|
|
This comprehensive range of pneumatic actuators includes conventional ISO and VDMA cylinders, guide units, slide cylinders, compact and clamp cylinders.
|
|
2A Cylinders Parker's 2A series pneumatic tie rod cylinders are heavy duty, steel-bodied cylinders designed for applications where a conventional aluminium-bodied pneumatic cylinder would be vulnerable to external physical damage. Typical applications include steel mills, aluminium smelters and foundries.
2A cylinders are designed to NFPA and ANSI specifications.
Standard pressure: up to 18 bar (250psi)
Bore sizes: 25.4mm to 355.6mm (1" to 14")
Choice of rod diameters and rod end threads
15 standard mounting styles
Any practical stroke length
Standard temperature range: -20°C to 80°C
Suitable for filtered & lubricated air - also available for non-lubricated air
Options include cushions, stroke adjusters, rod bellows and wipers, proximity sensors etc.
Special designs to customer specification.
|
|
Series CV
New Generation Series CV Cylinder design enhancements include increased width of PTFE wear ring for greater support, durability, and increased piston seal retention for higher speed applications. A new imperial design of the Series CV Cylinder is available with imperial ports, stroke length, and rod for easy integration in imperial facilities. A rod seal retention ring has been added to improve performance in extreme applications. Units affected by these enhancements include Series SK/SL, SG and SCV Slides.
Standard features of the Series CV Cylinders include rugged and lightweight anodized aluminum alloy heads, caps, and tubes. Port Controls® regulate speed through the entire stroke. Standard alloy steel and optional corrosion resistant stainless steel piston rods are hard chrome plated for maximum life and durability. Female threads and a variety of mounting accessories provide ease of integration.
Advantages: Anodized aluminum alloy heads, caps and tubes, durable, robust, longer life, drop-in replacement.
|
|
P1D ISO PNEUMATIC CYLINDER
General Construction: Anodized aluminum heads, caps and profiled cylinder body for 32-125mm bores. Anodized aluminum round body and steel tie rods for 160-200mm bores.
Versions: Standard, Removable Gland and Clean (IP65)
Standards: ISO 6431, ISO/DIS 15552, VDMA24562, AFNOR
Bore Sizes: 32, 40, 50, 63, 80, 100, 125, 160 and 200mm
Strokes: Available in any practical stroke length
Piston Rods: 1240mm, case-hardened and chrome plated steel (standard)
Piston Rod Ends: 2 standard (male and female), specials to order
Single or double piston rod ends available
Cylinder Mounting Styles: 16 standard
Operating Medium: pneumatic (air), 10 Bar (145 psi)
Standard Fluid: Dry, filtered air
Standard Operating Temperature: -20C to + 80C (-4F to + 176F)
Optional High Temperature Option: -10C to + 121C (+14F to + 250F)
Ports: BSPP standard, other porting styles (NPTF, BSPT, etc.) available
|
|
|
A full line of pneumatic cylinders according to ISO 6431-VDMA 24562 as well as comprehensive accessories are also included in ROSS EUROPA's offering. Do not hesitate to contact us for further info.
|
|
Series 1000-8000
Series 1000-8000 Rotary Actuators are a rugged line for pneumatic or hydraulic service. These units have a wide range of rotations, options, and shaft configurations allowing them to be configured for most rotary applications. Standard rotations range up to 450° with torques to 31,800 in-lb.
Advantages: Four bore sizes available in single and double rack models, wide range of options available.
|
|
TORK-MATE - Pneumatic Actuators - 890 Series
The Tork-Mate 890 series extended life actuators are ideal for the operation of 90° turn devices such as butterfly valves, ball valves, plug valves, damper valves and other devices. Tork-Mate pneumatic actuators have features that are unique, providing many benefits to the user looking for worry-free service.
The Tork-Mate 890 series actuators feature pinion travel stops that allow a full /-10° of valve travel adjustment. As an option, extended stroke adjustment screws can be added for inexpensive throttling applications.
Special piston seals provide greatly extended life compared to standard O-ring actuators. All other bearings, seals and components have been engineered to provide superior and extended service lives.
|
|
|
Stroke is contained within the cylinder itself for space saving advantage. Allows force to be applied in both directions. Single acting, double acting, double purchase and track models available. Wide range for bore sizes and options
|
|
|
Ø 20 - 100 mm, double-acting, magnetic piston, piston rod: through, non-rotatable, with internal thread
|
|
PNEUMATIC CYLINDER DOUBLES EFFECT - SIMPLE STEM
BORING: DIAMETER 94 has 400mm
PRESSURE Of USE: 1 to 10 BARS
|
|
Jacks with PARKER stems - ORIGA are recognized in the whole world for their robustness and their reliability in all the fields.
The various series, conceived according to standards ISO and VDMA guarantee a perfect interchangeability
|
|
|
The new jack Série GPC is appropriate in particular for the applications where a precise guidance, in spite of loads raised under the transverse efforts, is required. The principal characteristics of these jacks for double purpose, with damping in elastic thrust are a high precision and the absorption of couples and high transverse efforts. The two guide columns largely dimensioned can have to four smooth bearings this guarantee a great stability. Series GPC is proposed from 12 to 63 mm and in lengths of race going to 200 Misters the user has the choice, according to his needs, between two versions; the version with guidance by ball bushes, as the version with guidance by smooth bearings support high loads. Moreover, the jack with guidance by ball bushes is characterized by its accessibility. Many possibilities of fixing are offered: a multitude of tapped holes, smooth holes of holes of locating and grooves in T are laid out on the body and the mobile plate. The columns are equipped with scraping joints to the front one. The openings of connection are available on two faces. The grooves of the detectors allow the "micro" assembly of the completely integrated and protected detectors.
|
|
Ø 10 mm, single-acting, spring retracted, magnetic piston, cushioning rings, integrated rear eye, corrosion-protected
|
|
- Ø 25 - 35 mm, single-acting, spring retracted, screw fitting, piston rod: stainless
- Ø 25 - 35 mm, single-acting, spring retracted, foot mounting, piston rod: stainless
- Ø 25 - 35 mm, single-acting, spring retracted, flange mounting, piston rod: stainless
|
|
Jacks with PARKER stems - ORIGA are recognized in the whole world for their robustness and their reliability in all the fields.
