|
|
|
Series mini-distributor LS04 M8 Connector industry, Ø4 connection, Ø6 XS 30 gr. 200 Nl/min AF 51 gr. 330 Nl/min Systems compact carry-distributor VTS LS04 330 Nl/min
|
|
Flow rates: 360 to 700 l/min
Widths: 10 and 20 mm
Variability: flexible compressed air supply, variable pressure zones, additional supply at any desired location.
Serial valve actuation - up to 32 valve positions or 64 solenoid coils
Open for Profibus-DP, Interbus, CANopen, DeviceNet, CC-Link
Pressure range: -0.9 to 10 bar
Protection: IP 65
Electrical I/Os and fieldbus connection with modular, electrical CPX terminal
|
|
Camozzi offers a large range of valves and solenoid valves with varying dimensions for use in different types of equipment. The components have been produced for single use and for mounting on manifolds or sub-bases, and each size has been designed to give the most effective performance possible.
A large number of voltage and coil options are available within the solenoid range satisfying most requirements.
|
|
The all-rounder. Tried and tested a million times the world over: comprehensive range with 5/2- and 5/3-way valves.
• Flow rate up to 2,000 l/min
• V solenoid coil: low power consumption
• F solenoid coil: ex-protection, freely selectable voltage
• Side or front mounting
|
|
THREE-WAY VALVES :
with conical valve shutters, they ensure excellent flow capacity
MONOSTABLE OR BISTABLE THREE-WAY SOLENOID VALVES :
they can be fitted in a vacuum circuit operating in N.O. and N.C. They insure excellent flow capacity and reduced switching times. They can manage a continuous counter jet on the third release to facilitate release of suckers. The bistable (safety) version ensures that the vacuum is maintained both with lack of power and pressure in the servo-pilot.
|
|
General Description:
A range of heavy duty 4/2 + 4/3 solenoid, pilot manually operated 'Fluoslide' directional control valves in stainless steel for use on gases.
- Heavy duty. High flow. Critical applications.
- Hazardous area solenoids.
Operating Fluids:
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water (details on application).
|
|
Actuating solenoid with built-in electronic timer. Two potentiometers
and two slide switches in the terminal box allow flexible adjustment
of pulse and interval duration. When the power is switched on, there
is a delay of about 1.5s before the valve is opened for a preset pulse
duration.
This is followed by a break (Pause). The durations involved are
generated by a microcontroller.
The power supply may be interrupted to carry out an operating test
without waiting for the break. The (N) terminal can be used to
operate the built-in solenoid independently of the cycle set, or to
operate an external "reference solenoid" in parallel with the internal
coil.
The 110/120V version's solenoid coil is operated by means of an
integral bridge rectifier. In this case external solenoids can only be
supplied with power using an additional rectifier.
|
|
All EV-,ET- and EC-series electronic valves with the "O-" option are available manufactured and assembled for use in Oxygen-enriched environments for applications that are extremely sensitive to contamination.
These valves are ultrasonically cleaned, assembled, inspected and tested in an enclosed controlled area with a state-of-the-art positive pressure filtration system.
Both organic and inorganic contaminants such as particulate matter and hydrocarbon oils are removed.
No organic sealants, adhesive or lubricants are used in the manufacturing process.
Feature FKM (fluorocarbon) seals.
Components parts are lubricated with Oxygen-compatible PFPE (perfluoropolyether) grease, only as needed for assembly.
Individual testing and inspection is accomplished utilizing compressed Nitrogen and ultraviolet light.
Products are double bagged in heat-sealed polyethylene bags.
|
|
|
Direct and pilot operated. DIRECT have the solenoid armature directly connected to the valve spool or poppet. PILOT use small integral direct solenoid valves to switch pilot air pressure to operate the main valve element.
|
|
Description
Corning Cable Systems distribution blocks of Series 5000 (8- and 10-pair functional elements are fitted with double IDC contacts and with and without option for protection) are used for both voice and data networks in the central office, cabinets and in private networks applications.
|
|
|
|
|
|
TORK PULSE VALVES,DUST BAG SHAKER VALVES,DIAPHRAGM VALVES.
