|
|
Linear Thrusters Pneu-Moment
For smooth, guided motion. A durable housing with guide shafts keeps our Linear Thruster from rotating and allows it to carry higher loads. Choose from two different models. A choice of stroke lengths and a wide variety of catalog options make the Bimba Linear Thrusters easy to use and ready to order.
The Benefits of the Linear Thrusters Pneu-Moment Include:
Bimba stainless steel body air cylinders for long, reliable life
Optional magnetic piston for use with Hall Effect or Magnetic Reed Switches
Optional adjustable cushions for smooth deceleration of load at end of stroke
Optional internal or external bumpers to absorb shock or adjust stroke
Easily accessible ports
|
|
|
High load weight vs extension. Five bore sizes from 3/4" (20mm) to 2" (50mm). Stroke lengths up to 12" (305mm), Base or side mount. Linear ball or composite bearings. Options include switches, shock absorbers, stop collars and bumpers.
|
|
Rod Lock Cylinders
* The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut-down.
* The rod lock air cylinder has dowel pins that ride in the cam groove. When air pressure is present, piston actuates and dowel pins follow cam to open position, allowing piston rod to travel freely through clamp. In the absence of pressure, the spring actuates the piston and dowels follow to closed position, activating the rod clamp.
* The Rod Lock is not a safety device. It cannot be used for intermediate stopping; the cylinder is designed to prevent drift from a stationary position.
* Load weight must not exceed the stated holding force for the cylinder.
* Bore sizes are 3/4", 1-1/16", 1-1/2 ", and 2".
|
|
TRD Manufacturing
TRD Manufacturing Cylinders are recognized for their durability, high quality construction and long-lasting performance. Manufactured in several different types including, NFPA-interchangeable cylinders, specialized cylinders and accessories, TRD Cylinders represent a significant step towards Bimba's strategy to expand their industry-leading line of actuators.
Advantages of TRD Cylinders Include:
* Space saving design
* Many cylinder options to choose from
* Precision designed to provide accurate linear movement and positioning
* Other models include all stainless steel (SS) and electroless nickelplated (EN), and low friction for smooth operation (LF)
|
|
|
|
|
|
Custom Thrusters
With over 30 years experience in the automation industry, we at Ultramation understand the challenges faced by today's engineers and we recognize that a standard "off the shelf" unit does not always meet the need. Our specials range from simple modifications of standard units to complete customized solutions. We are versed in utilizing various materials and finishes in order to accommodate specific design and operating environment demands. We also offer both 2D and 3D design capability and our service and quality is unsurpassed.
Early in the design phase, we work closely with the customer to thoroughly understand the requirements and expectations. Once the design is finalized, documentation is provided for both design confirmation and future traceability. Customers can rest assured that their customized design will be available in our document control system for years to come.
Our design and fabrication experience enables us to provide competitively priced custom solutions and fast delivery. Quantities can range from 'one-of' designs to high volume production. We welcome the opportunity to quote these special applications because we recognize that today's special might well be tomorrow's standard.
|
|
The Two Shaft Linear Thrusters offer a compact design while offering maximum design flexibility. They feature two precision guide shafts that provide non-rotational linear guidance and high load capacity. Replaceable linear ball bearings are standard and provide long life, high load capacity and low-friction service. Optional composite bushings and chrome plated stainless steel guide shafts provide a solution for more challenging environments. A stainless steel option is offered for wash down applications.
The black anodized precision machined housings are designed for replaceable stainless steel or aluminum body nose mounted cylinders. Cylinder options range from magnetic pistons to dry service. Other options include position sensing, counterbored or tapped short or long tooling plates, auxiliary mounting plates, and external bumpers or hydraulic shock absorbers.
|
|
|
Tie Rod Cylinders feature the patented Enersorb® piston which provides exceptionally low breakaway, high energy absorption and reduced noise output. The floating bearing design allows for minor misalignment and surperior wear characteristics.
|
|
NOTES:
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1' to 'C dimension.
