|
|
QUICK-RELEASE ERS
* Connecting of air tools, blowguns, air automation equipment.
- Paint and body shop.
- Automotive and aircraft assembly lines.
- Any type of industry in contact with finished products (i.e. furniture, appliances, computers, cars).
* Non scratch finished surfaces
Perfect single cylinder construction of high impact composite with no external metallic parts. Special non scratching clamping system including stress relief
* Light weight
The 6 mm coupling weight only 125 g and the 8 mm coupling only 140 g.
These characteristics, highly appreciated by the operators on the assembly lines, help to prevent carpal tunnel problems.
* Fully automatic
Thanks to the patented safety push-button, it can be connected and disconnected with one hand, for quick and effortless changing.
* Long lasting airtightness
Firm embedding of plug into socket and long guide path for the connecting plug on hardened and ground bearing surfaces provide long life and reliable airtightness.
|
|
NC Clamping Ring Fittings for 24°DIN-conus connections
- made of stainless steel AISI 316ti
- fits for all 24°DIN-conus connections
- from 6 to 25mm
- reduced installations torgue by silver plated inside of NC-nut
- pre-assembly in one step
- certified by DVGW for gas application
- higher nominal pressure possible (see technical information)
- high vibration resistance
|
|
Ball Swivel Fittings:
Ball Swivel Fittings are used between the tool and air supply hose to eliminate kinking and twisting. Ball Swivels provide a more natural range of motion than the "traditional" air tool swivel fitting. In addition to providing a greater bend angle (20 degrees to 25 degrees depending on size) and flow capacity than ball swivels made by other manufacturers., these fittings will increase tool maneuverability and production capacity, minimize user fatigue, extend the life of the hose and minimize cost. Made of hardened steel with nickel-plated barbs.
Coilhose Pneumatics offers the following lines of Fittings:
COILOCK Push-to-Connect Fittings
Metric COILOCK Push-to-Connect Fittings
Speed Controls
Poly-Tube Fittings
Brass Hose Fittings
Nylon Hose Fittings
Ball Swivel Fittings
Ball Swivel Connectors
Orbital Swivel Fittings
Brass Pipe Fittings
|
|
Camozzi offers a large selection of fittings and accessories suitable for a wide range of applications.
Universal fittings, super-rapid fittings, quick release couplings and accessories are available in different dimensions from M5 to G1/2. Our fittings range includes the patented and longstanding 'Sprint' system that guarantees tightening and facilitates the repeated removal and reassembly of the fitting.
|
|
This series of fittings is called "compression" because realizing the clamping of the tube and the tightness between the tube and the body-fitting, by means of the compression of the ring called "olive".
The seats of the fittings, the olives and nuts are dimensioned in conformity with the DIN standards.
Connection tubes:
Tubes made in copper, steel, iron, aluminium, brass, etc.
With an inside support bush can be used also for plastic material such as PA11, NYLON PA 6, etc.
Fluids:
Water, oils, compressed air, fluids in general for the hydraulic, pneumatic and oildynamic plants etc.
Fittings are available in the following sizes:
tube from 4 up to 22;
thread of 1/8 to 1".
|
|
INFINITY
Brass push-in fittings and aluminum tubes.
Easiness and quickness of assembling.
Special patented fittings for outlet.
Diameters available: 20, 25, 32, 40, 50, 63 mm
Compatible Fluids: Compressed air, Inert gases and Vacuum
Minimum temperature: -20°C
Maximim temperature 80°C
Minimum pressure: -0.99 bar
Maximum pressure: 15 bar
UV resistant. Fireproof. Anticorrosive coating.
"MOVE THE AIR POWER"
|
|
Air Logic manufactures a comprehensive line of nylon and polypropylene plastic fittings; the polypropylene fittings ar more chemically resistant than our standard nylon fittings. Polypropylene also provides more dimensional stability.
The fittings include Barbed Crosses, Elbows, Tees, and Unions. Barbs are available for 1/16", 1/8", or .170" I.D. tubing. The nylon fittings can be provided in black or white; the polypropylene fittings are gray.
|
|
Brass Hose Fittings:
Coilhose manufactures brass fittings to exacting tolerances and strict quality control standards. Made of heavy duty, solid brass barb fittings with properly crimped ferrules or clamps can be used with Flexee, nitrile, rubber and thermoplastic hose. Coilhose reusuable Hose Fittings are ideal for quick, easy yet permanent in-field installations. Reusable fittings can be used with nitrile and rubber hose.
Coilhose Pneumatics offers the following lines of Fittings:
COILOCK Push-to-Connect Fittings
Metric COILOCK Push-to-Connect Fittings
Speed Controls
Poly-Tube Fittings
Brass Hose Fittings
Nylon Hose Fittings
Ball Swivel Fittings
Ball Swivel Connectors
Orbital Swivel Fittings
Brass Pipe Fittings
|
|
|
|
|
|
Description: Beswick compression fittings (for 1/16", 1/8" and NOW 1/4" OD Tubing) give you the ability to operate at high pressures and temperatures while maintaining a small envelope. How? Beswick compression fittings are provided with miniature M3, 10-32, M5 and 1/4-28 threads. You will save valuable space by using these compression fittings instead of bulky 1/8" NPT threaded compression fittings. Additionally, our compression fittings include Beswick's captured O-ring face seal for a leak-tight seal at the threaded end of the fitting. We offer straight, elbow and tee configurations along with the option of special O-ring and body materials to combat corrosive fluids and high temperatures.
