|
|
This spring-loaded safety valve with a very high blow-off capacity, labeled as D/G (models 352.00 to 352.30), will be used for protection of
pressure vessels and pressure systems for air and other neutral, non-toxic and non-combustible gases.
This design allows a usage to secure fixed pressure and vehicle tanks from dust and granular goods.
The valves only can be supplied with a preset pressure, the desired set pressure must be specified with the order. After setting, the valves are
labeled and sealed.
For functional testing, the safety valve can be opened by turning the knurled screw.
The bearing surfaces and seals can be cleaned from impurities by unscrewing the upper part without changing the pressure setting.
Repairs may only be executed by the manufacturer.
|
|
Air boxes
The AS-i AirBoxes are compact pneumatic valves, complemented by digital feedback inputs. They are integrated in a ClassicLine housing and are compatible in terms of space and mounting. The AS-i connection is carried out via the common flat cable or round cable lower parts. 3/2-way and 4/2-way valves are available.
|
|
|
Series mini-distributor LS04 M8 Connector industry, Ø4 connection, Ø6 XS 30 gr. 200 Nl/min AF 51 gr. 330 Nl/min Systems compact carry-distributor VTS LS04 330 Nl/min
|
|
LS-V15C
Proportional Pneumatic Control Valve
The LS-V15C is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
|
Camozzi has not neglected the importance of these valves especially as actuator performance depends essentially on the right choice of automatic valve. The range includes flow regulators, quick release valves, flow control valves, basic logic functions and silencers with different specifications in order to meet most requirements.
|
|
Flow rates: 360 to 700 l/min
Widths: 10 and 20 mm
Variability: flexible compressed air supply, variable pressure zones, additional supply at any desired location.
Serial valve actuation - up to 32 valve positions or 64 solenoid coils
Open for Profibus-DP, Interbus, CANopen, DeviceNet, CC-Link
Pressure range: -0.9 to 10 bar
Protection: IP 65
Electrical I/Os and fieldbus connection with modular, electrical CPX terminal
|
|
This range of valves includes operating devices suitable for most applications according to the space available. They are offered in a range of different dimensions: from M5 to G1/4 and in versions: 3/2, 5/2, 5/3 center open and 5/3 center closed.
|
|
- Position sensing of the hand lever position. Sensor assisted option for monitoring by a higher-level control system.
- Lockable hand lever. Reliable servicing and maintenance even during operation.
- Selectable connection direction and mounting options. Output connections downward or to the side.
- Robust construction with an excellent design. Plastic lever with metal or plastic housing permits operation in harsh environments.
- Can be used as a pneumatic master switch or a 3/2-way valve.
Pneumatic connection: M5, G1/8, G1/4 or G1/2
Nominal size: 4/6/8/12 mm
Temperature range: -20 ... +80 °C
|
|
This type of valves is offered with ports from M5 to G1/4 in different versions including 3/2 NC, 3/2 NO and 5/2 and with a variety of operators to meet a wide range of uses. The valves are available both with brass gate and with spool to satisfy most applications.
|
|
The Diaphragm Amplifiers are miniature interface devices which perform the same function as a piloted three-way valve, but at low outlet flow rates. Pneumatic signals of several inches water gauge applied to the input will control the output pressure up to 35 PSI in both digital and analog systems.
Diaphragm Amplifiers are very suitable for providing pneumatic signals to air-piloted valves for powering small cylinders. They are also used at fluidic signal levels for providing isolation and in timing circuits.
|
|
The Valves offer an adjustable pilot set point of 0.5 to 100 PSI. Normally open or normally closed valves are available; the valve pressure range is 22 to 116 PSI. Four mounting styles are available: Flush Mount, Manifold Mount, Panel Mount, and Pipe Threaded.
Vacuum Piloted Valves are also available.
|
|
Extremely small, extremely fast, extremely versatile: MH1 Miniature valves for powering miniature drives or as pilot valves for process valves. Switching status indicated by means of LED. Can be mounted on printed circuit boards.
• Width 10 mm
• Standard nominal flow rate 10 ... 14 l/min
• Voltage 5/12/24 V DC
• Switching times from 8, 5 or 4 ms
• Pressure range -0.9 ... 8 bar
• Protection class IP40
|
|
Less is more: compact Performance individual valves CPE, space saving and light weight for close proximity to or on the individual drive.
• Width 10 ... 24 mm
• Flow rate up to 3,000 l/min
• Voltage 24 V DC, 110 V AC, 230 V AC
|
|
Camozzi offers a large range of valves and solenoid valves with varying dimensions for use in different types of equipment. The components have been produced for single use and for mounting on manifolds or sub-bases, and each size has been designed to give the most effective performance possible.
