|
|
Pneumatic conveying is a core technology of Gericke since more than 60 years! Suction conveyors are very compact, easy to install and simple to operate. The suction unit with its integrated receiving hopper can be placed on feeders, mixers, vessels.
Combined with a weighing sysem, the units work as suction weigher, meaning that batches can be measured during conveying cycle.
The system operate purely pneumatically and are therefore suitable for hazardous areas too.
|
|
Features:
- easy material aspiration and dust-free loading of machines
- gentle conveying, no seperation of material mixtures
- optimum hygiene conditions
- reliable filter systems in GMP quality
- simple to install and to operate
- low energy consumption
- favorable investment- and operating costs
|
|
|
ANVER TT Series Transfer Tubes instantly provide air movement the moment compressed air is applied and their transfer speed and output flow can be infinitely adjusted by regulating the input pressure. Made from aluminum with a durable anodized finish, they come in a wide variety of bore sizes from 0.375” to 1” (9.5 to 25.4 mm) I.D., with air flows from 15 to 145 SCFM.
|
|
They exploit the principle of the Coanda effect
They were originally designed for sucking and transporting products like dust, granulates, sawdust, grit, metal shavings, but are also suitable for oil spray and welding fumes
Characterised by their low head and very high volumetric yield
They can also be used as blowers, or for cooling surfaces
Maintenance free, good filtering of the compressed air supply is recommended
Available with intake diameters from Ø 7 to Ø 50 mm
|
|
* Patented COAX® technology.
* Available with a three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow, a Pi cartridge for high performance at low feed pressure or an Xi cartridge when high flow and deep vacuum is needed.
* Substantially lower air consumption as compared to conventional ejectors.
* Modular design.
* Available with multiple connection alternatives.
* Low noise level.
* Short evacuation time.
Supplied with a vacuum gauge.
|
|
Positive Displacement Vacuum Pumps
Vacuum pump packages are recommended for the higher rates over longer distances and continuous service. They are also used on many applications where a venturi unit would be adequate but sufficient compressed air is not available. They feature a positive displacement lobe-type blower and are complete packages with motor and blower, secondary material filter on the inlet and muffler on the outlet. These units are mounted on a heavy duty, forkliftable base and are equipped with belt guards conforming to current OSHA standards. Included are a glycerin-filled vacuum gauge and a vacuum relief valve. The secondary filter protects the pump from any carryover of material from the material receiver. Cartridges are easily changed by removing the end cover. Optional differential pressure gauge and/or switch can be furnished to indicate or shut down if filter should become restricted.
|
|
|
|
|
|
With a wide range of granule receivers ranging from 1,5 to 140 dm3, Piovan is able to offer the ideal solution for all conveying requirements. Three versions of vacuum receivers are available: granule receiver entirely in stainless steel (C models), version with 3 sight glasses (SR models) and in the configuration with glass section (GR units).
Maintenance:
> Effective and rapid cleaning operations
> wide filtering surface and solid steel frame, to guarantee continuous functioning of the system with no production stop for maintenance operations or replacement of the filter
> anti-wearing materials
Design: magnetic sensor integrated in the control box and factory pre-set. A led allows the operator to monitor when the sensor is activated.
Simplified and rapid installation: The possibility to adjust at 360° the adoptor ring as well as the material and vacuum lines, not constrained one another, simplifies the installation of the receiver in line with the plant configuration.
SIMPLIFIED AND ENHANCED OPERATOR INTERFACE: Easy3System
Plug&Play: The receivers are immediately ready for operation once connected, with factory pre-set loading cycles for optimal functioning. The working status and possible alarms are signalled in a user-friendly way with bright green and yellow leds positioned on the upper part of the control box, in a visible position.
The KEYPAD permits to customise the hopper loader’s functioning, setting the conveying times, the pause time between the loading cycles, the maximum number fo unsuccessful loading cycles, the modes of filter cleaning, and the functioning of the proportional valve.
Easy3System is compatible with the previous versions.
|
|
|
|
|
|
FEEDMAX B and BS/4 Series Loaders
The FEEDMAX B and BS/4 series loaders are built for highest functionality and demanding applications. The modular design of these vacuum loaders guarantees specific adjustment to meet individual customer requirements, as well as for simple cleaning.
- Complete flexibility – Stainless steel line size reducers can be easily interchanged to maximize flexibility.
- Superior wear resistance – Pneumatically actuated cast stainless steel material and vacuum valves for highly abrasive feeding applications.
- Low Maintenance – Interchangeable mirror finish stainless steel center section offers low maintenance and allows hopper capacity to be easily changed.
