|
|
Hole Punch Cylinders
Designed to punch millions of holes in plastic or other thin sheet materials 2 to 3 mils thick, the long-life BIMBA Pneumatic Hole Puncher will give you more cycles per penny.
The hardened steel cutter with ground razor sharp edges is an integral part of the cylinder. A small air jet ejects the slugs from the cutter preventing slug build up, and Elastomer Bumpers insure cushion quiet operation.
Less than 1" in diameter, several cylinders can be closely mounted. Available in seven hole cutter sizes from 1 / 4 " to 5 / 8".
This stainless steel body, single acting spring return cylinder has a 3 / 4" bore and 1" stroke. A nickel plated steel rod guide is threaded for easy nose mounting, and a 1 / 8" NPT air inlet is conveniently located in the rear head.
Prelubricated with HT-99, the cylinder can be operated with ordinary shop air at pressures up to 250 psi.
|
|
MRS Cylinders
* The Bimba MRS® Magnetic Reed Switch Air Cylinders are specifically designed to operate Bimba position sensing switches to actuate programmable controllers, relays, solenoids, timers, or any other electrically operated equipment.
* MRS cylinders have an additional groove in the piston to accommodate a magnet. They differ from the Moption because they combine features of the "Z" line with Original Line construction. Type 303 stainless steel rods are standard.
* Options at no additional charge include Magnalube G, no thread, and switch track for standard reed switches.
* Bore sizes available are 9/16", 3/4", 1-1/16", 1-1/4", 1-1/2", 1-3/4", 2", and 2-1/2".
|
|
69-032/090-F
GENERAL CHARACTERISTICS
type of construction: with tie-rods
operation: double-acting
materials: AL tube and endcovers - NBR seals - other cementated steel
type of mounting: by means of holes in the body
type of mounting: any
Operating temperature: 0° + 50° C (with dry air -20°C)
standard rotation: 90° - 180° (others on request)
PNEUMATIC DATA
operating pressure: 0,5 -M0 bar
Fluid: filtered air, without lubrication
|
|
Stopper Cylinders
EF1 Cylinder was modified for a conveyor stopping application.
Featuring a heavy-duty mounting, the cylinder's rod/bearing design was developed to withstand side impact loading.
Stroke lengths: 15, 20, 25mm.
Max Side Load: 12, 11, 10lb.
|
|
TORK-MATE - Pneumatic Actuators - 890 Series
The Tork-Mate 890 series extended life actuators are ideal for the operation of 90° turn devices such as butterfly valves, ball valves, plug valves, damper valves and other devices. Tork-Mate pneumatic actuators have features that are unique, providing many benefits to the user looking for worry-free service.
The Tork-Mate 890 series actuators feature pinion travel stops that allow a full /-10° of valve travel adjustment. As an option, extended stroke adjustment screws can be added for inexpensive throttling applications.
Special piston seals provide greatly extended life compared to standard O-ring actuators. All other bearings, seals and components have been engineered to provide superior and extended service lives.
|
|
|
|
|
|
Turn-Dex is a rotary actuator with an internal unidirectional clutch. The output shaft rotates in one direction only and remains at end of stroke while the actuator is reversed. Turn-Dex is available in two series: the Comp-Act, incorporating the Comp-Act actuator and the Turn-Act, incorporating the Turn-Act actuator.
Applications Include:
Turntable Work Stations
Drive Conveyor Rollers or Belts
Drive Material Feed Rollers
Ratchet Type Drive
Sheet Feed Material From a Stack
Perstalsis Pump Drive
Low Speed High Torque Motor
Product Mixing
APPLICATION CONSIDERATIONS:
Overrun: The output shaft can be manually rotated only in its drive direction. Large loads may coast after the actuator has stopped. The output shaft cannot be reverse rotated- Forcing it backwards could damage the Turn-Dex.
Accurate & Repeatabte Positioning: Due to the overrun nature of the clutch external stops, brakes, ro«er and detents or shot-pins is required for accurate and repeatable positioning.