A large number of voltage and coil options are available within the solenoid range satisfying most requirements.
|
|
|
The fine threads of the needle valve permit excellent adjustment for precise control of flow. The flow is restricted in both directions and is adjustable from 0 to the equivalent flow of a 0.025" diameter orifice. The 7-turn adjustment needle valves are available in two models, the standard model and the fine adjustment model. The standard adjustment model has a pin angle of 6° with 10-64 threads; the fine adjustment model has a pin angle of 4° with 10-80 threads.
|
|
Connection guaranteed: a wide range of functions and variants - always harmonised to the respective requirements.
• Exhaust air/supply air flow control or without non-return function
• Flow rate 15 ... 4,300 l/min
• Threaded connectors M3 ... G3/4
• Push-in fittings QS3 ... QS 12 or PK-3 ... PK-6
• Variants with increased corrosion resistance
|
|
LS-V05C
Proportional Pneumatic Control Valve
The LS-V05C is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
General Description
Uni-directional
316 Stainless Steel or Brass in-line flow regulators for uni-directional operation (free flow return).
Bi-directional
316 Stainless Steel or Brass in-line flow regulators for bi-directional operation (separate flow control in each direction).
Operating Fluids
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water.
|
|
|
|
|
|
Indirectly actuated valve series with manually and mechanically actuated valves.
- Flow rate: 120 l/min
3/2-way valve
- Normally closed or normally open
4/2-way valve
- Minimal actuating force with pilot control
- Can also be used as 2/2-way valve by plugging the exhaust.
- 4 actuator types: stem, roller lever, idle return roller lever, whisker
Normally closed or normally open by turning the housing top:
VS, RS, LS
Normally closed, actuator attachment at left (number 1 on attachment above number 1 on housing)
VOS, ROS, LOS
Normally open, actuator attachment at right above number 2
This whisker valve with extremely low actuating forces is particularly well suited for units where dissimilar parts or actuating elements without precision positioning need to be sensed, or where the actuating levels are different. The whisker can be approached from any direction perpendicular to the whisker axis, or can be passed.
- Mounting bracket HV-1/8
Scope of delivery: 1 mounting bracket, 2 M5x25 socket head screws per DIN 912, 2 hex nuts and spring washers
Can be repaired with wearing parts kit
|
|
|
|
|
|
|
Offering W60 Series, W68 and W88 Series, W80 Series, and W90 Series Single Seat Pneumatic Valves. WCB W60 series is a modular family of valves that are the ultimate in: easy cleaning, high pressure, low maintenance design. With 16 standard bodies, 12 different actuators, 5 stem types, and a wide range of control tops, the valves can be configured to precisely fit any application. The W68 and W88 Series consists of a modular family of "throttling or pressure control" valves that are the ultimate in: easy cleaning, high pressure, low maintenance design. With 11 standard bodies, 12 different actuators, 4 stem types, flush or standard adaptor, and a wide range of control tops, the valves can be configured to precisely fit any application. The W80 is a great solution for aseptic applications, this valve series utilizes a stem flush adapter to provide a liquid or steam barrier around the valve stem. When the product must be isolated from the external environment, the W90 Series valve is an ideal choice. This series valve utilizes a diaphragm adapter to provide a reliable, hermetic seal around the valve stem.
|
|
The all-rounder. Tried and tested a million times the world over: comprehensive range with 5/2- and 5/3-way valves.
• Flow rate up to 2,000 l/min
• V solenoid coil: low power consumption
• F solenoid coil: ex-protection, freely selectable voltage
• Side or front mounting
|
|
THREE-WAY VALVES :
with conical valve shutters, they ensure excellent flow capacity
MONOSTABLE OR BISTABLE THREE-WAY SOLENOID VALVES :
they can be fitted in a vacuum circuit operating in N.O. and N.C. They insure excellent flow capacity and reduced switching times. They can manage a continuous counter jet on the third release to facilitate release of suckers. The bistable (safety) version ensures that the vacuum is maintained both with lack of power and pressure in the servo-pilot.
|
|
General Description:
A range of heavy duty 4/2 + 4/3 solenoid, pilot manually operated 'Fluoslide' directional control valves in stainless steel for use on gases.
- Heavy duty. High flow. Critical applications.
- Hazardous area solenoids.
