built in Trapping
- Optional Trip Rod and Thru Port |
|
| The Airpel Air Cylinder does away with any perceptible stiction. And reduces running friction to exceedingly low levels. This gives it the unique ability to impart super smooth motion – motion smoother than any other air cylinder. Even at very low pressures. Even at very slow speeds. Even with very short strokes. Even after standing idle for years! How do you account for this remarkable performance? The Airpel incorporates a unique construction to become an instrument-quality air cylinder. It uses a precision fit graphite piston which slides freely – without lubrication – inside a Pyrex® glass cylinder. This makes it ideal for forces from a very few grams to 30 lbs. or more. In fact, Airpel is particularly well-suited to applications requiring smooth motion at ultra-low pressures – and to moving lightweight objects or delicate loads at slow or high speeds. But this air cylinder is no weakling. It can be used to provide brute forces, too – operating under extreme temperatures, at very high speeds and cycle rates, with no degradation in performance. It also runs cleaner than typical air cylinders because it contains no oil. What’s more, it has no rubber or plastic seals to abrade, wear out, or harden with time. And because all exposed surfaces (except pivot model bushings) are stainless steel and nickel, Airpel is extremely clean and corrosion resistant. |
|
| In addition to its broad line of standard catalog products, nearly half of Bimba's business consists of custom and semi-custom products designed for specific customers and applications. These products, used in machinery and automation, are sold to original equipment manufacturers and end-users throughout the world in an expanding variety of industries. |
|
| Custom designs are available. The Airpel cylnder can be modified to accomodate non standard length, stroke, materials and performance. The Airpel Air Cylinder does away with any perceptible stiction. And reduces running friction to exceedingly low levels. This gives it the unique ability to impart super smooth motion – motion smoother than any other air cylinder. Even at very low pressures. Even at very slow speeds. Even with very short strokes. Even after standing idle for years! How do you account for this remarkable performance? The Airpel incorporates a unique construction to become an instrument-quality air cylinder. It uses a precision fit graphite piston which slides freely – without lubrication – inside a Pyrex® glass cylinder. This makes it ideal for forces from a very few grams to 30 lbs. or more. In fact, Airpel is particularly well-suited to applications requiring smooth motion at ultra-low pressures – and to moving lightweight objects or delicate loads at slow or high speeds. But this air cylinder is no weakling. It can be used to provide brute forces, too – operating under extreme temperatures, at very high speeds and cycle rates, with no degradation in performance. It also runs cleaner than typical air cylinders because it contains no oil. What’s more, it has no rubber or plastic seals to abrade, wear out, or harden with time. And because all exposed surfaces (except pivot model bushings) are stainless steel and nickel, Airpel is extremely clean and corrosion resistant. |
|
Double-Wall Cylinders
One basic cylinder converts into six NFPA mounting styles.
Epoxy-coated aluminum tie-tube protects inner 304 stainless steel body tube from harsh environments.
6 NFPA rod end options and a variety of stroke lengths.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4".
Quick delivery of catalog models - off the shelf to 3 days!
Custom designed cylinders available to meet your exact specifications and requirements. |
|
Flat Cylinders
If your application is tight on space, our round, square, non-rotating, dual-power or three position Flat Line cylinders are the answer. These compact and repairable cylinders offer unequaled design, versatility and reliable performance.
Benefits of Flat Cylinders Include:
* 304 stainless steel cylinder body with a mirror finish I.D.
* Stainless steel fights corrosion and scoring from dirt particles
* Longer piston seal life
* Oil impregnated bronze rod bushing is standard in all models
* Ground and polished 303 stainless steel piston rod
* High strength piston to rod connection
* Precision machined, anodized aluminum alloy heads |
|
Integrated double effect cylinder Ø20 to 50 mm
Precise and sturdy guide: great resistance to radial load (conveyor thrust…)
Compact, strong, and precise, they resolve all small stroke where rigidity is required
|
|
Twin Bore Cylinders
Small cross-section, double-bore cylinder that provides highly accurate linear motion.
