|
|
HSGDA DXF FILES
Humphrey Guided Block Cylinders are heavy duty air cylinders with precision guide shafts that are integrated into a unique extruded aluminum body. Guided Block Cylinders provide rigid movement of substantial loads, plus they have the strength to withstand significant side loading. The rectangular design saves space and provides a wide selection of mounting, porting and sensor switch options. Both are available in 8 bore sizes with stokes of up to 8 inches in length. Hard chrome plated piston rods are standard on 12 to 25 mm bore models. Hard chrome plated hard steel piston rods are standard on 32 to 63 mm bore models.
|
|
GPC Dia. 10 with 63mm.
Element of the range Easy-2-Combines.
Race 10 with 200mm. Exhausted stage or ball bush. Is appropriate for precise movements with high side loads. Easy adjustment length of race.
4 versions available.
|
|
Series OCT. Dia. 10 with 25mm. Threaded connections or Rapids prefabricated
Piston octagonal = profit of push de17% and stem antirotation.
Compact construction, shaped tube aluminum, 1 only form of mediums and detector for all the diameters.
|
|
Pressure Moves Ahead
With AIRTEC cylinders, machines are put into motion. Manufactured according to International Standards, these products will not let you down.
Round cylinders according to ISO 6432
Tube cylinders according to ISO 6431 / VDMA 24562
Compact cylinders
Stainless steel cylinders
Cylinder-valve combinations
Linear slides for pneumatic cylinders
Customer specific solutions
|
|
|
Air cylinders have always been an integral part of the Clippard Minimatic line. Over the years Clippard has responded to requests from cylinder users to provide additional sizes of air cylinders and auxiliary support products. While competitively priced, these products maintain the Clippard standard for quality and reliability that has been the industry standard for many years.
|
|
Pneumatic Actuators
Standard actuator - air opens, spring closes
maximum air pressure for operation 6.0 bar ü
Actuator coating outside - Epoxy resin
Available options - on request only:
* Actuator - spring opens, air closes
* Actuator - cleaned and degreased for oxygen service
* Pneumatic actuator with override handwheel
Ambient temperture limit: -20°C / -4°F (253K) up to +80°C / 176°F (353K)
|
|
HJDAD
Double Rod end. Wide range of bore sizes 1/2" to 4". Unique body allows sensor switches to be mouted on 3 different sides when magnet type is required. Four different sensor switches available including hall effect or reed types, and indicator light (LED). Other options include bumpers, viton seals, male rod thread or no rod thread, foot mount, and flange mount.
|
|
TWC Dia. 6 with 32mm, bend standard 10 with 100mm.
High loads possible, anti-torsion, possible locking end of the road.
Design flat, easy to go up, many possibilities of fixing of the sensors.
Excel thorough obstruction ratio/.
|
|
I -122I -128 I -326I -332I -250I -254I -424I -968
Page
I -1090
Extend Extend Extend Extend Extend
Retract Retract Retract Retract
Remarks
8 to 80
20 to 40 20 to 40 10 to 25 20 to 40 20 to 40
40 to 100 40 to 100
125 to 250
Bore size (mm)
Series/model
Medium bore size cylinder Medium bore size cylinder Linear slide cylinder Medium bore size cylinder Medium bore size cylinder Round shaped medium bore size cylinder Round shaped medium bore size cylinder Large bore size cylinder Guided cylinder
Stroke adjustable
M
L
S
CMK2-P CMK2-R LCY-R SCA2-P SCA2-R SCM-P SCM-R SCS-P ST - P
|
|
This comprehensive range of pneumatic actuators includes conventional ISO and VDMA cylinders, guide units, slide cylinders, compact and clamp cylinders.
|
|
|
|
|
|
ISO/VDMA Series Metric Standard Interchangeable Cylinder
The ISO/VDMA Series is an aluminum body air cylinder line that is designed to meet all your international cylinder requirements. In fact, our ISO/VDMA Series cylinders are designed to meet the requirements of ISO 6431 (International) and VDMA 24562 (Germany). The combination of lightweight aluminum construction and proven reliability makes our ISO/VDMA Series the Superior Interchangeable metric, international standard air cylinder line.
GeoMetric® ISO/VDMA Cylinder
The GeoMetric® Series conforms to the following cylinder specifications: VDMA 24562, DIN/ISO 6431, and ISO/FDIS 15552. One of the most desirable features of the cylinder line is the dual switch/sensor groove design that is a standard offering on all GeoMetric®cylinders. The dual groove design offers great flexibility when mounting switches and sensors to the cylinders. One groove is a traditional round groove and the other is what we call the CombiGroove®. The CombiGroove® is a unique design that will accept round and angular switches/sensors.
|
|
Conforming to ISO 6431, VDMA 24562 and NFE 49-003-1 standards. Seven ranges including SMART cylinder with stainless steel versions for all requirements. Double and single acting models with bore sizes from 32-200mm. Comprehensive choice of mountings.
Norgren is proud to announce the launch of its new Roundline Plus repairable cylinder, and the F Series Plus flat cylinder full product ranges. These products are fully interchangeable with competitor products, and very aggresively priced. Visit www.trynorgren.com for a FREE sample.
|
|
P1D ISO PNEUMATIC CYLINDER
General Construction: Anodized aluminum heads, caps and profiled cylinder body for 32-125mm bores. Anodized aluminum round body and steel tie rods for 160-200mm bores.