The various series, conceived according to standards ISO and VDMA guarantee a perfect interchangeability
The most various versions, developed starting from the standard models are available.
|
|
|
SMC actuators are specified in all major industrial markets, and are created to provide you with the largest array of choices. From Semiconductor to Automotive, Packaging to Medical, Food to Heavy Vehicles, SMC supplies to engineers around the world. Our standard features include a wide range of 16 inch-size and 18 metric-size bores, multiple mounting configurations, and auto switch capability as a standard on most series. We have designed and built actuators for high precision performance and exceptional reliability. Our global production facilities make product availability simple in all industrialized counties around the world. SMC actuators are available in a wide variety of styles, including linear, guided, rotary, gripper, specialty, and each series comes with a full complement of standard options.
|
|
Screw-in cylinder, series SWN
Ø 6 - 16 mm, single-acting, spring retracted
Working pressure
min/max : 2 / 8 bar
Ambient temperature min./max: -20°C / +80°C
Medium temperature: -20°C / 80°C
Medium compressed air acc. to ISO 8573-1: 2001
Compressed air class class 5-4-4, class 6-4-3
materials:
cylinder tube: aluminum, anodized
piston rod: stainless steel
Seal : acrylonitrile butadiene caoutchouc
Nut : galvanized steel
|
|
Series of round jacks:
MECSTREME Æ25 with 125mm resists corrosion
(stainless 304)
and REXTREME Æ32 with 80mm resists the acids
(stainless 316)
Conform to the standard ISO 15552.
|
|
Series KPZ Dia. 16 with 100mm, race 5 with 100mm.
Double jack and simple effect, tandem and multiposition, possible antirotation.
Crossing, hollow or hexagonal stem. Food by the back. Small overall dimensions.
|
|
GPC Dia. 10 with 63mm.
Element of the range Easy-2-Combines.
Race 10 with 200mm. Exhausted stage or ball bush. Is appropriate for precise movements with high side loads. Easy adjustment length of race.
4 versions available.
|
|
Series OCT. Dia. 10 with 25mm. Threaded connections or Rapids prefabricated
Piston octagonal = profit of push de17% and stem antirotation.
Compact construction, shaped tube aluminum, 1 only form of mediums and detector for all the diameters.
|
|
TWC Dia. 6 with 32mm, bend standard 10 with 100mm.
High loads possible, anti-torsion, possible locking end of the road.
Design flat, easy to go up, many possibilities of fixing of the sensors.
Excel thorough obstruction ratio/.
|
|
Jack meeting the standard ISO 24562
Dia. 32 with 250mm.
Complete range.
Tie jack TRB, shaped PRA and PRB, specific jack agroalimentary ICL.
|
|
Without corners and sharp edges - and yet outstanding! To ISO 6431/VDMA 24562. Rounded, easy to clean design, with integrated proximity sensor.
• Diameters 32 ... 100 mm
• Stroke length 10 ... 500 mm
• Rod wiper seal made of PUR
• High corrosion resistance
• Food industry approved lubricating grease (to USDA-H1) and rod wiper seal (to FDA)
• Optional: flanged cover screws made of stainless steel
|
|
Compact Clean-Act™ cylinders are designed for a clean room evironment.
Features
Low Friction - non-filled thermoplastic polyester rod bushing
Addtional rod seals with four seating points
Vacuum port is tunneled between 2 multi-lobed seals
Benefits
Eliminates the possibility of petroleum based lubricants and bronze bushing particles from entering the environment, in the event of a rod seal failure.
Allows for vacuum switch line to be used to diagnose a failure of either the outer wiper seal, or inner pressure seal and will act as vacuum preventing any unwanted material from entering the environment.
Available in standard inch Bore size(s): 3/4" to 1-5/8" Bore
Available in stocked lengths from 1/8" to 4"
Note: Longer or shorter strokes available – Consult with Compact Automation Products LLC experienced application engineers today. Contact them at techsales@compactautomation.com or by calling 864-647-9521
|
|
|
Clean and corrosion resistant stainless steel outer cylinder and inner glass and graphite components offer no lubrication operation. The Airpel Air Cylinder does away with any perceptible stiction. And reduces running friction to exceedingly low levels. This gives it the unique ability to impart super smooth motion – motion smoother than any other air cylinder. Even at very low pressures. Even at very slow speeds. Even with very short strokes. Even after standing idle for years! How do you account for this remarkable performance? The Airpel incorporates a unique construction to become an instrument-quality air cylinder. It uses a precision fit graphite piston which slides freely – without lubrication – inside a Pyrex® glass cylinder. This makes it ideal for forces from a very few grams to 30 lbs. or more. In fact, Airpel is particularly well-suited to applications requiring smooth motion at ultra-low pressures – and to moving lightweight objects or delicate loads at slow or high speeds. But this air cylinder is no weakling. It can be used to provide brute forces, too – operating under extreme temperatures, at very high speeds and cycle rates, with no degradation in performance. It also runs cleaner than typical air cylinders because it contains no oil. What’s more, it has no rubber or plastic seals to abrade, wear out, or harden with time. And because all exposed surfaces (except pivot model bushings) are stainless steel and nickel, Airpel is extremely clean and corrosion resistant.
|
|
|
|
