|
|
Benchmark for the standard: profile slots for integrated cylinder switches. Wide range of variants and mounting options.
• Diameters 32 ... 125 mm
• Stroke lengths 1 ... 2,000 mm
• With adjustable end position cushioning (PPV)
|
|
Three-Position Cylinders
Bimba's Three-Position Original Line stainless steel body cylinder provides three positions with a single cylinder.
Bimba offers the performance and quality of the unitized Original Line cylinder design along with three positive stroke positions. |
|
TRD Manufacturing
TRD Manufacturing Cylinders are recognized for their durability, high quality construction and long-lasting performance. Manufactured in several different types including, NFPA-interchangeable cylinders, specialized cylinders and accessories, TRD Cylinders represent a significant step towards Bimba's strategy to expand their industry-leading line of actuators.
Advantages of TRD Cylinders Include:
* Space saving design
* Many cylinder options to choose from
* Precision designed to provide accurate linear movement and positioning
* Other models include all stainless steel (SS) and electroless nickelplated (EN), and low friction for smooth operation (LF) |
|
ISO 6431/ 15552 - VDMA 24562 - NF E 49-003 compatible cylinder - PEC type
Available functions :
* single acting
* double acting
* double acting, through rod
* ollow through rod
* supply on the same extremity
* rotation-proof device
65% volume saved compared to an ISO 6431 cylinder
|
|
PS Series Linear Slide
The PS series is a compact lightweight unit with a replaceable air cylinder. Floating piston rod coupling eliminates cylinder binding. Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance. Aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or fixturing. Standard end plate to stop shaft vibrations.
Features:
Body: Anodized aluminum for reduced weight with multiple mounting surfaces with dowel location holes. Compact size for added space savings
Air Cylinder: Standard stainless steel body and rod for corrosion resistance and permanently lubricated for non-lube service.
Alignment Coupler: Isolates piston rod from side loading, increasing service life.
Optional Shock Absorbers: Recommended for high cycle applications to absorb shock loading, and provides end of stroke adjustment.
Optional Proximity Switch Sensing: For applications requiring end of stroke verification, available for extend and retract positions.
Rear Tooling Plate: Dampens guide rod vibration for smooth operation, and houses shock absorber for extend position.
Bearings: Four recirculating linear ball bearing for maximum load capacity that are sealed from contamination. Self-aligning for maximum guide rod support.
Guide Rods: Hardened steel to Rc60-65, precision ground and polished. |
|
Series CRS
PHDs newly redesigned Series CRS Cylinder now features a self-lubricating nitrile piston seal to increase cylinder performance and provides the best unit life rating in its class of 70 million linear inches of travel! In addition, this compact cylinder now features a clear anodized extruded body with integral slots for flush mounting of PHDÆs Series 6790 Miniature Switches for additional space savings. Optional shock pads extend cylinder life and minimize piston noise without increasing the length of the cylinder. The compact size of the Series CRS Cylinder makes it ideal for applications where cylinder length is critical.
Advantages: Compact size, eight bore sizes, integral switch slots, thru and threaded holes for easy cylinder mounting, available with two piston lengths. |
|
Series CTS
Series CTS Compact Guide Rod Cylinders excel in non-rotating cylinder applications where unit length is critical. They also perform as light duty slides where precise location is not required and side loading is limited. Optional shock pads extend cylinder life and minimize piston noise. The shock pad design adds no additional length to the cylinder.
Advantages: Compact size, thru and threaded holes for easy cylinder mounting. |
|
Series A, AV, HV
Tom Thumb© Medium Duty Cylinders (3/4", 1", and 1-1/8" Bore Sizes) are available in a wide range of mounting styles and options. All units are of tierod construction and repairable. Available in single or double-acting.
Advantages: Wide range of options and sizes makes it fast and easy to select suitable cylinder.
Series A3V, H3V, A3
Three Position Cylinders provide three positive stop positions in a single rod unit. The positions are achieved through an auxiliary cylinder integrated into the three position unit.
Advantages: Four standard bore sizes available, standard stroke lengths range from 1/4" to 6" for each cylinder. |
|
High performance, long life, low maintenance: the top quality of HOERBIGER-ORIGA's rod type cylinders is a result of decades of experience. Special customer specific solutions are part of our daily business.