2. Switch bracket mounts by strap to cylinder; place as required tor access and signal phasing
|
|
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1" to 'C dimension
2. Switch bracket mounts to tie rod place as required for access and signal phasing.
|
|
| ... products without technical information |
| |
* clamp is fixed or slides in T-slot of press
* variable span up to 15 mm
* adjustable or fixed (type BTSA)
* custom versions up to 400 kN
* replaces conventional bolt-and-nut clamping
|
|
|
|
|
|
At the very latest when, because of a power failure (intentional or not) or a malfunction something has to be done to safeguard man and machine, hydraulic clamp Ratio-Clamp® - the clamping device from Hänchen - is just what you need.
Boasting a retention force of up to 450 kN, the hydraulic clamp holds the piston rod in whatever position it is in at that particular moment. Without having to rustle up some extra power (no extra energy) and for an unlimited period of time. The clamping device Ratio-Clamp® is approved by the German Technical Inspection Agency (TÜV). Nor does the development of specific solutions (larger rod diameters, intermediate sizes, greater clamping forces…) pose a problem to the Hänchen specialists.
The possibilities for your application:
Rod-Ø from 10 - 140 mm,
clamping forces from
1 - 450 kN. Other
dimensions on request.
Other products of the range of services:
- Hydraulic cylinders
- Test cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts/assembly utilities/accessories
|
|
PClamp clamps and brakes rod loads safely amd quickly. It can be adapted to standard systems such as pneumatic cylinders from leading manufactures (e.g. SMC, Festo= or to individual solutions. Rotatory clamping can also be achieved with PClamp. Certified systems from Employer's Liability Insurance Association can be realised.
Area of application:
Linear rails and guide ways
Clamping of linear axis
Swivel tables
Rotary tables
Spindles, feeders
Rod, piston, spindle clamping
Elevating devices
Hydraulic presses
Hydraulic lifts and elevating tables
Safety catches
Blocking systems
High-lifting devices
|
|
|
Safety Locks similar to Safety Catchers and Safety Brakes are used against failure of lifting members. But in contrast to those they are not suitable to decelerate masses or to dissipate kinetic energy. On the other hand, the rod displacement to build up the holding force is very small, so that this units can be used for a approximitive positioning tasks as well. Furthermore this design principle allows compact solutions even for small rod sizes (smaller than for Safety Catchers). In the field of pneumatic clamping devices the Safety Locks are providing the absolutely highest holding forces in relation to housing dimensions.
|
|
Active without pressure – incredible holding force
The pneumatic Clamping and Braking Element for piston rods RB.
The RB series is based on our proven wedge slide gear principle and is used for clamping and braking without pressure.
This element was developed for deployment on round-shaft guides or piston rods with a surface hardness of min. HCR 54.
The compact design is suitable for shaft diameters of Ø10 to Ø60 and allows holding forces of up to 60,000 N at a pneumatic opening pressure of just 4 bar.
As a specific feature no reset is needed for restarting.
The RB series stands out for its short reaction times. Even in vertical deployment, short braking distance are achieved in less than 30 ms
|
|
The safety clamping unit "System RINGSPANN" clamps piston rods of hydraulic or pneumatic cylinders independent of the direction of movement. It clamps with disc spring force and is released by hydraulic or pneumatic pressure.
The units are fitted to cylinders ond other machine parts with a connecting flange.
Applications:
Securing presses during tool changing
Positioning of winch installations and rollers
Securing of hydraulic/pneumatic adjustments
Securing of elevating platforms
Securing of working cylinders, even under water
|
|
Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.
|
|
|
|
|
|
Features:
Dimension of obstruction according to ISO 6020/2, DIN 24554 and NF/ISO 6020/2
Diameters of boring: 25 to 200 mm
Diameters stem: 12 to 140 mm, except CDT3: 28 to 140 mm
Pressure rating: 160 bars
Race until: 2700 mm for CDT3 and CGT3, 1400 mm for CST3 according to fixing and diameters stem/piston, pressure operating and principle of use
13 types of fixing
Range CGT3 is based on range CDT3 equipped with a double stem. Range CST3 is based on range CDT3 but has a position encoder without contact. The position encoder is planned for exit analogical (0 -10 Volts or 4.-20 my) or digital display IF. Possibility of flasquer a base plate gauges 6 or 10 directly on the jack.
