|
|
- Best-In-Class Simulation & Modeling Tools
Comprehensive 3D drawing capability and finite element analysis expertise, coupled with years of experience results in improved design quality. Eaton excels at using these cutting edge tools to simulate components and assemblies in real-world applications, to assess areas like pressure loading and stress impact.
- Advanced Rod Coatings Capability
Eaton offers a comprehensive line of coatings, ranging from Nickel Chromium to Laser Clad, that provide the perfect balance of wear and corrosion resistance to meet your specific application needs. What's more, our Innovation Team pursues cutting edge R&D, advancing our work on next generation technologies.
- Custom Cylinders Built to Your Specifications
Eaton engineers welcome atypical application or cylinder needs; with decades of experience, they will configure the right solutions quickly. Whether it means solving unique application problems, upgrading existing products, or designing new cylinders, we're up to the challenge.
|
|
ISO/VDMA Series Metric Standard Interchangeable Cylinder
The ISO/VDMA Series is an aluminum body air cylinder line that is designed to meet all your international cylinder requirements. In fact, our ISO/VDMA Series cylinders are designed to meet the requirements of ISO 6431 (International) and VDMA 24562 (Germany). The combination of lightweight aluminum construction and proven reliability makes our ISO/VDMA Series the Superior Interchangeable metric, international standard air cylinder line.
GeoMetric® ISO/VDMA Cylinder
The GeoMetric® Series conforms to the following cylinder specifications: VDMA 24562, DIN/ISO 6431, and ISO/FDIS 15552. One of the most desirable features of the cylinder line is the dual switch/sensor groove design that is a standard offering on all GeoMetric®cylinders. The dual groove design offers great flexibility when mounting switches and sensors to the cylinders. One groove is a traditional round groove and the other is what we call the CombiGroove®. The CombiGroove® is a unique design that will accept round and angular switches/sensors.
|
|
Conforming to ISO 6431, VDMA 24562 and NFE 49-003-1 standards. Seven ranges including SMART cylinder with stainless steel versions for all requirements. Double and single acting models with bore sizes from 32-200mm. Comprehensive choice of mountings.
Norgren is proud to announce the launch of its new Roundline Plus repairable cylinder, and the F Series Plus flat cylinder full product ranges. These products are fully interchangeable with competitor products, and very aggresively priced. Visit www.trynorgren.com for a FREE sample.
|
|
Air Cylinders with Adjustable Cushions
The Bimba Air Cylinders with adjustable cushions have a readily accessible cushion needle for easy adjustment, double acting models, and a 304 stainless steel body with mirror finish I.D.
High strength aluminum alloy porting ends and ground and roller burnished 303 stainless steel piston rods come standard. Also, the air cylinders have Buna N "U" Cup Seals, low breakaway friction - less than 5 PSI - and special stroke lengths available on request.
Air cylinders come in 3/4", 1-1/16", 1-1/2", 2", 2-1/2", and 3" bore sizes.
Bimba's cylinders with air cushions provide a possible solution to destructive energies. The air cushion traps a small amount of exhaust air at the end of stroke, providing an air pocket that decelerates the load. This reduces the potentially destructive energy being transmitted to the cylinder and other components.
|
|
Extruded Flat Lift Table
EF1-based, guided cylinder with four shafts for maximum rigidity. It is designed for lifting applications where other non-rotating cylinders cannot handle an overhung load and space is at a premium.
Four-shaft support withstands offset loads and moments.
Simple, efficient design provides economical alternative to other costly guided actuators.
Joins the EF family of products, so shares all the same benefits--long service life, low friction operation, fast delivery.
Convenient wide tooling mounting surface.
Intended for vertical lifting applications (should not be mounted horizontally or with tooling plates facing down).
|
|
GeoSlide Series Guide Unit
The GeoSlide guide units utilizes Numatics GeoMetric ISO 6431 VDMA cylinders. The FHG & FHK series offers high load carrying capabilities in a metric package.
Features:
Bore sizes range from 32mm to 100mm.