- Completely dustproof – Pneumatic discharge shut-off valve design permits clean
room operation for standard loaders.
- Highest operational reliability – Dustproof and pneumatically controlled material shut-off discharge valve.
- Ergonomic design – A hinged lid without valves or hose connections offers unmatched accessibility
for simple cleaning.
- Simple cleaning – One self-locking toggle latch is easily accessible and opens towards the operator.
- Easy operation – Modular assemblies with fully accessible quick release band clamps can be easily cleaned and interchanged.
- Easily visible – Status LED`s and pluggable control cable for all network control systems.
- Reliable – Material demand via proximity sensor standard with high heat execution.
|
|
CMP-25 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP40 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
ALD130P-18F is a double diaphragm air micro pump which well suited for compressing air.
Technical Features:
1.Double diaphragm air pump.
2.Uncontaminated flow.
3.Non-metallic construction.
4.Compact size.
5.Maintaince free.
6.Can operate in any installed position.
|
|
CMP-11 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
Con-Evator , PGT Vacuum receiver
High performance, environmentally-friendly vacuum hopper loaders covering all aspects of modern conveying technology for plastic materials. The PGT series is based on the vacuum principle and gives a clean, low-noise conveying of materials. No compressed air is required because of a unique non-polluting filter cleaning system. The specially engineered blowers also ensures optimum reliability and consistency..
|
|
| ... products without technical information |
| |
|
|
|
|
XVARI Technology
The breakthrough in hydraulic pump technology & ergonomics
Tremendously high oil delivery, precise control and ergonomic operation; three characteristics of the new XVARI® Technology pump developed by Enerpac. Never before have these three vital product characteristics been combined in one hydraulic pump. With XVARI® Technology, Enerpac has again set a new industrial standard for succeeding the 50-year old technology of current air-over-hydraulic foot pumps. The XVARI® Technology replaces the popular and widely-used linear air motor technology with improved ergonomics, precise metering of the hydraulic oil flow and also offers a higher oil delivery for increased productivity and efficiency.
XVARI ~ Be in control
XVARI® Technology enables users to continuously and precisely control the amount of hydraulic oil flow in advance and retract mode and thereby the speed of the hydraulic cylinder or tool that the pump is powering - specifically for jobs that require accurate load positioning, aligning and controlled descend. XVARI® Technology enables the user to better control the hydraulic application, improves productivity, enhances process quality and makes the workplace safer.
|
|
OLMEC pumps are used to supply pressurized oil, emulsion or water circuits, and hydraulic users operating in on-off mode.
These pumps operate with reciprocating motion, single-acting or double-acting, powered by a pneumatic control valve which stops when the maximum hydraulic pressure is reached, maintaining the pressure in the circuit without further air consumption. If the hydraulic pressure drops, the pump is automatically restarted to restore the preset hydraulic conditions.
The most common fields of application are:
hydraulic tests on seals and resistance with oil or water;
supply of cylinders for clamping, assembly and maintenance equipment;
fixed or mobile emergency work units;
oil or grease lubrication systems;
all environments with explosion risk;
Laboratory testing;
|
|
SKF Air-driven Hydraulic Pumps, THAP series
30, 150, 300 and 400 MPa (4 350, 21 750, 43 500 and 58 000 psi)
The THAP Air-driven Hydraulic Pumps are available in four different pressure versions. They can be used for mounting OK Couplings, large pressure joints such as bearings, flywheels, couplings and railway wheels. The pumps consist of a high-pressure hydraulic pump, driven by an air piston.
The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The pumps can also be supplied in complete sets, which consists of pump, pressure gauge, adapter block, highpressure pipe and connection nipples.
|
|
The pneumatically hydraulic high-pressure pumps of the series PMA are laid out for the promotion of liquids with pressure up to 2.400 bar, at a pneumatics printing of 7 bar. These high-pressure pumps become everywhere there
begun, where compressed air is available as energy source and where a high and/or highest hydraulic printing is needed for test or for test purposes and/or for other applications. With compression tests the systems which can be examined are filled, aired out with a suitable liquid (oil, emulsion, pure water) under low pressure and brought afterwards by the Madan PMA of high-pressure systems on the desired pressure. All pumps of the Madan PMA series are supplied in rustproof execution (high-grade steel material 1,4401). Thus long life span and maintenance-free operation are ensured.
|
|
|
|
|
|
The Enerpac ZA4 - The Next Generation in Air Powered Hydraulic Pumps
Introducing the ZA4-series, Enerpac’s newest high-pressure hydraulic air-driven pump designed for in-plant, industrial applications and medium to large construction projects. The new ZA4 pump features the Z-Class high efficiency pump design—a design known for its higher oil flow and bypass pressure. Whether powering a cylinder or operating a tool, the ZA’s industry-leading hydraulic flow at 700 bar will improve productivity in any application. And, because of their ATEX 95 certification, the Enerpac ZA Pumps are safe for use in environments such as refinery, petro-chemical and oil & gas processing.