Advantages customers:
Proximity: made in France
Guide screwed, facilitating the interventions of maintenance
Damping autorégulé or adjustable with the choice
Purge patented safety, facilitating and making safe the purging
Facility of assembly thanks to the positions freely sélectionnables of the openings on head and bottom
The throats of housing of the joints on the piston answer the ISO 7425-2 and are identical for the types of joint M, T and V, i.e. an exchange of joints is easily realizable without changing the piston.
|
|
Hydraulic cylinder (UHD, UHSZ 100/ 160, UHSZ 250)
in accordance with the currently valid ISO and DIN regulations.
In addition, standard cylinders up to 250 bar. In line with customer requirements we also develop special cylinders according to quite individual specifications.
All cylinder versions can be produced as serve cylinders or fitted with an integrated position measuring system.
|
|
|
Switch mounts by strap to cylinder, place as required for access and signal phasing: R (Sink) or S (Source) switches only
|
|
|
Cylinders with tie-rods, providing an alternative to the V160C series in case of use with high pressures and temperatures. They are extremely reliable and sturdy.They can be fitted with adjustable magnetic end stroke switches. Ideal with die-cast molds.
|
|
- Mounting of head and cap according to the tie rod principle
- Service-friendly modular system
- Small installation dimensions
- Various mounting types
- Interchangeability thanks to standardization
- Industry-specific and project-related cylinders on inquiry
|
|
|
2PACK double point double sided presses are the result of a long and fruitful cooperation with our customers. A welded and stress-relieved monobloc frame, a generously dimensioned drive and a long high-precision ram guiding system ensure perfect mechanical operation. The absence of structure below floor level avoids the need for special masonry work, while still providing an ergonomic working height. The tool zone is designed to receive an enormous diversity of tools, especially follow-on tools.
|
|
Double point connecting rod eccentric presses for different cold stamping utilization: cutting, stamping, punching, bending, calibration, sizing, etc.
Press features:
State-of-the-art electronic control by SIEMENS.
Visual indication of current operation
Visual indication of main characteristics
Press meets all safety standards:
European standards for mechanical presses EN 692
Instruction for safety work UVV.11.062
Hydraulic safety device
Automatic change of stroke
Motorized adjustment of carriage position
Roller guides of carriage or
Sliding guides of carriage
Longitudinal shaft or
Transverce shafts
CE approved
|
|
Standard Features
• Hydraulic Clutch and Brake Providing Fast Starting and Stopping.
• Four-Piece Tie Rod Construction Frame.
• Single-Geared Drive with Opposed Twin Helical Driving Gears. (DAC Presses)
• Large Air Bag Pnuematic Counterbalance Cylinders on Inner and Outer Slides.
• Minster patented "Monitorflow" Recirculating Oil Lubrication System.
• Die Plumbing Regulators and Manifold for Front and Rear of Press.
• Air-Operated Flywheel Brake.
• Press Arranged for Front and Left Mounted Feed.
• Quick Lift in Outer Slide for Quick and Easy Die Access (DAC-H200)
• Integral Dynamic Balancer. (DAC-H200)
• Flywheel Drive Providing Higher Speed Capability (DACH Presses)
• Precision Slide Guiding System.
|
|
| ... products without technical information |
| |
MarStand Indicator Stand 815 MG with flexible stem
- Flexible in any direction, arm can be locked in position
- The sleeves and grounded steel balls of the stem are compressed with a strong steel cable
- Indicating instrument can be rotated through ± 90°
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