Strokes up to 500mm.
Linear ball or bronze bushings option.
Available in a "U" style body.
LCX Series Linear Slide
The LCX Series linear slide combines cost-effectiveness with proven dependability. An economical alternative with greater load carrying capabilities.
Features:
Low Cost
High Load Capability
Stainless Steel Shafts Available
Engineered Plastic Polymer Bearing
Available in 3 Bore Sizes
|
|
Z Line Air Cylinders
The Bimba Z Line Air Cylinders are for extremely tough applications.
The Z-Line air cylinder has the rolled-in construction of the Original Line but features the following: Larger diameter, two-piece 303 stainless steel piston rod HEX-STUD rod end thread of heat treated alloy steel - easily removed in case of failure due to overload, and cushion quiet elastomer bumpers.
No charge options include the Magnalube G, Molycoated body, and magnet.
Bore sizes for the Z Line cylinders are 3/4", 1-1/16", 1-1/2", and 2".
|
|
Hole Punch Cylinders
Designed to punch millions of holes in plastic or other thin sheet materials 2 to 3 mils thick, the long-life BIMBA Pneumatic Hole Puncher will give you more cycles per penny.
The hardened steel cutter with ground razor sharp edges is an integral part of the cylinder. A small air jet ejects the slugs from the cutter preventing slug build up, and Elastomer Bumpers insure cushion quiet operation.
Less than 1" in diameter, several cylinders can be closely mounted. Available in seven hole cutter sizes from 1 / 4 " to 5 / 8".
This stainless steel body, single acting spring return cylinder has a 3 / 4" bore and 1" stroke. A nickel plated steel rod guide is threaded for easy nose mounting, and a 1 / 8" NPT air inlet is conveniently located in the rear head.
Prelubricated with HT-99, the cylinder can be operated with ordinary shop air at pressures up to 250 psi.
|
|
MRS Cylinders
* The Bimba MRS® Magnetic Reed Switch Air Cylinders are specifically designed to operate Bimba position sensing switches to actuate programmable controllers, relays, solenoids, timers, or any other electrically operated equipment.
* MRS cylinders have an additional groove in the piston to accommodate a magnet. They differ from the Moption because they combine features of the "Z" line with Original Line construction. Type 303 stainless steel rods are standard.
* Options at no additional charge include Magnalube G, no thread, and switch track for standard reed switches.
* Bore sizes available are 9/16", 3/4", 1-1/16", 1-1/4", 1-1/2", 1-3/4", 2", and 2-1/2".
|
|
If you need electrical output of piston position, Airpot Corporation
offers an easy-to-install, secure, and reliable solution. Read on...
For customers desiring electrical output of piston position, most Airpel models are offered with an optional switch-activating magnet on the piston, as well as one or more optional aluminum tracks attached to the cylinder. The tracks are specially designed for easy, secure mounting of the Sick, Inc. position sensors which we offer separately. We stock popular models of these extremely reliable GMR sensors along with matching accessory extension cables.
The Airpel incorporates a unique construction to become an instrument-quality air cylinder. It uses a precision fit graphite piston which slides freely – without lubrication – inside a Pyrex® glass cylinder. This makes it ideal for forces from a very few grams to 30 lbs. or more. In fact, Airpel is particularly well-suited to applications requiring smooth motion at ultra-low pressures – and to moving lightweight objects or delicate loads at slow or high speeds. But this air cylinder is no weakling. It can be used to provide brute forces, too – operating under extreme temperatures, at very high speeds and cycle rates, with no degradation in performance. It also runs cleaner than typical air cylinders because it contains no oil. What’s more, it has no rubber or plastic seals to abrade, wear out, or harden with time. And because all exposed surfaces (except pivot model bushings) are stainless steel and nickel, Airpel is extremely clean and corrosion resistant.
|
|
69-032/090-F
GENERAL CHARACTERISTICS
type of construction: with tie-rods
operation: double-acting
materials: AL tube and endcovers - NBR seals - other cementated steel
type of mounting: by means of holes in the body
type of mounting: any
Operating temperature: 0° + 50° C (with dry air -20°C)
standard rotation: 90° - 180° (others on request)
PNEUMATIC DATA
operating pressure: 0,5 -M0 bar
Fluid: filtered air, without lubrication
|
|
Turn-Dex is a rotary actuator with an internal unidirectional clutch. The output shaft rotates in one direction only and remains at end of stroke while the actuator is reversed. Turn-Dex is available in two series: the Comp-Act, incorporating the Comp-Act actuator and the Turn-Act, incorporating the Turn-Act actuator.
