|
|
Narrow Profile Air Table Actuators
The NPA actuator provides precise load guiding with a recirculating ball rail above its bore.
Two bearing styles are offered (single/double bearing block) to accommodate both lower cost and higher precision/cost applications.
With standard strokes up to 120mm, the NPA offers longer travel length than any competitive actuator of its type.
Bore sizes: 12, 20, 32mm. |
|
Diameters 8, 12, 18, 25, 32, 40 mm
Stroke length 1 ... 5,000 mm
Force 30... 754 N
Position sensing
Various cushioning options available
Guide variants
- Basic guide
- Plain bearing guide
- Ball bearing guide.
|
|
Diameters 18, 25, 32, 40, 50, 63, 80 mm
Stroke length 10 ... 3,000 mm
Force 153... 3,016 N
Position sensing
Adjustable cushioning
Guide variants
- Basic guide
- Plain bearing guide
- Ball bearing guide
- Heavy-duty guide.
|
|
Ultran Band Rodless Cylinders
Stainless steel cover strip protects sealed area, prolonging life.
Unique five-ported endcaps provide maximum flexibility.
All models come switch-ready with finely adjustable cushioning.
Available in a variety of bore sizes with stroke lengths up to 3m (10 ft).
Perfect for door opening, material handling/conveying, packaging and palletizing.
Variety of Mounting Kits available for use with each basic cylinder.
Bore sizes: 18mm, 25mm, 32mm, 40mm, 50mm, and 63mm. |
|
The smallest rodless drive in the world. Available as standard with integrated guide and optionally with recirculating-ball bearing guide. Features: excellent guidance, higher characteristic load values and virtually leakage-free.
All functional interfaces accessible from one side
Optimised mounting interfaces
Precision mounting interfaces
Stroke range 1 ... 1,900 mm
Electrical and hydraulic cushioning variants
Option of second slide
|
|
| A new design of pneumatic band cylinders that offer maximum durability for optimal performance. The MX series of band cylinders offer three bearing choices to match your application needs. Profiled rail design used THK Caged Ball technology to reduce friction and extend actuator life. Solid bearing design reduces stress concentration by 59% for optimum performance. Internal bearing design is permanently lubricated for long, trouble-free service. Durable stainless steel bands are stronger and will not elongate like elastomer (non-metallic) bands, providing reliable sealing over the life of the actuator. |
|
| Based on the ORIGA rodless cylinder, proven in world wide markets, HOERBIGER-ORIGA now offers the complete solution for linear drive systems. Designed for absolute reliability, high performance, ease of use and optimised engineering the ORIGA System Plus satisfies even the most demanding applications. |
|
On the basis of jack famous without stem ORIGA which proved reliable in tens of thousands of applications, HOERBIGER-ORIGA proposes the most complete solution for the realization of linear movements.
Conceived completely modular, range ORIGA SYSTEM MORE answers all the industrial applications of the jack without pneumatic and electric stem.
In all more than 500 possible alternatives. |
|
| Versatile mounting in both horizontal and vertical applications. Stroke is contained within the cylinder itself for space saving advantage. Allows force to be applied in both directions. Six bore sizes. Self-lubricating bearing rods, guide and support load the full length of the cylinder's stroke. Adjustable carrier maintains true tracking. Loads to 800 lbs. Maximum stroke range from 135 to 283 inches. Available in any incremental length. |
|
| Good choice where existing guided and supported loads require pneumatic actuation. Internal load-supporting bearing design offers high bearing surface for durable, dependable performance. Low breakaway and high speeds. Handles loads up to 370 lbs. Strokes of 20 plus feet. |
|
| Stroke is contained within the cylinder itself for space saving advantage. Allows force to be applied in both directions. Load capacities up to 8032 lbs. Handles high, off-center loads with consistently smooth operation. Recirculating ball-bearing system for wear resistance and repeated accuracy. Low breakaway. High bending moment capacity. Cost-effective alternate to auxiliary rail systems. |
|
Three models are available:
* Cylinder with a non-guided carrier for small guided loads from 16 to 80 mm bores.