Incorporates extra long piston rod bearings, resulting in high radial load capacity.
Single and double end rod units are available in both Delrin® and ball bushing styles. The highly precise Air Table incorporates a rigid linear rail with recirculating ball bearings.
3 Cylinders in the series: Basic Twin Bore (TB), Double End Twin Bore (TBD), and Twin Bore Air Table (TBA)
TB: Dual bores exert twice the fore of a traditional cylinder while providing smooth, non-rotating actuation. The cylinder is symmetric and can be mounted from either side to allow convenient port access.
TBD: Double rod end provides a saddle-mount unit with improved loading and resistance to deflection.
TBA: Smooth, precise movement is achieved via integration of a highly accurate recirculating ball bushing rail.
Options available for Side Mounting Holes and Shock Absorbers. |
|
The Slide Units Séries QCTF - QCBF are available in four différent sizes and hâve been designed to be used in (applications where space is limited and when the load must be guided. Regarding the bearings, the Slide Units are available in two versions, one with double sintered bronze bushes (Mod. QCTF) and the other with double linear bail bearings (Mod. QCBF). The QCTF version would normally be selected when the side loads applied to the slide unit are high. Model QCBF slide units are suitable for fast cycles (less side load) and higher précision. Regarding the end cushion: The Slide Units Séries QCTF - QCBF are available in three différent variants:
A. fixed mechanical cushion (standard),
B. with two shock absorbers located on the body and
C. with one shock absorber located central on the rear flange.
Accordingly, the variant B and C are suitable for
handling of higher mass forces and / or when it's
necessary to adjust the stroke.
The design of the Slide Unit body allows the moun-
ting of the Slide Unit using either top, bottom or
side faces.
Several T shaped grooves in two faces allow
magnetic sensors Mod. CST to be fitted in a number
of positions. |
|
• Pneumatically adjustable end position cushioning or shock absorbers
• End-position accuracy < 0.05 mm
• Precision stroke adjustment in advanced and retracted position
• 2 bearings per guide rod
• Diameters 12 ... 63 mm
• Strokes up to 400 mm
• Plain-bearing guide/recirculating ball-bearing guide
|
|
| The Airpel Air Cylinder does away with any perceptible stiction. And reduces running friction to exceedingly low levels. This gives it the unique ability to impart super smooth motion – motion smoother than any other air cylinder. Even at very low pressures. Even at very slow speeds. Even with very short strokes. Even after standing idle for years! How do you account for this remarkable performance? The Airpel incorporates a unique construction to become an instrument-quality air cylinder. It uses a precision fit graphite piston which slides freely – without lubrication – inside a Pyrex® glass cylinder. This makes it ideal for forces from a very few grams to 30 lbs. or more. In fact, Airpel is particularly well-suited to applications requiring smooth motion at ultra-low pressures – and to moving lightweight objects or delicate loads at slow or high speeds. But this air cylinder is no weakling. It can be used to provide brute forces, too – operating under extreme temperatures, at very high speeds and cycle rates, with no degradation in performance. It also runs cleaner than typical air cylinders because it contains no oil. What’s more, it has no rubber or plastic seals to abrade, wear out, or harden with time. And because all exposed surfaces (except pivot model bushings) are stainless steel and nickel, Airpel is extremely clean and corrosion resistant. |
|
| Good for applications where space is at a premium. No mechanical connection to the piston. Fully enclosed actuator body prevents contaminants from entering. Air or oil actuated to 100 PSIG. Operation temperature range of 0°F to 170°F. |
|
Miniature "Cube" Cylinders
CFS-01011-A is a double-acting, miniature "cube" cylinder (1/2" x 1/2" x 1/2") ideal for applications requiring low output force in extremely tight spaces.
Has been successfully applied in various semiconductor industry applications. Several are mounted side-by-side in a test fixture for circuit board continuity testing. Another application involves silicon wafer processing, in which the cylinders are used to clamp wafers during certain operations.
Stroke Length: .125". |
|
|