Versions: Standard, Removable Gland and Clean (IP65)
Standards: ISO 6431, ISO/DIS 15552, VDMA24562, AFNOR
Bore Sizes: 32, 40, 50, 63, 80, 100, 125, 160 and 200mm
Strokes: Available in any practical stroke length
Piston Rods: 1240mm, case-hardened and chrome plated steel (standard)
Piston Rod Ends: 2 standard (male and female), specials to order
Single or double piston rod ends available
Cylinder Mounting Styles: 16 standard
Operating Medium: pneumatic (air), 10 Bar (145 psi)
Standard Fluid: Dry, filtered air
Standard Operating Temperature: -20C to + 80C (-4F to + 176F)
Optional High Temperature Option: -10C to + 121C (+14F to + 250F)
Ports: BSPP standard, other porting styles (NPTF, BSPT, etc.) available
|
|
|
A full line of pneumatic cylinders according to ISO 6431-VDMA 24562 as well as comprehensive accessories are also included in ROSS EUROPA's offering. Do not hesitate to contact us for further info.
|
|
# Minicylinders ISO 6432
# Fixing elements for minicylinders ISO 6432
# Cartridge cylinders
# Round cylinders
# Fixing elements for round cylinders
# Cylinders ISO 6431 VDMA
# Mounting KIT for cylinders ISO 6431 VDMA
# Fixing elements for cylinders ISO 6431 VDMA
# Guiding units
# Compact cylinders
# Mounting KIT for compact cylinders
# Fixing elements for compact cylinders UNITOP
# Short stroke cylinders
|
|
Linear: Basic Air Cylinders
Basic linear air cylinders are used to provide straight-line, in/out linear movement for a variety of applications. Basic air cylinders are available as single-acting and double-acting with single or double rod and non-rotating models.
Body styles include crimped, round, or tie rod. Single-acting cylinders develop thrust in one direction and have lower air consumption compared with the equivalent size of double-acting cylinders. With a double-acting cylinder, air pressure may be alternately applied to provide force in both directions.
|
|
GeoSlide Series Guide Unit
The GeoSlide guide units utilizes Numatics GeoMetric ISO 6431 VDMA cylinders. The FHG & FHK series offers high load carrying capabilities in a metric package.
Features:
Bore sizes range from 32mm to 100mm.
Strokes up to 500mm.
Linear ball or bronze bushings option.
Available in a "U" style body.
LCX Series Linear Slide
The LCX Series linear slide combines cost-effectiveness with proven dependability. An economical alternative with greater load carrying capabilities.
Features:
Low Cost
High Load Capability
Stainless Steel Shafts Available
Engineered Plastic Polymer Bearing
Available in 3 Bore Sizes
|
|
Jack meeting the standard ISO 24562
Dia. 32 with 250mm.
Complete range.
Tie jack TRB, shaped PRA and PRB, specific jack agroalimentary ICL.
|
|
A space saving and guided cylinder with no equal. With a sealing system
unlike any other and endless possibilities including true synchronization
of two or more cylinders the ZR is worth a look.
The answer for dirty and dusty environments.
Available with slide or roller guide
Extremely low leakage
Smooth linear movement
High durability and operational reliability
Deliverable with a brake and encoder
Integrated valves if required
|
|
Stainless Steel Cylinders
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
|
|
Metric cylinders are standard cylinders that are available in 3 duty types:
Standard Duty
Our most space efficient duty. Short rod bearing and thin piston design. Available as single or double rod end.
Intermediate Duty (Half Husky®)
A combination of our standard and Heavy duty. long rod bearing and thin piston, designed for medium duty service. Available as single or double rod end.
Heavy Duty
Longer rod bearing plus longer piston. Designed for heavy-duty services. Available as single or double rod end.
Metric Options
Metric Accessories
|
|
|
Tie Rod Cylinders feature the patented Enersorb® piston which provides exceptionally low breakaway, high energy absorption and reduced noise output. The floating bearing design allows for minor misalignment and surperior wear characteristics.
|
|
NOTES:
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1' to 'C dimension.
2. Switch bracket mounts by strap to cylinder; place as required tor access and signal phasing
|
|
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1" to 'C dimension
2. Switch bracket mounts to tie rod place as required for access and signal phasing.
|
|
Inflated with air or a fluid (water, oil, glycol...) depending on the application, PRONAL flexible lifting bags are pneumatic components which perform mechanical functions such as pushing, squeezing, guiding, clamping, blocking, damping, lifting, moving...
They are easy to incorporate within mechanical systems and are used in presses, moulds, conveyors, handling robots, lifting tables...
Advantages :
- thin when empty,
- compact,
- uniform lifting power
- very easy to adapt,
- high lifting force.
A highly diversified range of products
- standard square shape (100 to 1,000 mm in length), single or multi-stage, inflation pressure up to 7 bar (12 models),
- customized rectangular or curved shape, all sizes,
- multiple accessories which can be adapted to the environment.
Made from elastomer-coated fabrics, flexible lifting bags are vacuum vulcanised at a temperature of 140°C.
|
|
More reliability, more possibilities, more than just standard: modular round cylinder DSNU. A wide variety of variants and mounting options: the best solution for every application, both technically and economically.
• Diameters 8 ... 63 mm
• Stroke lengths 10 ... 500 mm
• X-strokes
• Standard types available from stock
|
|
Twist Clamp Cylinders
Combines linear and 90-degree rotary motion with an internal pin/cam mechanism.
Rotary action moves a clamping arm away from the workpiece, allowing for easy loading and unloading of parts.
|
|
|
|
