|
|
PRONAL lifting cushions can be used to lift loads of over 70 tonnes and are particularly useful in areas such as civil protection, security and defence.
They are also used in maintenance operations on construction sites and in various industries for moving, blocking and handling operations... Made from elastomer-coated fabrics, the cushions are vacuum vulcanised at a temperature of 140°C, thus ensuring that they are extremely tough.
Advantages :
- easy to install, thin when empty,
- uniform lifting power,
- high degree of control during lifting, progressive lifting process,
- high lifting force.They are also used for maintenance purposes on site and in industries for some operations as moving, stalling, handling...
|
|
|
If an ECO-Jack toe jack can not be operated, the load can be lifted with an ECO-Jack AIR lifting bag ranging from 1.000kgs (2,200lbs) to 42.000kgs (92,800lbs). Fitting into the tightest areas with a collapsed height of 30mm (1.1-1.2inches), all models are light weighted and equipped with serrated lifting surfaces, markes centers, reinforced edges and safety instructions.
|
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks.
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.
|
|
INFLATABLE JACK
1-74 Ton
Highly flexible and lightweight jacks only require an air supply of 8 bar maximum. Any non-explosive gas or water can also be used for inflation.
Uninflated jacks are only 25,4 mm thick, making seemingly impossible lifting tasks routine.
Space age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 8 bar.
In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 12 bar.
Large surface area and material flexibility allow jacks to lift loads on soft or ompressible surfaces without support cribbing being necessary.
|
|
Lifting devices
Lifting - Freeing - Cleaving
Mustlift is able to lift safely heavy loads on the ground or in water. Their compact size, allowing to place them quite everywhere, is obtained by a simple vulcanization of a high resistant elastomer coated fabric. They can be used on irregular surfaces thanks to their positive grip surface.
Mustlift lifting bags can be inflated with air or water at maximum 8 bar.
High-pressure flat lifting bag, made from coated fabric (polyester or aramid) vulcalized in one operation. Lifts up to 76 T in the standard range. Anti-slide coating
|
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc.
|
|
Extruded Flat Lift Table
EF1-based, guided cylinder with four shafts for maximum rigidity. It is designed for lifting applications where other non-rotating cylinders cannot handle an overhung load and space is at a premium.
Four-shaft support withstands offset loads and moments.
Simple, efficient design provides economical alternative to other costly guided actuators.
Joins the EF family of products, so shares all the same benefits--long service life, low friction operation, fast delivery.
Convenient wide tooling mounting surface.
Intended for vertical lifting applications (should not be mounted horizontally or with tooling plates facing down).
|
|
For guided lifting and lowering of the workpiece.
The lifting movement is effected power-supported by a hydraulic or electrical actuator against the weight of the workpiece.
The lowering movement is a defined lowering by use of the weight.
For maximum workpiece weights of 100 to 1,000 kg.
Maximum strokes from 200 to 940 mm.
|
|
|
|
|
|
LINAK has launched a wide range of lifting columns to be used in various sectors with the purpose of improving ergonomics at different kinds of workplaces.
LINAK lifting columns allow applications such as
desks
tables
beds
kitchen units and
heavy-duty industrial workbenches
to be raised, lowered or tilted by means of a button. With the LINAK lifting columns it is possible to install sophisticated motorised systems that provide optimum ergonomics at a modest price.
Compared to the lifting columns mentioned, LINAK does manufacture columns used for vertical lift of hospital and care beds where design, easy cleaning and ergonomics are important factors.
LINAKs several different types of lifting columns are for instance LC2, LP2, LP3, DL1, DL2, DL4, DL5 and DL6.
LP2 and LP3 are used in the hospital and care sector for height adjustment of e.g. stretchers, incubators and surgical chairs. The LC2 is a further development of the LP2 and LP3. Besides the applications mentioned above LC2 is also a good choise in more industrial applications.
DL1, DL2, DL4, DL5 and DL6 are part of LINAK's DESKLINE® system for ergonomic sit/stand office desks. DL1, which set the standard of the market, is compact and avaiblable in more colours. The DL2 system offers a progressive speed control, meaning you have the same speed level both upwards and downwards. The DL5 and DL6 are further developing the DL1. DL4 is also called the DESKPOWER™ system.
At the touch of a button the DESKPOWER system can adjust desks within a range of adjustment from 60-125 cm at a high speed level irrespective of load. At the same time the noise level is extremely low.
|
|
Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology.
Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns.
|
|
Electric Lifting Columns from LINAK
In the lifting column, the guide and electric linear actuator are integrated. With the electric lifting columns from LINAK it is possible to install the sophisticated motorised system that provides optimum ergonomics in a range of applications. Electric lifting columns from LINAK are designed to raise, lower or tilt:
beds (hospital beds, care beds and home beds)
desks
incubators
industrial workbenches
kitchen units
tables
stretchers
surgical chairs
and more
Lifting columns for hospitals, care, industry, office and home
Some series of electric lifting columns are in particular designed to meet the needs of the hospital and care sectors, the office furniture market, the industry and the comfort furniture market.
|
|
|
|
|
|
LINAK has launched a wide range of lifting columns to be used in various sectors with the purpose of improving ergonomics at different kinds of workplaces.
LINAK lifting columns allow applications such as
desks
tables
beds
kitchen units and
heavy-duty industrial workbenches
to be raised, lowered or tilted by means of a button. With the LINAK lifting columns it is possible to install sophisticated motorised systems that provide optimum ergonomics at a modest price.
Compared to the lifting columns mentioned, LINAK does manufacture columns used for vertical lift of hospital and care beds where design, easy cleaning and ergonomics are important factors.
LINAKs several different types of lifting columns are for instance LC2, LP2, LP3, DL1, DL2, DL4, DL5 and DL6.
LP2 and LP3 are used in the hospital and care sector for height adjustment of e.g. stretchers, incubators and surgical chairs. The LC2 is a further development of the LP2 and LP3. Besides the applications mentioned above LC2 is also a good choise in more industrial applications.
DL1, DL2, DL4, DL5 and DL6 are part of LINAK's DESKLINE® system for ergonomic sit/stand office desks. DL1, which set the standard of the market, is compact and avaiblable in more colours. The DL2 system offers a progressive speed control, meaning you have the same speed level both upwards and downwards. The DL5 and DL6 are further developing the DL1. DL4 is also called the DESKPOWER™ system.
At the touch of a button the DESKPOWER system can adjust desks within a range of adjustment from 60-125 cm at a high speed level irrespective of load. At the same time the noise level is extremely low.
|
|
Light, elegant aluminium profile with a very quit run (<40db)
Are used especially in the medical sector (Ophthalmology, Ultrasound)
Columns of these types can also run in parallel (large tables, ergonomic work)
Big Advantage: Plug and Play
Most of our columns, we call Plug and Play. After receiving the column, attach it to the network power and with the delivered hand switch, you can use the column immediately.
Application: Adjustable chairs and tables, adjustable tables for computer, lecterns and so on
Force: up to 2200 N
Electric current: 230V / 50 Hz
120V / 60 Hz
100V / 60 Hz
Multifunction (all Electric current are possible in one column)
Custom Option: on request
EN 60601-1 certificated
All Materials are recyclable
|
|
| ... products without technical information |
| |
The application needs in practice are so manifold like the bandwidth of the lift gates and lift fields from the HGB GmbH.
Within the different type series widths up to 9.000 mm and lift heights up to 6.000 mm can be realized. Hereby, we especially focus on the aspect of security. An electronic chain breakage monitoring, a connecting block along the closing edge, and a mechanical fall arrester of multiple supporting appliances according to the norm EN 12604 (Appendix B) serve as a safety device in context with the power operated lift gates and lift doors. A complete documentation self-evidently belongs to a complete project perimeter.
|
|
Advantages
Pneumatic clamping with high forces
Optimum safety clamping - if the pneumatic fail the system is locked
The values of hydraulic clamps are reached and exceeded
Low system costs in comparison to hydraulics
Simple installation
Compact design
Wide range for many shaft sizes can be delivered
|
|
The SITEMA Safety Brake type KSP is designed to hold a vertical moved mass in one direction (against gravity). The holding is done on a round shaft. This could be an already existing cylinder rod or a separate rod. The Safety Catcher can also be used to catch the falling load in case of an emergency-stop. The holding force is relatively big in one direction (downwards) and in the other direction (upwards) relatively small.
Safety brakes are already used in the following applications
- vertical or diagonal machine tool axes
- vertical axes of loaders
|
|
| ... products without technical information |
| |
ACI scissor docks are specially designed to solve the problems of height difference between docks and trucks. They allow easy loading and unloading operations, whatever the height of the dock or truck bed, even when you do not have a loading dock.
This solution provides a permanently level board and more important course than with a dock leveller.
Our scissor docks are CE certified and comply with EN 1570 standard, as well as "Machines n°98/37/CE Directive".