Applications Include:
Turntable Work Stations
Drive Conveyor Rollers or Belts
Drive Material Feed Rollers
Ratchet Type Drive
Sheet Feed Material From a Stack
Perstalsis Pump Drive
Low Speed High Torque Motor
Product Mixing
APPLICATION CONSIDERATIONS:
Overrun: The output shaft can be manually rotated only in its drive direction. Large loads may coast after the actuator has stopped. The output shaft cannot be reverse rotated- Forcing it backwards could damage the Turn-Dex.
Accurate & Repeatabte Positioning: Due to the overrun nature of the clutch external stops, brakes, ro«er and detents or shot-pins is required for accurate and repeatable positioning.
Special Options: Turn-Act will provide customized units to fit your specific application needs. Modifications include special shafting, special mounts, dutch housings with shot-pin cylinders, disc brakes and thrust protection. Consult your Turn Act distributor for additional information.
|
|
More reliability, more possibilities, more than just standard: modular round cylinder DSNU. A wide variety of variants and mounting options: the best solution for every application, both technically and economically.
• Diameters 8 ... 63 mm
• Stroke lengths 10 ... 500 mm
• X-strokes
• Standard types available from stock
|
|
Stopper Cylinders
EF1 Cylinder was modified for a conveyor stopping application.
Featuring a heavy-duty mounting, the cylinder's rod/bearing design was developed to withstand side impact loading.
Stroke lengths: 15, 20, 25mm.
Max Side Load: 12, 11, 10lb.
|
|
A space saving and guided cylinder with no equal. With a sealing system
unlike any other and endless possibilities including true synchronization
of two or more cylinders the ZR is worth a look.
The answer for dirty and dusty environments.
Available with slide or roller guide
Extremely low leakage
Smooth linear movement
High durability and operational reliability
Deliverable with a brake and encoder
Integrated valves if required
|
|
Ultran Rodless Cylinders
The Bimba Ultran rodless cylinder provides one of the highest coupling strengths available. This means it can carry higher loads without causing the piston to uncouple from the carriage.
Bimba also offers two magnetic coupling strength options (Gold and Silver) to suit a wide variety of applications. The Silver option uses two sets of magnets instead of three.
Bore sizes are 5/16", 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", and 2".
Bimba offers a model with built-in guides (Ultran Slide) and an unguided unit (Ultran).
Save space and streamline your design with the Bimba Ultran rodless cylinder! Application possibilities include transferring, feeding, door opening, cutting, silk screening and overall length savings.
|
|
All Stainless Steel Non-Repariable Cylinder
Corrosion resistant 303 Stainless Steel end caps.
304 SS body with mirror finish ID for long, reliable seal life.
Urethane rod wiper designed to withstand exposure to harsh chemical solutions while limiting ingress of the solutions and application matter into the cylinder.
PTFE-based rod and pivot bushings selected for their resistance to many commonly used cleaning solutions.
Nitrile seals are standard with optional high temperature or other materials available.
|
|
All Stainless Steel Repairable (Bell Ring Style)
* The new all stainless repairable Original Line cylinders are ideal for food processing, chemical, medical, pharmaceutical, offshore or marine equipment, and energy production or waste management applications. The bell ring design also offers the added benefit of full repairability without the need for hand tools by securing the body to the rod guide with a knurled, threaded nut.
* Bore sizes for the all-stainless steel repairable cylinders are 3/4" and 1-1/16".
