|
|
Pneumatic conveying is a core technology of Gericke since more than 60 years! Suction conveyors are very compact, easy to install and simple to operate. The suction unit with its integrated receiving hopper can be placed on feeders, mixers, vessels.
Combined with a weighing sysem, the units work as suction weigher, meaning that batches can be measured during conveying cycle.
The system operate purely pneumatically and are therefore suitable for hazardous areas too.
|
|
Features:
- easy material aspiration and dust-free loading of machines
- gentle conveying, no seperation of material mixtures
- optimum hygiene conditions
- reliable filter systems in GMP quality
- simple to install and to operate
- low energy consumption
- favorable investment- and operating costs
|
|
|
ANVER TT Series Transfer Tubes instantly provide air movement the moment compressed air is applied and their transfer speed and output flow can be infinitely adjusted by regulating the input pressure. Made from aluminum with a durable anodized finish, they come in a wide variety of bore sizes from 0.375” to 1” (9.5 to 25.4 mm) I.D., with air flows from 15 to 145 SCFM.
|
|
They exploit the principle of the Coanda effect
They were originally designed for sucking and transporting products like dust, granulates, sawdust, grit, metal shavings, but are also suitable for oil spray and welding fumes
Characterised by their low head and very high volumetric yield
They can also be used as blowers, or for cooling surfaces
Maintenance free, good filtering of the compressed air supply is recommended
Available with intake diameters from Ø 7 to Ø 50 mm
|
|
* Patented COAX® technology.
* Available with a three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow, a Pi cartridge for high performance at low feed pressure or an Xi cartridge when high flow and deep vacuum is needed.
* Substantially lower air consumption as compared to conventional ejectors.
* Modular design.
* Available with multiple connection alternatives.
* Low noise level.
* Short evacuation time.
Supplied with a vacuum gauge.
|
|
Positive Displacement Vacuum Pumps
Vacuum pump packages are recommended for the higher rates over longer distances and continuous service. They are also used on many applications where a venturi unit would be adequate but sufficient compressed air is not available. They feature a positive displacement lobe-type blower and are complete packages with motor and blower, secondary material filter on the inlet and muffler on the outlet. These units are mounted on a heavy duty, forkliftable base and are equipped with belt guards conforming to current OSHA standards. Included are a glycerin-filled vacuum gauge and a vacuum relief valve. The secondary filter protects the pump from any carryover of material from the material receiver. Cartridges are easily changed by removing the end cover. Optional differential pressure gauge and/or switch can be furnished to indicate or shut down if filter should become restricted.
|
|
|
|
|
|
With a wide range of granule receivers ranging from 1,5 to 140 dm3, Piovan is able to offer the ideal solution for all conveying requirements. Three versions of vacuum receivers are available: granule receiver entirely in stainless steel (C models), version with 3 sight glasses (SR models) and in the configuration with glass section (GR units).
Maintenance:
> Effective and rapid cleaning operations
> wide filtering surface and solid steel frame, to guarantee continuous functioning of the system with no production stop for maintenance operations or replacement of the filter
> anti-wearing materials
Design: magnetic sensor integrated in the control box and factory pre-set. A led allows the operator to monitor when the sensor is activated.
Simplified and rapid installation: The possibility to adjust at 360° the adoptor ring as well as the material and vacuum lines, not constrained one another, simplifies the installation of the receiver in line with the plant configuration.
SIMPLIFIED AND ENHANCED OPERATOR INTERFACE: Easy3System
Plug&Play: The receivers are immediately ready for operation once connected, with factory pre-set loading cycles for optimal functioning. The working status and possible alarms are signalled in a user-friendly way with bright green and yellow leds positioned on the upper part of the control box, in a visible position.
The KEYPAD permits to customise the hopper loader’s functioning, setting the conveying times, the pause time between the loading cycles, the maximum number fo unsuccessful loading cycles, the modes of filter cleaning, and the functioning of the proportional valve.
Easy3System is compatible with the previous versions.
|
|
|
|
|
|
FEEDMAX B and BS/4 Series Loaders
The FEEDMAX B and BS/4 series loaders are built for highest functionality and demanding applications. The modular design of these vacuum loaders guarantees specific adjustment to meet individual customer requirements, as well as for simple cleaning.
- Complete flexibility – Stainless steel line size reducers can be easily interchanged to maximize flexibility.
- Superior wear resistance – Pneumatically actuated cast stainless steel material and vacuum valves for highly abrasive feeding applications.
- Low Maintenance – Interchangeable mirror finish stainless steel center section offers low maintenance and allows hopper capacity to be easily changed.
- Completely dustproof – Pneumatic discharge shut-off valve design permits clean
room operation for standard loaders.
- Highest operational reliability – Dustproof and pneumatically controlled material shut-off discharge valve.
- Ergonomic design – A hinged lid without valves or hose connections offers unmatched accessibility
for simple cleaning.
- Simple cleaning – One self-locking toggle latch is easily accessible and opens towards the operator.
- Easy operation – Modular assemblies with fully accessible quick release band clamps can be easily cleaned and interchanged.
- Easily visible – Status LED`s and pluggable control cable for all network control systems.
- Reliable – Material demand via proximity sensor standard with high heat execution.
|
|
CMP-11 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
ALD130P-18F is a double diaphragm air micro pump which well suited for compressing air.
Technical Features:
1.Double diaphragm air pump.
2.Uncontaminated flow.
3.Non-metallic construction.
4.Compact size.
5.Maintaince free.