The board is made of non-slip steel treadplate. The design of these boards enables them to withstand static or dynamic loads such as trolleys, pallet trucks, all types of forklift trucks...
The scissor docks are usually pit mounted, therefore providing access from dock to truck or dock to yard.
|
|
|
|
|
|
Autoquip Dock Scissors Lifts include several designs of powered loading dock equipment for moving wheeled or palletized loads onto or from delivery trucks of various heights onto or from your dock or grade level. Dock Scissors lifts can be surface mounted, pit mounted, or portable, and all meet the safety requirements of ANSI MH29.1.
Autoquip Truck Levelers are a superior dock solution to the traditional hinged dock-levelers or throw-over plates mounted onto the dock floor when faced with the challenge of loading & unloading trucks of varied heights. Hydraulic Truck Levelers are installed outdoors, in front of a dock or loading area, therefore not using valuable dock space. Truck Levelers also eliminate door security concerns and air loss is minimized in refrigerated or heated applications. Truck Leveler platforms can be provided with wheel guides, and are equipped with a provisional cut-out, to clear truck restraining devices, allowing the truck leveler platform to be located close to the face of the dock.
|
|
You can save the high cost of dock construction, work from any truck bed level to grade level and handle unstable loads quickly and safely with Dock Saver Lifts. These lifts can be installed indoors or outdoors and will handle all loads up to 20,000 lbs.
For applications where the height of the truck bed must be adjusted, Southworth also offers a line of extra heavy-duty truck levelers in capacities from 5,000 to 20,000 lbs. to meet even the most massive load requirements.
|
|
Widely used for warehouse and factory operations
- Especially designed for palletized loads transported by manual pallet trucks or powered pallet trucks
- Moving heavy equipment either onto or off a vehicle in a level mode
|
|
The Advantages of a U Turn Truck
U TURN TRUCK is a spinning platform. No maneuvering area necessary.
Turn around safely without backing up
Use your current maneuvering areas to expand your sales area.
Position the truck towards different unloading docks
Unload a truck weighing over 50 tons and 59 feet long in an area smaller than 4,300 sq ft.
U-turns for 59 feet long and 50 ton trucks are daily hassles.
U TURN TRUCK is as easy as pushing a button
U TURN TRUCK is patented and passed safety checks.
|
|
The SB300 S is a truck-mounted kit, normally fixed to the chassis frame. It can also be engineered for a demountable application. This model is suitable for commercial and military uses.
The truck can be a 6x4 or an 8x4 axle model to support the container weight. The hydraulic system of the truck-mount is PTO /pump driven.
This kit comes with an internationally approved radio remote control, and can also be supplied as a cable remote with a 10m cable.
The SB300 series can also handle transfers to other vehicles.
|
|
TRIPLE-L® trailers feature the innovative Power Deck® System which provides more efficient loading and transporting of your payload. These trailers eliminate the use of cumbersome ramps or tilt beds by hydraulically lowering the entire deck to ground level. Your payload is then loaded by driving, pushing, or placing it straight on to the deck, which is then lifted into the transport position. TRIPLE-L trailers are available in Flatbed, Utility, or Enclosed configurations with capacities ranging from 2,200 – 10,000 pounds. These trailers are ideal for payloads that have low ground clearance, poor gradeability, unique wheel configurations, and applications where frequent loading and unloading are required.
|
|
|
|
|
|
TIPPING LIFT TRAILERS
CASE EQUIPMENTS
> 1 Very thick stainless steel or painted steel monocoque case.
> 2 Right and left side with supports realised by pressing.
> 3 Panels in front and in the back also pressed.
> 4 Anti-swirl peripheral superior supports.
> 5 Stainless case strips or epoxy, welded on the case.
> 6 Headings consolidated by stainless or steel wire stretcher, welded on the case strips.
> 7 Anti-splashes cover flaps on both sides of the door.
> 8 Anti-deformation door supports.
CHASSIS EQUIPMENTS
> The structure of the chassis is done in sheet steel with a thickness of 8 mm.
> The chisels are done in rectangular profile steel.
> The cradles and the supports of jacks are also very thick, in order to avoid any deformations.
> Adjustable arrow 2 positions.
> Screw crutch.
> Hydraulic dumping by hoses.
> Anti-scrap protection on jacks.
> Parking brake.
> Lighting in conformity with the law in vigour.
> Hydraulic braking on models BBE 60 and 60.
FOR OTHER OPTIONS AND DIFFERENT MODELS, PLEASE SEE THE DATA SHEET OR CONTACT THE COMMERCIAL DEPARTMENT...
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