Special Options: Turn-Act will provide customized units to fit your specific application needs. Modifications include special shafting, special mounts, dutch housings with shot-pin cylinders, disc brakes and thrust protection. Consult your Turn Act distributor for additional information.
|
|
Firestone Airstroke actuators have long been used in the industrial market as pneumatic actuators incorporated into new and innovative machinery designs as well as replacement actuators for existing applications that had previously used traditional pneumatic or hydraulic cylinders.
These replacement markets are created by the advantages of a flexible walled pneumatic actuator that is durable, operates well in corrosive and abrasive industrial environments, easily accepts misalignment, and has a high ratio of stroke to collapsed height. Each of these features give Firestone Airstroke actuators the advantage over traditional cylinders.
|
|
Mustpress lifting bags are adapted to any industrial equipment and usually replace hydraulic and mechanical jacks to Press, Lift, Grip, Guide, Dampen, Handle.... They are made of elastomer coated fabrics and supprt high inflation pressure (up to 100 bars).
Available in different shapes and dimensions (square, round, rectangular, toric).
. Compact when empty
. High homogenous thrust
. High temperature resistance
. Important stroke (multi-stage)
. No maintenance required
|
|
ContiTech Air Actuators - Our All-Around Talents
ContiTech air actuators as complete systems are all-around talents for industrial pneumatics.
With a broad range of products and individual developments to deal with specific customer requirements, we solve even difficult pneumatic tasks in machine, apparatus and equipment engineering.
ContiTech air actuators can be used instead of pneumatic or hydraulic cylinders in a wide range of applications.They have effective diameters of between 60 mm and 950 mm, can execute strokes up to 455 mm and can exert forces of between 0.5 kN to 440 kN.
|
|
TOX-Powerpackage
Types with 2 - 2000 kN pressforce at 4 to 10 bar air pressure
TOX-Powerpackage - the energy saving Pneumatic intensifier with integrated oil system and automatic activated powerstroke. Our technology combines Pneumatics and Hydraulics providing you with the following advantages:
– Lower energy consumption
– Compact, clean design
– High stroke frequency
– Soft-touch: easy on your tooling
– Reduced noise level
The pneumohydraulic intensifier cylinder line-Q is the entry version of the well known TOX-Powerpackage, with the same quality. The cylinder can be mounted to any position. These cylinders are available off the shelf for immediate delivery.
Application range: clinching operations, sheet metal joining, punching, coining, press-fitting, mounting, bending, pressing and …many more
|
|
The range of hydropneumatic units represents a new work concept in all those fields requiring an application of force.
The units are the result of technical development where two applied techniques, namely the speed of pneumatic action and the high force developed by hydraulic systems are combined to give the units the required versatility in operation so as to achieve high levels of efficiency in the various fields of application.
Hydropneumatic units are designed for high cycling operation under conditions of maximum safety and minimum noise, but in no way are the essential features of a production machine neglected, namely:
* SPEED
* SILENT OPERATION
* ECONOMIC RUNNING
* VERSATILITY IN APPLICATION
* MAXIMUM SAFETY
|
|
|
A unique solution for delivering the speed, accuracy & repeatability of electronic actuators but with the force capability of pneumatics...
|
|
|
|
|
|
|
Zero friction, life unlimited, the Airpel -AB provides "force without friction" which is made possible by a specially shaped stainless steel piston that is precisely fitted to a borosilicate glass cylinder. The introduction of pressurized air into the air bearing's cylinder creates a true air bearing airflow effect around the piston. With as little as 5 PSI of air applied to the cylinder, the same air that drives the piston also produces a stiff cushion of air to support the piston and prevent it from contacting the cylinder wall. The result is an air cylinder that delivers virtually unlimited piston life, no lubrication and clean operation. In addition, the output force of this friction-free air cylinder is reduced only infinitesimally by movement of ultra-low friction ball joints used to connect the rod. These unique qualities allow Airpot Corporation to guarantee that the Airpel -AB will exceed the life of any machine or instrument in which it is installed. Industries include, semi-conductor, optics, medical, and test and measurement. Applications may include, precise tensioning, positioning mechanisms supporting delicate materials, sensitive force control for holding or clamping fragile materials, counterbalancing and safety support for vertically positioned linear motor driven masses, or precise laboratory test equipment. Airpel-AB air bearing actuators are available in metric models with four bore diameters and ten standard strokes to provide precisely repeatable driving or supporting forces from 2 grams to 58 kg. Operating temperatures range from -20 C to +90 C.
|
|
When in doubt, opt for pneumatics: linear or quarter-turn actuation of process valves, including Ex-protection. COPAC for gate valves and sluice gates, COPAR for butterfly and ball valves.