6.Can operate in any installed position.
|
|
CMP-25 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP40 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
Con-Evator , PGT Vacuum receiver
High performance, environmentally-friendly vacuum hopper loaders covering all aspects of modern conveying technology for plastic materials. The PGT series is based on the vacuum principle and gives a clean, low-noise conveying of materials. No compressed air is required because of a unique non-polluting filter cleaning system. The specially engineered blowers also ensures optimum reliability and consistency..
|
|
| ... products without technical information |
| |
|
|
|
|
Typical applications for chemistry diaphragm pumps include evacuating chemically aggressive gases from such equipment as rotary evaporators, vacuum drying cabinets and centrifugal concentrators. Chemistry diaphragm pumps from VACUUBRAND have uncompromising chemistry designs: They are very resistant to chemical vapors from inlet to exhaust, and are very tolerant of condensate. Our two-, three- and four-stage pumps also have a gas ballast valve that helps to preserve pump performance when working with condensable vapors. Pumping chambers are hermetically separated from the drive space, ensuring long lifetimes of mechanical parts. Most importantly, diaphragm pumps are oil-free, for vastly reduced service demands compared with oil-sealed pumps. They eliminate the water waste of water-jet aspirators, and the contaminated waste-oil disposal of rotary vane pumps.
- PTFE sandwich diaphragms and valves made of perfluoro elastomer or PTFE
- internal tubing and fittings made of PTFE/ETFE/ECTFE compounds
- patented new drive system for extra quiet, ultra-low-vibration operation
- exceptional diaphragm lifetimes with ultra-durable PTFE sandwich design
- head cover and clamping disc with stability core for unsurpassed long-term performance
- new sealing system provides reduced leakage rates for improved ultimate vacuum
- very long service intervals for low lifetime cost-of-ownership
- patented new valve mounting system to simplify service access
- smooth surfaces for easy cleaning
|
|
KNF diaphragm vacuum pumps for air and neutral, slightly aggressive or corrosive gases and vapours offer the right choice for many applications. Irrespective of size, the special features of the diaphragm are built into every pump: uncontaminated transfer , no pollution of the media, maintenance-free and gas tightness. Application e.g. used as a roughing pump for turbo molecular pumps.
|
|
|
|
|
|
VACUUBRAND diaphragm pumps are totally oil free, mechanical vacuum pumps. Diaphragm pumps are the efficient and environmentally friendly alternative to water jet pumps. They do not consume water and, therefore, they do not produce contaminated waste water. Diaphragm pumps can be used in a multitude of applications for vacuum generation in laboratories and process plants, such as vacuum filtration, vacuum degasing, vacuum impregnation, vacuum drying chambers, rotary evaporators, distillation, gel dryers, gas analytical systems and roughing of wide-range turbo molecular pumps.
Diaphragm pumps offer low ultimate vacuum down to 80 mbar (one-stage pumps), 9 mbar (two-stage pumps), 2 mbar (three-stage pumps) or 0.3 mbar (four-stage pumps). Optimized kinetics for minimum work and wear of the diaphragm result in high reliability, low scuffing, long life and low noise level of the diaphragm. Only selected resistant materials such as FPM (e.g. Viton® fluoroelastomers) and aluminium or PTFE compounds - depending on the version - are used for the gas and vapour contacted parts.
|
|
KNF diaphragm pumps for air and neutral, slightly aggressive, high aggressive or corrosive gases and vapours offer the right choice for many applications. Irrespective of size, the special features of the diaphragm are built into every pump: uncontaminated transfer , no pollution of the media, maintenance-free and gas tightness.
|
|
- combination of a diaphragm pump with a rotary vane pump
- for the fine-vacuum range in special applications, e.g. for aggressive gases and vapours, for evacuation of solvent recovery vapours, for pumping of vapours which are soluble in oil
- example of use: freeze drying
|
|
ILMVAC diaphragm pumps are available:
- with different materials for chemical or physical processes
- with regulated or unregulated vacuum
- with different pumping speeds and final pressures
Advantages:
- compact and space saving design
- quiet running
- long lifetime
- very easy to service
- low operating costs
Range of applications:
- for dry, oil-free applications in the rough and medium-high vacuum range
|
|
|
Welcome to the newest Line of rugged Dia-Vac® Pumps! The High Performance double head Dia-Vac® pump will provide greater response in the most demanding applications!!! These durable pumps are available with General purpose, TEFC, Air Driven, Explosion proof UL/CSA Div I Class I group C and D, and Flameproof ATEX certified EEXD IIC T4 IP65 motor options. Wetted parts are available with aluminum or 316 Stainless steel for added corrosion resistance. Maximum performance: 0-29.5” HG, 0-84 LPM, 0-60 PSIG. You can count on the new high performance Dia-Vac to pass you gas with confidence!!
|
|
The D-LAB membrane pumps with their chemically resistant Teflon heads, diaphragms and Kalrez valves offer the chemical or pharmaceutical laboratory user a wide range of choice, either used as stand-alone pumps or as part of a sophisticated system.
The one head, 100 mbar ultimate vacuum pumps are suitable for use with drying equipment or for replacing water-jet pumps, whilst the two head, 8 mbar ultimate vacuum pumps are suitable for rotary evaporation, gas transfer and a wide range of medium vacuum applications.
The pumps are designed so that they can be upgraded by the addition of a range of accessories. The accessories are supplied with all the required connections and no special tools are needed to fit them.
|
|
CMP-17L Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-32 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-18 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid and can against high pressure.
Technical Features:
1.High system pressure.
2.Non-metallic construction.
3.Compact size.
4.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
5. Uncontaminated flow.
|
|
Dry and Oil-Free!
The Ideal Backing Pump for Pfeiffer Vacuum Turbopumps.
Dry and oil-free diaphragm pumps with a pumping speed of 6 to 160 l/min. They are ideally suitable for being used as a backing pump for Pfeiffer Vacuum turbopumps and for integration into compact systems.
|
|
|
|
see the results for the following category : 