DUST BAG COLLECTOR VALVE,
T-P Series Pulse valves gives high pressed air shock to bag filter in a short time, .
Pulse valves are two way and works like others solenoid valves. But they do not gives countinous flow.
Pulse valves are controled by electronic timer signal .timers gives signal in short time to each pulse valves.
applications:
air,dust bag filter,bunkers,dust extractor,electro static dying cabinnets filters,dust collector systems.
PULSE VALVE SERIES:
T-P Serisi ; integral control pulse valves,including coil unit 3/4"....up to 3" sizes.
working pressure:5...10 bar .
T-PB Serisi : remote control, (without coil unit) sizes.3/4"...up to3" .
T-PR Serisi : Coupling connection integral control, (without coil unit)pulse valve.
T-PRB Serisi : remote control,Coupling connection,diaphragm valve.
T-PF Serisi : Flange connection,integral control pulse valve.
T-PFB Serisi : remote control Flange connection, pulse valve
T-PUK Serisi : remote control solenoid group box,solenoid enclosure.
T-PZR Series : Pulse valve timer.
T-VFI ,T-VF2 : Vibro flow shaker
|
|
6 mm-slim diaphragm-isolated solenoid valve
KV Series
6mm Slim Design
This small valve enables you to reduce not only the installation space but also internal pipe length of your manifold by making it possible to mount at 6mm intervals.
- Capacity for Bilateral Connection
Easy to make manifolds
- Small Internal Volume
Only 10 micro liters (each port)
- Excellent Chemical Resistance
PEEK molded body and Perfluoroelastomer diaphragm
|
|
Model number YTV-2-1/4
Dimensions (mm) W40 x L50 x H77
Type 2way-NC
Orifice Diameter (mm) 3
Port Connection Rc1/4
Inlet Pressure (kPa) -100 - 150
Outlet Pressure (kPa) 0 - 30
Ambient Temp. Range 0 - 60
Fluid Temp. Range 0 - 60
Voltage (V) 100AC
Power Consumption (W) 5
Operating Duration Continuous Duty
Insulation Class E
Body Material PTFE
Seal Material PTFE
|
|
ISO-Standard ISO 5599/I (Series W60, W63, W64)
ISO 5599/II (Series W65)
ANSI-Standard (Series W70 and W74)
SAE-Standard (Series 80 and 84)
All piping is to the base, not the valve, for easy valve removal and servicing.
Other features:
Three constructions available:
poppet
stainless steel spool & sleeve
resilient seal spool
Valves are fully interchangeable with any other valves using a standard mounting interface
Compact design (manifold mounting system)
5/2- and 5/3-way valves in all sizes available
Port size up to G 1½
Flow rating up to kv = 22
Electrical connections provided by:
drop-cord plug (ISO 5599/I)
body-to-base / plug-in base (ANSI or ISO 5599/II)
3- or 5-pin connectors (SAE-Norm)
Variety of interposed control devices available.
|
|
|
|
|
|
2002 Series Valve
Modular reality, plug together flexibility in design! Sub-miniature 3-way and 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Electronic interface options include DeviceNet, Profibus-DP, 1771 Remote I/O, and DeviceLogix.
Standard Specifications:
Cv: 0.20 to 0.25
Port Sizes: 1/8 NPTF, 4mm, 6mm
5 ported, 2 & 3 position, 4 way
Flow Capacity: 11.5 SCFM @ 80 PSIG / 246 NI/m @ 6 bar
Operating Pressure Range: 28" Hg. Vacuum to 150 PSIG / Vacuum to 10 bar
Pilot Pressure Range: 35 to 115 PSIG / 2.5 to 8 bar
Temperature Range (Ambient): -10°F to 115°F / -23°C to 46°C
2004 Series Valve
Modular reality, plug together flexibility in design! Miniature direct solenoid and solenoid air pilot actuated valves. Manifold mounting with DIN rail option. Electronic interface options include DeviceNet, Profibus-DP, 1771 Remote I/O, and DeviceLogix.