Beswick Engineering designs and manufactures high-performance miniature fluid power components, such as: fittings, valves, quick disconnects, pressure regulators/gauges, cylinders, filters, orifices, shock absorbers, pressure electric switches, tubing, etc. Applications include: medical and dental equipment, instruments, laboratory equipment, semiconductor manufacturing equipment, aerospace equipment, packaging machinery, industrial robots and many more.
|
|
Wide choice of automatic push-in fittings.
Four different lines available:
50000 serie is made in brass - metric thread
57000 serie is made in brass - metric thread with metal collet.
87-88000 serie is made in brass - NPT-NPTF thread
55000 serie in technopolymery.
60000 line in stainless steel.
All three lines offers multiple combination of sizes, figures and threads.
Main advantage is the gripper which allows a perfect clamping on all kind of tubes.
Almost 1000 different items ready in stock for prompt delivery.
Suitable for all kind of vacuum or compressed air connection
Fittings are available in the following sizes:
tube from 3 up to 14;
US tube from 1/8" - 1/2"
thread of M5 up to 1/2"
|
|
Camozzi offers a large selection of fittings and accessories suitable for a wide range of applications.
Universal fittings, super-rapid fittings, quick release couplings and accessories are available in different dimensions from M5 to G1/2. Our fittings range includes the patented and longstanding 'Sprint' system that guarantees tightening and facilitates the repeated removal and reassembly of the fitting.
|
|
The "quick couplings" of the 1000 series have been studied into their dimensional structure (thickness and dimensions) as well as their main characteristic (the fitting cone with its unique barb shape) in order to satisfy the requirements of the field of work, that is pneumatic plant.
The compression cone with its unique barb shape ensures a good grip on the tube even if the nut is tightened by hand.
In this range of remarkable interest are the fittings called "Swivel", they satisfy the most varied and complicated assembly requirements as it is possible to turn the bodies at 360 degrees compared to the bases.
Fittings are available in the following size:
tube from 4/2,7 to up 15/12,5;
thread of 1/8 to 1/2.
Connections tube:
Nylon PA6, PA11, Polyurethane, Polyethylene, Braided PVC.
Fluids:
Compressed air. Fluids and liquids at low pressure compatible with the connection
|
|
60000 serie is automatic push-in line in stainless steel.
All components, including gripper, are in stainless steel Aisi 316L, which allows long-life performances. The o-ring is in FPM FDA approved.
This is most suitable line for aggressive fluids or application in extreme environments like chemical, pharmaceutical, naval, medical. Particularely used in Food application.
Fittings are available in the following sizes:
tube from 4 up to 12;
thread of M5 to 1/2.
|
|
Features :
Safety :
Recoil free 2-stage coupling
Complies with safety standard ISO 4414, EN 983
SV type approved by "Det Norske Veritas"
Technical:
Easy grip release ring
Applicable in rough conditions
Excellent sealing performance
Flowrate at pressure drop of 0.5 bar (7 psi):
2'500 l/min (88 CFM)
|
|
Solid-metal push-in fitting with nickel and chrome plated surface. High corrosion resistance (CRC3) and chemical resistance with approval for use in the food and packaging industry. For pneumatic applications with a temperature range up to 150° C (at 6 bar), and a pressure range up to 16 bar. Versatile thanks to antistatic and flame retardant characteristics. Outside tubing diameters of 4, 6, 8, 10, and 12 mm with M5, M7 and G1/8 to G1/2 connecting thread.
Recommended tubing:
Antistatic: PUN-CM
Flame-retardant: PUN-V0
Heat-resistant: PFAN
Food zone 1: PUN-H
Resistant to cleaning agents / food zone 2: PLN
|
|
|
Legris brass compression fittings are compact and easy to assemble, provide excellent sealing qualities, and are suitable for use with various types of tubing. Excellent pressure (up to 14 bar nominal, 36 bar max) and temperature (-75C° to +120°C) performance.
|
|
Product Specifications
Temperature Range Brass Sleeve -40 ° F to 325° F
Material of Shapes (Elbow, Tees) Brass CA 377
|
|
|
|
|
|
General Description
The John Guest Water Trap Tee Convertor is a simple and convenient way of converting a standard John Guest 28mm Tee, Part No. PM0228E, to a Water Trap Tee.
When fitted, it will stop condensed water within the Air Ring Main Circuit from entering the vertical take off spurs.
It is important that the Ring Main has been installed with the correct fall and water drain points are regularly vented.
To Assemble
Use either John Guest 28mm Nylon Pipe Part No. PA-RM2823-3M-10B or standard 28mm copper pipe. The pipe should be cut squarely and be free of burrs.
