|
|
|
These light-weight pneumatic valves stand out for their solid, compact design, short response times and an amazingly high flow capacity. Designed as resilient-seal spool models, these valves are available in 3/2-, 5/2- and 5/3-way configuration for either solenoid or pressure control. Individual units can easily be assembled to form complete valve blocks requiring limited mounting space. Port sizes range from M5 through G 3/8.
|
|
Compact high-performance valves are always in demand. AIRTEC addresses this market with our technically and economically advantageous electromagnetic valves.
Put them to the test. You won't be disappointed.
Single solenoid valves
Double solenoid valves
5/3-way valves
Customer solutions
Manifolds and sub-bases
Available with external pilot supply
Customer specific solutions
|
|
|
Airflex Quick Release Valves provide rapid evacuation of pressurized air from pneumatic devices. They provide an exhaust port at the device rather than at the end of a long supply line and/or control component. Exhaust is rapid and positive as soon as there is a pressure drop in the supply line. Mufflers are available to reduce exhaust noise.
|
|
Model number JTV-2
Dimensions (mm) Dia.14.5 x H34.1
Type 2way-NC
Orifice Diameter (mm) 1.2
Port Connection Barb Type
Inlet Pressure (kPa) 0 - 80
Outlet Pressure (kPa) 0 - 10
Fluid Temp. Range 0 - 40
Voltage (V) 12DC
Power Consumption (W) 1
Operating Duration Continuous Duty
Coil Temperature Increase 50
Insulation Class E
Body Material U-Polymer
Seal Material FPM
|
|
|
|
|
|
The Pneumatic Solenoid Valves 720 Series are available in both NC and NO version. They include all innovations, which are present in Matrix solenoid valves, both in materials and operating principles.
They couple simplicity and reliability with high dynamic performance. Response times are of milliseconds range, while their operating life is over 500 million cycles. The Series comprises Vacuum versions designed for uses with vacuum technique.
Due to the facility to be speed-up controlled,dynamic characteristics become even more improved: standard solenoid valves equipped with 24 VDC control present response times lower than 5 ms in opening and 2 ms in closing, with a maximum operation frequency 200 Hz. On the contrary, solenoid valves equipped with speed-up control present a response time both in opening and closing lower than 2 ms, with a maximum operation frequency 300 Hz.
Besides high-speed characteristics, solenoid valves 720 Series offer flow rate value to 100 l/minute (ANR), with supply pressure from 0 to 8 bar.
720 Series is available both in line assembly version and on sub-plate and is equipped with a range of accessories such as multi-position manifolds and speed-up driver boards.
|
|
|
|
|
|
750 Series 3/3 presents a small-sized single body with four utilities, assuming, according to the different models, the following configurations:
In the present model, all the innovations offered by Matrix technology, this combines special dynamic performance to the simplicity and reliability of manufacture, are present. Response times are of millisecond range, while operation life is over 500 million cycles.
With a speed-up kind control, dynamic characteristics are even more improved. Standard 24 VDC control solenoid valves have a response time lower than 5 ms in opening and than 2 ms in closing, with a maximum operation frequency 200 Hz. Speed-up control solenoid valves have a response time lower than 2 ms both in opening and in closing, with a maximum operation frequency of 300 Hz.
Besides high-speed characteristics, 750 Series solenoid valves offer flow rate values up to 100 l/minute (ANR) for every single outlet, with feeding pressure from 0 to 4 bar.
For 750 closed centres series, a lot of accessories is available, such as IP 52 or IP 65 connectors, manifolds with different positions and speed-up driver boards.
|
|
|
|
|
|
The Pneumatic Solenoid Valves 820 Series are NC 2/2 type.
The research about materials and new technological solutions allowed the realization of a shutter solenoid valve with an extremely simple operation principle and with avant-garde dynamic characteristics. The mass of the moving elements has been reduced to the minimum and every inner friction has been eliminated: in this way, we obtained response times of milliseconds and an operation life over 500 million cycles.