Standard Specifications:
Cv: 0.35 to 0.40
Port Sizes: 1/8 & 1/4 NPTF, 4mm
Flow Capacity: 16 to 18 SCFM @ 80 PSIG / 345 to 394 NI/m @ 6 bar
Operating Pressure Range: 28" Hg. Vacuum to 150 PSIG / Vacuum to 10 bar
Pilot Pressure Range: 20 to 115 PSIG / 1.5 to 8 bar
Temperature Range (Ambient): -10°F to +115°F / -23°C to +46°C
|
|
Maximatic FRLs condition and prepare compressed air for use in fluid power systems. Pneumatic applications with properly conditioned air will operate longer, cost less and improve system efficiency. Clippard offers five different sizes from #10-32 to 1 NPT of Filter, Regulators, Lubricators and combination units. Their modular design and interconnecting brackets provide flexibility and facilitates simple field installation and/or modification.
Clippard's all-new Maximatic Solenoid valves are available in 2-,3- and 4-way configurations in port sizes from #10-32 to 1/2" NPT. Select either a direct-acting poppet or solenoid-controlled pilot operated balanced spool design. These electronic valves offer high flow in small package, and are constructed of aluminium, stainless steel and thermoplastic materials.
|
|
This series of solenoid valves is designed for use with compressed air and other neutral gases. The programme features products with threaded port connections ranging in size from M3 to G1/4. In addition, valves from all product groups can be manifold mounted for ultimate flexibility. The series is part of a comprehensive programme of solenoid valves with over 5000 body, seal and design variants.
|
|
|
|
|
|
CL18 & CL26
Our CL18 & CL26 Series valves offer a low-cost alternative! 4-way solenoid air pilot actuated. Conform to ISO 15407-1. Simple wiring connectivity using 17mm DIN connectors. Available on bar stock manifolds, up to 12 stations.
ISO 5599/2 & 15407-2 Series Valve
Numatics ISO series valves are high speed, heavy duty valves, designed for general service on all types of automation. Valves comply with ISO standard 5599/2 for valve unit to base interchangeability. Direct solenoid and solenoid pilot actuated models available. They are true multi-purpose valves and employ the patented Numatics spool and sleeve assembly.
ISO 5599/1 Series Valve
Numatics ISO series valves are high speed, heavy duty valves, designed for general service on all types of automation. Valves comply with ISO standard 5599/1 for valve unit to base interchangeability. Direct solenoid, solenoid pilot and air pilot actuated models available. They are true multi-purpose valves and employ the patented Numatics spool and sleeve assembly.
|
|
- for standard applications (Series D27)
- for special applications (Series D21)
Can be mounted close to the actuator, reducing length of pipe to be pressurized/exhausted on each cycle.
Other features:
"Self-cleaning" poppet design
Available with different internals for three different temperature ranges
Five flow patterns are available:
2/2-way, normally open/closed
3/2-way, normally open/closed
4/2-way
Port size up to G 2½
Flow rating up to kv = 61
Long service life. Very often these valves "survive" the machines they are used in.