Reservoirs come in 4 to 40 litres capacities. A sight gauge on the 4 and 8 litres models and a level gauge on the larger reservoirs allow quick and easy oil level monitoring. The manual control valves on ZA4-series pumps come with built-in user adjustable pressure relief valve. Standard models are available to fit most applications and custom configurations, when required, are available from an extensive ordering matrix.
The optional heat exchanger warms exhaust air to prevent freezing and cools the hydraulic oil.
Enerpac ZA Series Air Hydraulic Pumps—tough, dependable and innovative.
|
|
|
|
|
|
Hydratron Air Operated Hydraulic Pumps are capable of generating output pressures of up to 45,800 PSI ( 3,160 Bar ) when supplied with just 100 PSI ( 7 Bar ) air pressure. There are 4 model ranges offering flows of up to 7 gpm ( 31.7 Ltr per min ).
These pumps will maintain pressure within a system indefinitely without consuming power or generating heat plus their output pressure can be infinitely varied by simply regulating the driving air pressure.
These pumps are ideal for pressure testing, chemical injection and for hydraulic power applications. Standard models are suitable for oil or water service having wetted parts manufactured from stainless steel and aluminium bronze. Options include all stainless steel wetted parts for pumping more aggressive chemicals with isolation chambers which keep the pneumatic and hydraulic sections of the pumps completely separate. This is particularly desirable when pumping hazardous fluids.
Pumps can be supplied individually or mounted in Power Pack form in which case they are mounted within metal frames complete with reservoirs, all necessary air controls, output pressure gauges and pressure release valves.
|
|
- Air Drive line lubrication not required.
- Self-priming for immediate operation.
- Compatible with all hydraulic fluids, plain water, distilled &
deionized water, solvents, mild chemicals and most liquefied
aerosol type gases.
- Range of models to provide up to 80,000 psi intermittent
output pressure.
- Stainless steel hydraulic body, check valves, and trim are
standard, except -4 and -7 models.
- Alternative gases that can drive the pump include nitrogen,
vapor from liquefied gas, pipeline natural gas and sour
natural gas with proper modifications.
- Offer a wide range of standard modifications.
|
|
The air-hydraulic BELL units are meant to operate single and double acting cylinders depending on the versions. This type of pump can be applied in all the hydraulic applications, especially in those which require high performances and pressures, and in all cases in which the oil flow must be modulated and controlled.
There are many applications, in the industiial field, such as stirrup, presses, extractors, pullers, hose fitting, bead breakers, clamping equipments, as well as in the automotive field for example car and motorbike lifts, pulling bars for bodyworks straightening benches.
|
|
External adjustable pressure relief valve (behind sight glass)
Lower air consumption and operating costs
Return-to-tank port for use in remote valve applications
Internal pressure relief valve provides overload protection
High efficiency cast aluminium air motor
Air pendant for remote control operation
|
|
PP - Air/hydraulic pumps (series 1000)
PP-1000 air/hydraulic pumps are very compact one-stage pumps that work in any position, horizontally or vertically thanks to a rubber bladder built in to the tank. The pumps can be operated by hand or foot.
• High oil flow.
• Easy to fill and check oil level.
• Safety valve prevents overfilling the tank.
• Return oil line can be connected to oil filler hole.
PP70-1000 - for those pumps we recommend gauge AMT801 and gauge adapter AVM204. Other combinations of gauge and gauge adapter are however possible.
PP70-1000/LS201, PP70-1000/LS250 - PP70-1000 pumps are available in a pre-mounted version with 2 m or 2,5 m hydraulic hose, quick coupling (AQI7) and swivel coupling (ASE10).
|
|
Mini hydraulic pumps model PAY
With compressed air driven motor 700 bar
These mini-pumps are driven by an air-powered motor and can be connected to any supply source of compressed air. These compact low-cost pumps can operate all single-acting or double-acting hydraulic cylinders up to a max. operating pressure of 700 bar.
Features
- Pedal in neutral position - motor stands still, cylinder stands, pressure is held.
- Pedal depressed - motor starts, cylinder advances, pressure is built-up.
- Pedal pushed forward - motor stands still, pressure is released, cylinder retracts.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