* Engineering specifications include 304 Stainless steel body, low friction Buna N "U" Cup seals and rod wiper, 303 Stainless steel endcaps, piston rod, and bell ring nut, and Composite FDA approved rod bearing and FDA approved lubricant.
|
|
The first friction-free cylinder: extremely smooth surface of Ra 0.6 µm, highly corrosionresistant and repairable.
• Diameters 32 ... 100 mm
• Stroke lengths 10 ... 500 mm
• Constructed from of stainless steel
• Rod wiper seal material PUR
• Fully repairable (cover connected to profile)
• Food industry approved lubricating grease (to USDA-H1) and piston rod wiper seal (to FDA)
|
|
Benchmark for the standard: profile slots for integrated cylinder switches. Wide range of variants and mounting options.
• Diameters 32 ... 125 mm
• Stroke lengths 1 ... 2,000 mm
• With adjustable end position cushioning (PPV)
|
|
Metric cylinders are standard cylinders that are available in 3 duty types:
Standard Duty
Our most space efficient duty. Short rod bearing and thin piston design. Available as single or double rod end.
Intermediate Duty (Half Husky®)
A combination of our standard and Heavy duty. long rod bearing and thin piston, designed for medium duty service. Available as single or double rod end.
Heavy Duty
Longer rod bearing plus longer piston. Designed for heavy-duty services. Available as single or double rod end.
Metric Options
Metric Accessories
|
|
Three-Position Cylinders
Bimba's Three-Position Original Line stainless steel body cylinder provides three positions with a single cylinder.
Bimba offers the performance and quality of the unitized Original Line cylinder design along with three positive stroke positions.
|
|
TRD Manufacturing
TRD Manufacturing Cylinders are recognized for their durability, high quality construction and long-lasting performance. Manufactured in several different types including, NFPA-interchangeable cylinders, specialized cylinders and accessories, TRD Cylinders represent a significant step towards Bimba's strategy to expand their industry-leading line of actuators.
Advantages of TRD Cylinders Include:
* Space saving design
* Many cylinder options to choose from
* Precision designed to provide accurate linear movement and positioning
* Other models include all stainless steel (SS) and electroless nickelplated (EN), and low friction for smooth operation (LF)
|
|
|
Tie Rod Cylinders feature the patented Enersorb® piston which provides exceptionally low breakaway, high energy absorption and reduced noise output. The floating bearing design allows for minor misalignment and surperior wear characteristics.
|
|
ISO 6431/ 15552 - VDMA 24562 - NF E 49-003 compatible cylinder - PEC type
Available functions :
* single acting
* double acting
* double acting, through rod
* ollow through rod
* supply on the same extremity
* rotation-proof device
65% volume saved compared to an ISO 6431 cylinder
|
|
Series CRS
PHDs newly redesigned Series CRS Cylinder now features a self-lubricating nitrile piston seal to increase cylinder performance and provides the best unit life rating in its class of 70 million linear inches of travel! In addition, this compact cylinder now features a clear anodized extruded body with integral slots for flush mounting of PHDÆs Series 6790 Miniature Switches for additional space savings. Optional shock pads extend cylinder life and minimize piston noise without increasing the length of the cylinder. The compact size of the Series CRS Cylinder makes it ideal for applications where cylinder length is critical.
Advantages: Compact size, eight bore sizes, integral switch slots, thru and threaded holes for easy cylinder mounting, available with two piston lengths.
|
|
Series CTS
Series CTS Compact Guide Rod Cylinders excel in non-rotating cylinder applications where unit length is critical. They also perform as light duty slides where precise location is not required and side loading is limited. Optional shock pads extend cylinder life and minimize piston noise. The shock pad design adds no additional length to the cylinder.
Advantages: Compact size, thru and threaded holes for easy cylinder mounting.
|
|
|
Good for applications where space is at a premium. No mechanical connection to the piston. Fully enclosed actuator body prevents contaminants from entering. Air or oil actuated to 100 PSIG. Operation temperature range of 0°F to 170°F.
|
|
|