LOGICAIR® adaptors provide special functions, e.g.:
Timed sequence adaptor
Air-Index-Adaptor (allows a single control valve to function as an impulse controlled, detented valve)
"PB"-adaptor (for higher actuation force)
|
|
|
Drawer valves to elettropneumatico drive. 3/2-5/2-5/3; attacks G1/8-G1/4-G1/2. Tensions 12V DC 24V DC, 24V AC, 110V AC, 220V AC
|
|
Solenoid valves
* NC/NO single solenoid valve (coil: 22 mm) - G1/8" threaded ports
* NC/NO single solenoid valve (coil: 22 mm) - G1/4" threaded ports
* NC single solenoid valve on CNOMO-base with manual override (coil: 22 mm)
* NC solenoid valves (coil: 22 mm) on manifold without manual override
* NC solenoid valves (coil: 22 mm) on manifold with manual override
* NC/NO solenoid valves (coil: 22 mm) on multiple sub-bases
* Single manifold for 15 mm NC solenoid valve
* Manifolds for 15 mm NC solenoid valves
|
|
* Fluid: air/inert gas
* Operating pressure: 1.0MPa
* Effective area (Cv factor): 6-8mm 2 (0.33-2.11)
* Coil rated voltage: 12, 24VDC; 100, 110, 200, 220VAC
* Ambient temp: -20° to 60°C
* Fluid temp: -10° to 60°C (no freezing)
|
|
Model number JTV-2
Dimensions (mm) Dia.14.5 x H34.1
Type 2way-NC
Orifice Diameter (mm) 1.2
Port Connection Barb Type
Inlet Pressure (kPa) 0 - 80
Outlet Pressure (kPa) 0 - 10
Fluid Temp. Range 0 - 40
Voltage (V) 12DC
Power Consumption (W) 1
Operating Duration Continuous Duty
Coil Temperature Increase 50
Insulation Class E
Body Material U-Polymer
Seal Material FPM
|
|
|
|
|
|
The Pneumatic Solenoid Valves 820 Series are NC 2/2 type.
The research about materials and new technological solutions allowed the realization of a shutter solenoid valve with an extremely simple operation principle and with avant-garde dynamic characteristics. The mass of the moving elements has been reduced to the minimum and every inner friction has been eliminated: in this way, we obtained response times of milliseconds and an operation life over 500 million cycles.
Due to the possibility of controls of speed-up type, their dynamic characteristics are even more improved. Standard solenoid valves with 24 VDC control have a response time lower than 5 ms in opening and 2 ms in closing, with a maximum operation frequency of 200 Hz. On the contrary, solenoid valves with speed-up control have a response time lower than 1 ms, both in opening and in closing, with a maximum operation frequency of 500 Hz.
Besides high-speed characteristics, solenoid valves 820 Series offer flow rate values up to 180 dm3/min. (ANR), with feeding pressure from 0 to 8 bar.
Controlling the valve through either PWM (Pulse Width Modulation) or PFM (Pulse Frequency Modulation) technique, it is possible to vary the passing flow rate and to obtain, in this way, a solenoid valve, having a proportional flow rate.
820 Series is available both in-line assembly and sub-plate version , equipped with such accessories as multi- position manifolds or speed-up driver boards.
|
|
|
|
|
|
Product Details
2/2, 3/2, 5/2, 5/3 Explosion proof solenoid valve
ATEX, CCOE, CMRI, DGMS, INMETRO Approved
Exd IIC T6 IP 67
AL & SS enclosure
We have complete range of Explosion Proof solenoid valves which are having following qualities,
•Different materials (Brass, SS316, Aluminium) available
•Larger range of orifices (from 0.8 mm to 80 mm)
•Solenoid with Explosion proof enclosure ( ATEX, INMETRO, UL, CCOE, ISI approved)
•Low power (5 W and 0.4W) solenoid coil available
•Intrinsically safe solenoid coils with circuit available
•All different constructions i.e. Diaphragm operated, Piston operated, Internal/ External Pilot operated, Spool design, Puppet design, Zero differential solenoid valves etc. are available
•Also Pneumatic and Magnetic Latching coil with Exd enclosure available.
•Also Manual Reset valves and Low power valves are available with Exd enclosure.
•We are famous for manufacturing custom made valves at very competitive price.
•We are the suppliers to Indian Railway, Power plants, Refineries, cement plants, Pharma, etc.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