Innovative cylinder concepts with excellent characteristics are the basis of the HOERBIGER-ORIGA cylinder programme. The inherent advantages are important factors for operation in system solutions. Modern automation with high efficiency is no longer a dream. Special solutions, which are developed for individual projects, guarantee optimal efficiency. |
|
This comprehensive range of pneumatic actuators includes conventional ISO and VDMA cylinders, guide units, slide cylinders, compact and clamp cylinders.
|
|
ISO/VDMA Series Metric Standard Interchangeable Cylinder
The ISO/VDMA Series is an aluminum body air cylinder line that is designed to meet all your international cylinder requirements. In fact, our ISO/VDMA Series cylinders are designed to meet the requirements of ISO 6431 (International) and VDMA 24562 (Germany). The combination of lightweight aluminum construction and proven reliability makes our ISO/VDMA Series the Superior Interchangeable metric, international standard air cylinder line.
GeoMetric® ISO/VDMA Cylinder
The GeoMetric® Series conforms to the following cylinder specifications: VDMA 24562, DIN/ISO 6431, and ISO/FDIS 15552. One of the most desirable features of the cylinder line is the dual switch/sensor groove design that is a standard offering on all GeoMetric®cylinders. The dual groove design offers great flexibility when mounting switches and sensors to the cylinders. One groove is a traditional round groove and the other is what we call the CombiGroove®. The CombiGroove® is a unique design that will accept round and angular switches/sensors. |
|
| Conforming to ISO 6431, VDMA 24562 and NFE 49-003-1 standards. Seven ranges including SMART cylinder with stainless steel versions for all requirements. Double and single acting models with bore sizes from 32-200mm. Comprehensive choice of mountings. |
|
| Double and single acting cylinders with magnetic pistons. Featuring an attractive square style profile barrel with concealed tie rods and integrated grooves for flush mounting off magnetic sensors. Low friction long life seals. |
|
Series CV
New Generation Series CV Cylinder design enhancements include increased width of PTFE wear ring for greater support, durability, and increased piston seal retention for higher speed applications. A new imperial design of the Series CV Cylinder is available with imperial ports, stroke length, and rod for easy integration in imperial facilities. A rod seal retention ring has been added to improve performance in extreme applications. Units affected by these enhancements include Series SK/SL, SG and SCV Slides.
Standard features of the Series CV Cylinders include rugged and lightweight anodized aluminum alloy heads, caps, and tubes. Port Controls® regulate speed through the entire stroke. Standard alloy steel and optional corrosion resistant stainless steel piston rods are hard chrome plated for maximum life and durability. Female threads and a variety of mounting accessories provide ease of integration.
Advantages: Anodized aluminum alloy heads, caps and tubes, durable, robust, longer life, drop-in replacement. |
|
GeoSlide Series Guide Unit
The GeoSlide guide units utilizes Numatics GeoMetric ISO 6431 VDMA cylinders. The FHG & FHK series offers high load carrying capabilities in a metric package.
Features:
Bore sizes range from 32mm to 100mm.
Strokes up to 500mm.
Linear ball or bronze bushings option.
Available in a "U" style body.
LCX Series Linear Slide
The LCX Series linear slide combines cost-effectiveness with proven dependability. An economical alternative with greater load carrying capabilities.
Features:
Low Cost
High Load Capability
Stainless Steel Shafts Available
Engineered Plastic Polymer Bearing
Available in 3 Bore Sizes |
|
Inflated with air or a fluid (water, oil, glycol...) depending on the application, PRONAL flexible lifting bags are pneumatic components which perform mechanical functions such as pushing, squeezing, guiding, clamping, blocking, damping, lifting, moving...
They are easy to incorporate within mechanical systems and are used in presses, moulds, conveyors, handling robots, lifting tables...
Advantages :
- thin when empty,
- compact,
- uniform lifting power
- very easy to adapt,
- high lifting force.