* Cylinder with a guided carrier and smooth bearings, for moderate loads from 16 to 80 mm bores.
* Cylinder with a guided carrier and with crossed roller bearings, for heavy loads from 25 to 50 mm bores.
|
|
- Great flexibility in use thanks to a modular concept
- Compact Design associating movement and positional checking
- 65 models of accessories
- Adapted to function as well in clean room as in foundry
- Weight Ratio/power optimized
- System of sealing offering a regular movement without friction
- Compact Piston allowing an optimum guidance
- Possible Intakes air of only one with dimensions or directional
- Lifespan of 8000 km minimum
- Possibility of being directly charged
- Diameters from 10 to 80 mm
- Races up to 6000 mm (12000 mm possible)
- Interchangeable and retro-adaptable Guidance
- Options of positional checking of integrable positions
- Option slow speed
- Option high speed
- Version with passive or active brake |
|
GeoSlide Series Guide Unit
The GeoSlide guide units utilizes Numatics GeoMetric ISO 6431 VDMA cylinders. The FHG & FHK series offers high load carrying capabilities in a metric package.
Features:
Bore sizes range from 32mm to 100mm.
Strokes up to 500mm.
Linear ball or bronze bushings option.
Available in a "U" style body.
LCX Series Linear Slide
The LCX Series linear slide combines cost-effectiveness with proven dependability. An economical alternative with greater load carrying capabilities.
Features:
Low Cost
High Load Capability
Stainless Steel Shafts Available
Engineered Plastic Polymer Bearing
Available in 3 Bore Sizes |
|
| ... products without technical information |
| |
ZIMM Screw Jack Building Block System
We lift, lower, push and pull loads from 5 to 1000 kN.
* Efficient construction due to our Screw Jack Building Block System - all components compatible
* All components from one supplier saves purchase costs.
* Delivery of pre-mounted units and assembly groups, motors included
* Short delivery times
* Capable of bearing tension and compression loads
* Attractive design
* Stainless spindles and components on request
* Custom components for specialist applications on request. |
|
Principle: rotary actuator after helical gear switch prinziple
combined with a linear cylinder
Size: 40 bis 125 [mm]
Max. allowable operating pressure: 160 [bar], higher on request
Torque: till 2.050 [Nm], higher on request
Angle of rotation: 90°, 180°, 270°, 360°, and any intermediate angle, even above 360°
Stroke: 0 to 1200 [mm], higher on request
Temperature range: -25°C to 70°C
Options: end cushioning, longe-range adjustable end stop, control switch assembly, locating pin, etc..
Special on request. |
|
| ... products without technical information |
| |
type ST 0
Max. load thrust: 4 000 [N]
Switching-off thrust: 4 500 [N]
Operatings speed: 4 to 40 [min-1]
Operating stroke: 8 to 40 [mm]
Ambient temperature: -25 to +55 [°C]
Protection enclosure: IP 54 (67)
Operating position: any position
Weight: 2,5 to 4,5 [kg]
Standard equipment
· Voltage 230 V AC
· Terminal board connection
· Control part executions:
o 1 thrust switch + 1 position switch
o 2 thrust switches
· Pillar mechanical connection
· Mechanical position indicator
· Manual control |
|
Explosion-proof linear electric actuator ST 1-Ex
Technical data
Max. load thrust: 8 700 [N]
Switching-off thrust: 10 000 [N]
Operating speed: 8 to 80 [min-1]
Operating stroke: 8 to 80 [mm]
Ambient temperature: -25 to +55 [°C]
Protection enclosure: IP 54
Operating position: any position
Weight: 11 to 15 [kg]
Standard equipment
# Voltage 230 [V] AC
# Terminal board connection
# 2 thrust switches
# 2 position switches
# Space heater
# Space heater's thermal switch
# Local position indicator
# Flange mechanical connection
* substitution pillar version
# Manual control
Additional equipment
# Voltage 24 [V] AC
# 2 additional position switches
# Position transmitter with the following type of signal:
* resistive 1x100 [ohm], 1x2000 [ohm]
* current from R/I converter 4 to 20 [mA] with/without power supply
