|
|
NC Clamping Ring Fittings for 24°DIN-conus connections
- made of stainless steel AISI 316ti
- fits for all 24°DIN-conus connections
- from 6 to 25mm
- reduced installations torgue by silver plated inside of NC-nut
- pre-assembly in one step
- certified by DVGW for gas application
- higher nominal pressure possible (see technical information)
- high vibration resistance
|
|
60000 serie is automatic push-in line in stainless steel.
All components, including gripper, are in stainless steel Aisi 316L, which allows long-life performances. The o-ring is in FPM FDA approved.
This is most suitable line for aggressive fluids or application in extreme environments like chemical, pharmaceutical, naval, medical. Particularely used in Food application.
Fittings are available in the following sizes:
tube from 4 up to 12;
thread of M5 to 1/2.
|
|
Features :
Safety :
Recoil free 2-stage coupling
Complies with safety standard ISO 4414, EN 983
SV type approved by "Det Norske Veritas"
Technical:
Easy grip release ring
Applicable in rough conditions
Excellent sealing performance
Flowrate at pressure drop of 0.5 bar (7 psi):
2'500 l/min (88 CFM)
|
|
|
Legris AISI 316L stainless steel compression fittings are designed for use with corrosive fluids or in aggressive environments, such as chemical manufacturing or food and beverage processing. Compact and highly chemical resistant, these compression fittings are suitable for use with both plastic and metal tubing.
|
|
|
The LF 3800 range, with an all stainless steel construction, is designed to convey fluids in agressive environments for numerous applications such as: food manufacturing, chemical production, and packaging. Body and sub-bases are made of AISI 316L stainless steel with FKM seals. Vacuum capability up to 28" Hg, working pressure up to 20 bar, working temperature from -20°C to +120°C, for use with all types of calibrated plastic tubing.
|
|
ush to connect fittings in stainless steel
MX is our new stainless steel fittings line. Suitable for all those applications where brass nickel-plated and acetal fittings are banned, the new AISI 316L fitting is conceived to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food and chemical industries.
MX is standardly equipped with FPM seals that will assure endurance at the highest temperatures.
|
|
Prestolok stainless
Description:
New range of instantaneous fittings 100% stainless with seal FKM (Viton )
Advantages:
- Large variety of forms and connection
- Parallel Tapping with captive O-ring seal
- Easy Assembly: right agreements with 6 sides internal
Applications:
- Particularly recommended for the aggressive fluids and the severe environments: chemistry, petrochemistry, pharmacy, food.
|
|
|
|
|
|
The basic bite type fitting was first developed in Europe in the early 1930s.
The Ferulok fitting was later developed by Parker-Hannifin and introduced to the U.S. market in the mid-1940s. The Ferulok fitting design utilizes a combination of proven European features, coupled with many innovative product improvements instituted by Parker Hannifin.
Today, the Ferulok fitting design and performance capabilities far exceed the strict requirements of SAE and military standards. The Ferulok fitting is a flareless fitting that consists of a body, a one-piece precision machined ferrule, and a nut. On assembly, the ferrule "bites" into the outer surface of the tube with sufficient strength to hold the tube against pressure, without significant distortion of the inside tube diameter. The ferrule also forms a pressure seal against the fitting body. Ferulok fittings allow the fitting assembler to visually inspect the bite quality, thus significantly minimizing the risk of improper assembly and related service problems. Ferulok fittings are especially suitable for use with tube wall thicknesses ranging from medium to extra heavy.
Ferulok’s robust construction and proven sealing characteristics have gained it worldwide popularity in diverse markets and applications. Ferulok fittings are routinely used in markets, such as: Machine tools, chemical, military, oil refineries, paper making, thermoplastics processing, etc.
|
|
TECVAL two-ferrule compression fittings offer an anti-leaking shut-off and avoid twisting the piping. The two-ferrule system guarantees a correct seal, saving material variations as well as different pipe thicknesses and hardnesses.