A highly diversified range of products
- standard square shape (100 to 1,000 mm in length), single or multi-stage, inflation pressure up to 7 bar (12 models),
- customized rectangular or curved shape, all sizes,
- multiple accessories which can be adapted to the environment.
Made from elastomer-coated fabrics, flexible lifting bags are vacuum vulcanised at a temperature of 140°C. |
|
Series 1000-8000
Series 1000-8000 Rotary Actuators are a rugged line for pneumatic or hydraulic service. These units have a wide range of rotations, options, and shaft configurations allowing them to be configured for most rotary applications. Standard rotations range up to 450° with torques to 31,800 in-lb.
Advantages: Four bore sizes available in single and double rack models, wide range of options available. |
|
TORK-MATE - Pneumatic Actuators - 890 Series
The Tork-Mate 890 series extended life actuators are ideal for the operation of 90° turn devices such as butterfly valves, ball valves, plug valves, damper valves and other devices. Tork-Mate pneumatic actuators have features that are unique, providing many benefits to the user looking for worry-free service.
The Tork-Mate 890 series actuators feature pinion travel stops that allow a full /-10° of valve travel adjustment. As an option, extended stroke adjustment screws can be added for inexpensive throttling applications.
Special piston seals provide greatly extended life compared to standard O-ring actuators. All other bearings, seals and components have been engineered to provide superior and extended service lives. |
|
Metric cylinders are standard cylinders available in 3 duty types:
Standard Duty
Our most space efficient duty. Short rod bearing and thin piston design. Available as single or double rod end.
Intermediate Duty (Half Husky®)
A combination of our standard and Heavy duty. long rod bearing and thin piston, designed for medium duty service. Available as single or double rod end.
Heavy Duty (Full Husky®)
Longer rod bearing plus longer piston. Designed for heavy duty services. Available as single or double rod end. |
|
PNEUMATIC CYLINDER DOUBLES EFFECT - SIMPLE STEM
BORING: DIAMETER 94 has 400mm
PRESSURE Of USE: 1 to 10 BARS |
|
Turn-Act guided cylinders combine high strength, lightweight extruded bodies and the rigid support of composite or roller ball bearings with enersorb piston to provide an unparalleled guided cylinder product.
Features:
* 4 Base Models
* ½, 3/4, 1 ¼ and 2 ½ inch Bores
* Lift forces from 16-490 lbs.
* Precise repeatability
* Smooth operation
* High noise and energy absorption
* Extended cycle life and non-lube service
* Various custom options available. |
|
Jacks with stems HOERBIGER - ORIGA are recognized in the whole world for their robustness and their reliability in all the fields.
The various series, conceived according to standards ISO and VDMA guarantee a perfect interchangeability
The most various versions, developed starting from the standard models are available like "the INTERACT" an actuator with integrated control ordered in ASinterface |
|
Series of round jacks:
MECSTREME Æ25 with 125mm resists corrosion
(stainless 304)
and REXTREME Æ32 with 80mm resists the acids
(stainless 316)
Conform to the standard ISO 15552.
|
|
Series KPZ Dia. 16 with 100mm, race 5 with 100mm.
Double jack and simple effect, tandem and multiposition, possible antirotation.
Crossing, hollow or hexagonal stem. Food by the back. Small overall dimensions.
|
|
GPC Dia. 10 with 63mm.
Element of the range Easy-2-Combines.
Race 10 with 200mm. Exhausted stage or ball bush. Is appropriate for precise movements with high side loads. Easy adjustment length of race.
4 versions available.
|
|
Series OCT. Dia. 10 with 25mm. Threaded connections or Rapids prefabricated
Piston octagonal = profit of push de17% and stem antirotation.
Compact construction, shaped tube aluminum, 1 only form of mediums and detector for all the diameters.
|
|
TWC Dia. 6 with 32mm, bend standard 10 with 100mm.
High loads possible, anti-torsion, possible locking end of the road.
Design flat, easy to go up, many possibilities of fixing of the sensors.
Excel thorough obstruction ratio/.
|
|
Jack meeting the standard ISO 24562
Dia. 32 with 250mm.
Complete range.
Tie jack TRB, shaped PRA and PRB, specific jack agroalimentary ICL.
|
|
|
|