* current (a capacitive transmitter) 4 to 20 [mA]
# Position controller 0/4 to 20 [mA], 0 to 10 [V] |
|
-Explosion Proof linear Actuators with spring return
-Explosion Proof linear Actuators without spring return
-Torque: 800-1000-1600-2000 up to 40000N
-For globe valves
-Power Supply from 24V AC up to 240V AC
-On-Off, 3 Point, Modulating- MFT Multifunction Technology
-Spindle stroke self-adjusting
-Several valve adapter available
-Suitable for zone 1,21
-II 2GD EEx d IIC T6
-IP54 |
|
| Electric linear actuators, also called thrust drives, are mostly applied to automate globe valves. They are also suitable for the operation of butterfly valves with lever arrangements. AUMA linear actuators consist of the combination of a multi-turn actuator SA and a linear thrust unit LE. |
|
Description standard features
intermittent duty S4 / S5 min.25% duty cycle, 1200c/h
acc. to DIN EN 60034, protection class IP67
motor insulation class F, temp. range -20°C to +60°C
(-4°F to +140°F)
non intrusive for PROFITRON (after adjustment of the
end positions of the valve)
hand wheel for emergency operation (disconnected
during normal operation)
PROFITRON: 3 reference force-stroke of the valve can
be stored
electronic motor protection, automatic phase sequence
correction
frequency range of the power supply 47 to 63 Hz
24 V DC supply for electronics unit possible
analog actual position value (0/4...20mA)
travel limits continuously adjustable
force dependent cut-off adjustable in 10% steps from
70% to 100% Fmax.
travel speed adjustable in 7 steps,
step-up distance factor 1.4
self-acting cut-off (depending on cut-off force, travel
distance, etc.)
soft starting for high positioning accuracy (starting
current less then rated current)
indication that actuator is in operation
separate mounting of the electronics unit possible
external screws stainless steel
documentation in German/English: operating instructions
programming by customer possible |
|
Modulating actuator 2SB6...
Force 2 to 25 kN
Stroke 10 to 100 mm
positioning speeds 13,5 to 50 mm/min
Standard design
intermittent duty S4 min. 30% duty cycle max 600 c/h
S5 min. 30% duty cycle max 600 c/h
optional: short-time duty S2-2 min for open-loop control
duty acc. DIN VDE 0530, part 1
Temperature range 20 to +60°C
Protection class IP 65 acc. to DIN 40050 / IEC529
hand wheel for emergency operation (disconnected
during normal operation)
preloaded belleville springs to maintain the closing force
->Minimum axial driving rod vibration in case of
unfavorable flow conditions in the valve
double-acting, coercive controlled, load dependant
tripping in the end positions and the stroke
->Damage protection for the valve in case of eg.g debris
between the valve seat and the valve trim
absolute self-locking of the driving rod
optional position electronics |
|
Oden electric valve actuator for linear applications.
High precision.
Fits all types of valves.
Voltage 24 VDC. Analogue control 4-20 mA or digital.
Force up to 16 kN. |
|
Oden electric valve actuator ATEX for linear applications.
High precision.
Fits all types of valves.
Voltage 24 VDC. Analogue control 4-20 mA.
Force up to 12 kN. |
|
| ... products without technical information |
| |
Designed specifically for use in hydraulic and pneumatic actuator
applications, where the transducer is fitted inside the pressurised
environment. Can operate at pressures of 670 Bar and temperatures of +200C.
Seperate electronics module operates from 10-60Vdc.
Available in a choice of mounting styles (Internal or External), these
transducers can be supplied to suit actuator strokes up to 2000mm.
|
|
The controls are the units used when you want the LINAK system to perform a movement. They determine whether the control box make the actuator move in or out. There are more variants of LINAK controls such as handsets, Foot Switches, Desk Panels and attendant control panels.
All the handsets are available in both black and grey.
|
|
|
|
see the results for the following category