They can be easily assembled without any especial tool.
Made in several alloys.
|
|
|
Stainless steel double ring fittings and valves. Unions, tees, crosses, elbows, needle valves, regulation valves and check valves
|
|
The Jaw type couplings from Lovejoy are offered in the industry’s largest variety of stock bore/keyway combinations. These coupling require no lubrication and provide highly reliable service for light, medium, and heavy-duty electrical motor and internal combustion power transmission applications.
Applications include power transmission to industrial equipment such as pumps, gearboxes, compressors, blowers, mixers, and conveyors. Lovejoy’s standard bore program covers AGMA, SAE, and DIN bore/keyway and spline bore combinations. The Lovejoy’s Jaw type coupling is available in a variety of metal hub and insert materials. Hubs are offered in sintered metal, aluminum, bronze, steel, stainless steel, and ductile iron.
|
|
|
|
|
|
ETP Transmission AB is specialized in development and manufacturing of high precision hydraulic locking devices.
A new hydraulic hub-shaft connection assortment of the more common ETP-Products are now introduced in stainless steel.
The demand from the food and process industries is increasing for stainless steel hub-shaft connections, surface coatings and plating are no longer sufficient.
The three most common types of the ETP-Products, ETP-CLASSIC, ETP-MINI and ETP-EXPRESS, are now available as standard items.
ETP-CLASSIC Type R, recommended for all normal needs.
For shaft sizes from 15 to 50 mm.
ETP-MINI Type R, for small shafts with sizes from 6 to 14 mm.
ETP-EXPRESS Type R, especially suitable for applications where adjustments
of the hub are made frequently or because of the need for radial access.
For shaft sizes from 15 to 50 mm
All surfaces exposed to the environment are made of stainless steel. In for example food processing this meets essential requirements.
Choose, for your application, the optimum hub-shaft connection in stainless steel
from ETP.
|
|
AXIAL EXPANSION JOINTS
Flanged or with welding ends as per customer request.
They start from ND 15 to ND 3000, normally made with Carbon Steel or Stainless Steel AISI 321, AISI 316L
AISI 310 and for customized designs with other materials
as MONEL, HASTELLOY, INCONEL, Etc
|
|
BALANCED EXPANSION JOINTS
Flanged or with welding ends as per customer request.
They start from ND 15 to ND 3000, normally made with Carbon Steel or Stainless Steel AISI 321, AISI 316L, AISI 310 and for customized designs with other materials as MONEL, HASTELLOY, INCONEL, Etc
|
|
Standard series of HYDRA® angular and lateral expansion joints
* Compensation of flat and 3-dimensional systems
* Up to DN 1000 and for higher pressures
* With flanges or weld ends
* With patented bracing
|
|
STENFLEX steel expansion joints have had a proven track record in flexible pipe connection applications for decades. Even under extreme operating conditions. Our wide product range is able to meet varying industry application requirements, media and nominal widths as encountered in the engineering industry, motor, component and ship construction and building technology.
You will benefit from a product with:
- motion compensation
- expansion compensation
- tension reduction
- anti-vibration and noise damping properties
|
|
Many applications require corrosionresistant
universal joints to assure
sanitation or to avoid premature
oxidation or deterioration. Curtis stainless
steel U-joints are particularly important, for
example, to industries that use food processing
equipment, and for machinery that comes in
contact with corrosive chemicals or is exposed
to water for long periods. Furnace applications
also benefit from stainless steel, which better
withstands high temperatures and other
environmental extremes.
Curtis offers:
• 14 standard O.D. sizes
• 3/8" to 4" diameter
• 303 grade stainless steel in stock
• 304, 316 and other grades available by
special order
For assistance in ordering your universal
joints, please refer to the Curtis How to Order
instructions on page 19. To check the static
torque rating, weight and other characteristics
of Standard Curtis Stainless Steel joints, please
refer to the Selection Guide for single joints
on page 13.
|
|
|
|