• Diameters 80 ... 320 mm
• Stroke lengths 40 ... 2,000 mm
• Force 2800 ... 47,500 N
• Double-acting
• Diameters 1 ... 880 mm
• Torque 7.5 ... 8,800 Nm
• Rotation angle 90°
|
|
Size 6, 8, 10, 12, 16, 25, 32, 40 mm
Torque 0.15 ... 20 Nm
Swivel angle 0 ... 270°
Position sensing
Fixed cushioning.
|
|
The smallest rodless drive in the world. Available as standard with integrated guide and optionally with recirculating-ball bearing guide. Features: excellent guidance, higher characteristic load values and virtually leakage-free.
• All functional interfaces accessible from one side
• Optimised mounting interfaces
• Precision mounting interfaces
• Stroke range 1 ... 1,900 mm
• Electrical and hydraulic cushioning variants
• Option of second slide
|
|
|
Versatile mounting in both horizontal and vertical applications. Stroke is contained within the cylinder itself for space saving advantage. Allows force to be applied in both directions. Six bore sizes. Self-lubricating bearing rods, guide and support load the full length of the cylinder's stroke. Adjustable carrier maintains true tracking. Loads to 800 lbs. Maximum stroke range from 135 to 283 inches. Available in any incremental length.
|
|
Three models are available:
* Cylinder with a non-guided carrier for small guided loads from 16 to 80 mm bores.
* Cylinder with a guided carrier and smooth bearings, for moderate loads from 16 to 80 mm bores.
* Cylinder with a guided carrier and with crossed roller bearings, for heavy loads from 25 to 50 mm bores.
|
|
PNEUMATIC ACTUATOR EB-DW, DOUBLE ACTING
FEATURES
- Maintenance-free, continious lubrication
- Suitability for valves with an angle of 90°
- Blow-proof shaft bearing
- Torques in agreement with EN ISO 5211
- Control pressure min. 2 bar, max. 10 bar
- Good visible elastic position indicator
- Function return by turning the supply plate:
Currentless - close
Currentless - open
- All elements of connection are made of stainless steel
Possibilities of mounting and accesories are shown in chapter 4.3.
GENERAL APPLICATIONS
- Water and wastewater technology
- Shipbuilding
- Swimming pool technology
- Bulk handling
- Pneumatic conveying systems
- Chemical industry
|
|
|
Good choice where existing guided and supported loads require pneumatic actuation. Internal load-supporting bearing design offers high bearing surface for durable, dependable performance. Low breakaway and high speeds. Handles loads up to 370 lbs. Strokes of 20 plus feet.
|
|
|
|
|
|
|
The Airpot Actuator is an instrument class pneumatic pressure or vacuum operated device designed to provide ultra-low friction and exceedingly long life with the least amount of mass and contamination. It is particularly well suited for applications requiring the most sensitive response possible from an air cylinder. Airpot Corp. manufactures two basic families of pneumatic actuators. Both employ our unique combination of a Pyrex® glass cylinder and graphite piston and have similar performance properties with respect to friction, cleanliness, and temperature range. The major differences are in the actuation direction capabilities, outer construction, mounting features, and dimensions. The performance properties of either product are vastly superior to those of conventional cylinders. Airpot Corporation is the world's leading manufacturer of ultra low friction, super-responsive pneumatic piston and cylinder motion dampers, actuators and Snubbers. Our unique seal-less construction and combination of materials allow unsurpassed longevity, high cycle rates without lubricants, smooth operation at extreme temperatures, and instrument quality performance for low to medium force and energy levels. Common applications for our Actuators, Piston and Cylinder Motion Dampers, and Snubbers include: semiconductor & IC processing equipment, web/wire/filament tension controls, test & measurement instruments, automated medical analyzers, dispensing & vending machines, high capacity mail & cash handling equipment. Complete line includes instrument quality, precision air dashpots, snubbers, pneumatic actuators, Airpel Anti-Stiction Air Cylinders and Airpel-AB cylinders.
|
|
PneuMoment Pneumatic Actuators
The Bimba PneuMoment pneumatic actuator features a revolutionary, compact design that uses conventional pneumatic technology but has the capacity to carry high loads and moments.