The shorter spigot should be pressed into the pipe. When using copper pipe the fit will be loose, this will not affect the function.
The Pipe and Convertor should now be firmly inserted into the centre port of the Tee. Full insertion is required to correctly locate the Convertor and provide a water tight seal.
By turning the screw cap by approximately 1/4 turn (2 clicks can be heard) the collet is locked in place and further compression of the 'o' ring on the pipe is achieved.
Materials of Construction
This fitting is made of the following components:-
* The body is produced in brass
* The 'O'Ring is nitrile rubber
|
|
- Aluminium pipe
- Diameters 16.5 to 100 mm (1/2'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
PIPES AND FITTINGS FOR COMPRESSED AIR RINGMAINS
System PVR (PVC alloy) and Concept ALR (aluminium) offer an easy to use, modular system for installing air networks.
|
|
|
The LF 3600 range, in nickel plated brass, is designed to convey fluids in moderately agressive environments or for food applications. The nickel plated brass components and FKM seals conform to stringent FDA requirements. Vacuum capability, working pressure up to 20 bar, working temperature from -20° to +120°C, for use with all types of calibrated tubing.
|
|
Imperial Push to connect fittings (NPT /Inch)
The PN is our “Automatic push-in fitting line” with NPT threads and INCH tube diameters. This line enables several quick connections and disconnections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by simple hand movement.
The connection and the fitting tightness are made possible by the presence of a stainless steeI gripper and an ORING inside of the fitting so that once the tube is inserted to the bottom of the fitting, the stainless steel collet grips onto it and prevents it from being released. The tube disconnection is then made possible by pushing onto the outer metal ring called the release ring.
All PN fittings are brass nickel-plated.
|
|
Features and Benefits ...
- Compact Design: requires very little space, allowing neater control circuits and smaller equipment
- Lightweight: composite glass reinforced Nylon body keeps the fitting weight to a minimum
- Ease of Operation: connecting and disconnecting is quick and easy
- Ease of Installation: the internal hex allows easy installation of straight fittings even in hard to reach places
- Wide Selection: body configurations for most tubing sizes to meet all application requirements are available
- Ready to Use Threads: tapered threads are supplied with factory applied sealant and parallel threads include a captive "O" ring seal to assure leak free connections
- Contemporary Appearance: the modern and clean look of these fittings will enhance the overall appearance of the machine or equipment
|
|
|
Legris function fittings allow you to exert even greater control over your pneumatic installation. Compact, reliable and easy to install, these fittings can be used in various applications, including: food and beverage manufacturing, automotive manufacturing, printing and textile industries.
|
|
POLYMER PUSH FITTINGS CNP
New-generation polymer design : lightweight, small-sized, rugged, and easy to fit.
Broad range with a large selection of shapes, threads and diameters.
Smaller: polymer design and short tapered or parallel threads with seals.
PUSH FITTINGS METAL CNM
Nickel-plated brass design to resist impacts and the toughest conditions.
Straight screw machined couplings, brass elbows and tee pieces.
Precision machined.
PUSH FITTINGS INOX CNX
Stainless steel design : suitable for aggressive environments and food processing.
Swivelling parallel elbows and tee pieces.
|
|
|
The LF 3000 range of durable plastic fittings is ideal for pneumatic installations, modern design and compact. Vacuum capability (28" Hg), working pressure up to 20 bar, working temperature from -20°C to +80°C, for use with all types of calibrated plastic tubing.
|
|
Push to connect fittings in composite (POM)
Our automatic MB fittings are made of a polymer belonging to the acetal resins. The technical features of this polymer make this fitting line stiff, corrosion and fatigue resistent, and allow for dimensional stability, all characteristics necessary to bridge the gap between metal fittings and an ordinary plastic fitting line.
The functioning principle of the MB is the same as our Push-in’s therefore enabling quick, manual connection and disconnection with calibrated hoses at any stage of the pneumatic circuit. The inner Oring and the stainless steel grip allow for the tube to be held captive and for the pneumatic tightness. When the tube is pushed to the bottom of the fitting, the stainless steel collet grips onto it and the tube is held captive. It is then enough to press on the release ring to set the tube free from the fitting.
|
|
|
Legris pressure reducer fittings save energy by optimising the pressure required by cylinders in your application. Legris soft start fittings allow air pressure to gradually increase, preventing injury to users or components.
|
|
|
Legris AISI 316L stainless steel compression fittings are designed for use with corrosive fluids or in aggressive environments, such as chemical manufacturing or food and beverage processing. Compact and highly chemical resistant, these compression fittings are suitable for use with both plastic and metal tubing.
|
|
|
The LF 3800 range, with an all stainless steel construction, is designed to convey fluids in agressive environments for numerous applications such as: food manufacturing, chemical production, and packaging. Body and sub-bases are made of AISI 316L stainless steel with FKM seals. Vacuum capability up to 28" Hg, working pressure up to 20 bar, working temperature from -20°C to +120°C, for use with all types of calibrated plastic tubing.
|
|
|
|