Operating Fluids:
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water (details on application).
|
|
M2d
Proportional Pneumatic Control Valve with Integrated Driver
The M2d is an instrument-grade, proportional, directional control pneumatic valve with an integrated driver. The M2d is powered by 24 Vdc and the onboard signal conditioning accepts either voltage or current command signals.
Features:
* Proportional
* Efficient PWM Driver
* High Speed and Flow
* Vacuum Capable
* High Linearity
|
|
General Description:
- Miniature 3 way, 2 position brass pilot valves. Air, manual or mechanically operated. Normally closed operation. Universal versions available.
- Compact. High flow. Sealed mid position during transition.
- Pilot operation of larger directional control valves or direct operation of single acting cylinders.
Operating Fluids:
- Compressed air
- Filtered and lubricated or non lubricated up to 10 bar (145 psi). ISO VG37 mineral oil (or equivalent) is recommended for use at normal ambient temperatures in lubricated systems.
Stroke:
- Nominal stroke of valve spindle 3.25mm
- Additional over travel 0.75mm approximately
Working Temperature:
- -10ºC to +75ºC (15ºF to 167ºF)
|
|
- Universal polymer valves with durable and reliable valve system.
- Fast, secure mounting and fixing of the valves on a stable metal manifold strip using a screw.
- Sturdy, economical and versatile. From the individual valve to the valve terminal.
- QS push-in connectors integrated in the valve housing for easy and secure mounting of the pneumatic tubing.
- Optimised capacity and wide range of flow rates from 200 - 1000 l/min.
- Assembled and tested units or individual components as modules for custom configurations.
Valve functions: 3/2-way NO, 3/2-way NC, 4/2-way single solenoid, 4/2-way double solenoid
Number of valve positions: 2 ... 12 valve manifold and 4 ... 12 multi-pin terminal
Protection class: IP 65
|
|
The TESCOM VT 3-way air operated valve provides high cycle life in a compact design in stainless steel or brass body construction with pressure ratings of 10,000 psi and 6,000 psi respectively. With its balanced poppet valve design, the VT minimizes seat wear in high cycle applications and can be actuated with a minimum/maximum range of 80 - 110 psi. The bi-directional balanced valve allows for versatility with flow direction and functions as normally closed, normally open and as a two source selector valve.
Advanced Features:
• 1/4" & 3/8" ports
• Cv = .75
• Balanced main valve
• Optional solenoid valve
• 3 way, 2 position
• Universal operation
• Leak tight integrity - Class VI shut-off (bubble-tight)
• Pneumatic & hydraulic applications
Typical Applications:
• Component pressure cycle testing
• Two source selector valve
• Fill and dump applications (e.g. airbag canister filling, gas spring filling)
• Emergency shut-off
|
|
The miniature Preset Flow Control is ideal for many applications involving pneumatic systems, including the control of cylinder speed.
The operation of the flow control is based on the movement of a small disc. The flat surface on one side of the orificed disc seals and permits flow through the orifice. The amount of flow permitted in the reverse direction is determined by the orifice size. In the forward direction full flow is permitted. The flow controls design allows a maximum supply pressure of 75 PSI with a minimum cracking pressure of less than 10” H2O. Orifice sizes are available from .004” to .040”.
|
|
Actuating solenoid with built-in electronic timer. Two potentiometers
and two slide switches in the terminal box allow flexible adjustment
of pulse and interval duration. When the power is switched on, there
is a delay of about 1.5s before the valve is opened for a preset pulse
duration.
This is followed by a break (Pause). The durations involved are
generated by a microcontroller.
The power supply may be interrupted to carry out an operating test
without waiting for the break. The (N) terminal can be used to
operate the built-in solenoid independently of the cycle set, or to
operate an external "reference solenoid" in parallel with the internal
coil.
The 110/120V version's solenoid coil is operated by means of an
integral bridge rectifier. In this case external solenoids can only be
supplied with power using an additional rectifier.
|
|
2, 3 port valve
4S1 series
4.5
M(D)3SA1
46
(small pneumatic valve)
M3GA
156
4G series
4.0 to 16
MN3GA
248
Pilot operated
soft spool valve
MN3S0
4.0
MN4S0 series
368
One side solenoid type
MT3S0
3.0
4K series
M3KA
516
M3MA0
3M series
0.1 to 0.5
686
(small pneumatic valve)
M3MB0
Direct acting
poppet valve
M3PA
1.9 to 5.4
3P series
710
M3PB
B * P51
742
Pilot operated
P/M/B series
0.45 to 0.84
poppet valve
(miniature pneumatic valve)
N * P512/3/4
746
|
|
|
|