The Bimba PneuMoment pneumatic actuator carries high moment loads and has a compact design. It also uses non-lube bearings, has a built-in track for position sensing switches, and guide beam end cap ports transmit air or vacuum through the actuator from the guide beam end cap to connect additional automation devices such as grippers.
The actuators also have internal or external bumpers, external shock absorbers for retract and extend strokes, internal stroke adjustment - full stroke, retract and extend (1-1/16" and 2" bores only), and magnetic position sensing.
Bore sizes are 1-1/16", 27mm, 1-1/2", 38mm, 2", 50mm, 2-1/2", and 63mm. Standard stroke lengths range from 1" increments to 6" and 25mm increments to 150mm.
|
|
|
Modular concept of assembly of elements of automation without interfaces (direct assembly) 208 combinations. Possible indirect assembly: plan, interface and provided screws and bolts. Reduction of study and maintenance. Effective, simple, economic.
|
|
|
MSC, ZSC and MSN elements of the Easy-2-Combine.Dia range. 6 with 25mm, standard races 10 with 200mm. Ideal solution for the projects of automation and assembly. Optimization of the guidance and the sweeping force. Easy maintenance.
|
|
|
Camozzi offers a wide range of cylinders with diameters from 6 to 200 mm and with strokes from 5 to 3000 mm, single-acting or double-acting, with or without through rod, magnetic or non-magnetic, with external guidings available on some models. The cylinders can be used in numerous applications, such as assembly lines, packaging and production machinery, at high temperatures and in extremely corrosive environments. The large and versatile range of Camozzi’s cylinders allows the user a greater degree of flexibility in devising technical solutions, by offering numerous mounting options, high speed rates and ensuring the use of high quality raw materials in its components. A large selection of cylinder accessories is available to complete the range.
|
|
ACT-1
Pneumatic Actuators (Air Cylinders)
with Embedded Feedback Sensors
Enfield Technologies pneumatic actuators contain linear resistive transducers for continuous analog absolute position feedback.
Features:
* Analog LRT sensor
* Embedded design is compact and provides protection to the sensor
* Standard M8 3-pin sensor connector
* Multiple bore (diameter) and stroke (length) sizes available
* Compatable with Enfield Technologies controllers as well as components from many other vendors
* Independent Input Signal Scaling
|
|
Pneu-Turn Actuators
The Bimba Pneu-Turn Actuators have cylinder bodies with 304 stainless steel for maximum seal life and an actuator body that's high strength, anodized aluminum alloy for maximum corrosion protection. The porting ends are high strength, anodized aluminum alloy.
The shaft bearings are self-lubricating, sintered iron copper material for lower friction and the piston seals run with Buna "N", U-cup type for low breakaway friction and long life.
Angle adjustment is an option that allows 45° of adjustability at each end and the adjustable cushions are an option that controls deceleration at the end of the rotation.
Torque factors include 9/16" bore, single rack; 9/16" bore, double rack; 3/4" bore, single rack; 3/4" bore, double rack; 1-1/16" bore, single rack; 1-1/16" bore, double rack; 1-1/2" bore, single rack; 1-1/2" bore, double rack; 2" bore, single rack; and 2" bore, double rack. The Pneu-Turn angles of rotation are 45°, 90°, 180°, 270°, and 360°.
|
|
Features
● Rotary cylinder with double rack and pinion
● High precision positioning
● Shock absorber is mountable
● Intergrated table and pinion (Rigidity)
● Various applications through round table
● Easy wire arrangement by hollow axis
● Auto switch is mountable
|
|
RCM, RAN, RAP and RWT. Swing angles:
90,100,180,190,270,275,360° and indexable.
Precise positioning. Many possibilities of fixings. Assembly simple and fast of the parts to be added specific to the customers.
|
|
|
|