Due to the possibility of controls of speed-up type, their dynamic characteristics are even more improved. Standard solenoid valves with 24 VDC control have a response time lower than 5 ms in opening and 2 ms in closing, with a maximum operation frequency of 200 Hz. On the contrary, solenoid valves with speed-up control have a response time lower than 1 ms, both in opening and in closing, with a maximum operation frequency of 500 Hz.
Besides high-speed characteristics, solenoid valves 820 Series offer flow rate values up to 180 dm3/min. (ANR), with feeding pressure from 0 to 8 bar.
Controlling the valve through either PWM (Pulse Width Modulation) or PFM (Pulse Frequency Modulation) technique, it is possible to vary the passing flow rate and to obtain, in this way, a solenoid valve, having a proportional flow rate.
820 Series is available both in-line assembly and sub-plate version , equipped with such accessories as multi- position manifolds or speed-up driver boards.
|
|
|
|
|
|
Product Details
2/2, 3/2, 5/2, 5/3 Explosion proof solenoid valve
ATEX, CCOE, CMRI, DGMS, INMETRO Approved
Exd IIC T6 IP 67
AL & SS enclosure
We have complete range of Explosion Proof solenoid valves which are having following qualities,
•Different materials (Brass, SS316, Aluminium) available
•Larger range of orifices (from 0.8 mm to 80 mm)
•Solenoid with Explosion proof enclosure ( ATEX, INMETRO, UL, CCOE, ISI approved)
•Low power (5 W and 0.4W) solenoid coil available
•Intrinsically safe solenoid coils with circuit available
•All different constructions i.e. Diaphragm operated, Piston operated, Internal/ External Pilot operated, Spool design, Puppet design, Zero differential solenoid valves etc. are available
•Also Pneumatic and Magnetic Latching coil with Exd enclosure available.
•Also Manual Reset valves and Low power valves are available with Exd enclosure.
•We are famous for manufacturing custom made valves at very competitive price.
•We are the suppliers to Indian Railway, Power plants, Refineries, cement plants, Pharma, etc.
|
|
... a step ahead of the solenoid valve.
Use Piezo-technology characteristics for your applications.
HOERBIGER progressive technology of Piezo valves is used successfully and approved since many years:
- Control high flow rates and pressure with minimum electrical output
- The compact shape , the low weight and absence of self-heating allow simple integration
- Short switching times and high dynamics improve the cycle times and productivity of your application
These features characterise the technology of the Piezo switching valves:
- Minimum power input
- Short switching times
- Long life span.
|
|
Reduced format - optimised flow - clean design: a fixed-grid valve terminal for the electronics and mechatronics industry. With a maximum of 16 manifold integrated valves in a 10 mm fixed grid.
• Width 10 mm
• Valves: 5/2-, 5/2-way double solenoid, 5/3-, 2 x 3/2-, 5/3-, 2 x 2/2-, 1 x 3/2-way with external air supply
• 4, 8, 12 or 16 valve positions
• Pressure range -0.9 ... 7 bar
• Standard nominal flow rate 170 l/min
• Fieldbus connection DeviceNet
• Protection class IP40
|
|
Standard valves with lateral Namur port pattern per VDE/VDI 3845. These solenoid valves are used with pneumatic drives with Namur port pattern in process automation applications.
- Flow rate: 1300 l/min
- Connection: G1/4
Voltages
- 12, 24, 42, 48 V DC
- 24, 42, 48, 110, 230, 240 V AC
- Electrically actuated valves
- 3/2-way valve
- 5/2-way valve
- Single solenoid with mechanical spring return
- Manual override
- Without solenoid coil and plug socket
- Standard plug
Features
- Simple flange mounting to DLP (COPAC) and DRD, DRE (COPAR) drives
|
|
|
Pneumatic distributor TC08: 800 Nl/min 5/2, 5/3 in G1/8. 800 Nl/min. Direct connection or associable DIN C or M8. Is appropriate for all the applications. Pneumatic distributor TC15: 1500Nl/min 5/2, 5/3 in G1/4. 1500 Nl/min. Direct connection or associable DIN C and M8. Is appropriate for all the applications. Great flow.
|
|
Modular Manifold
10-32 & 1/8 NPT 2, 3 & 4 Way Valve Series 3853
Composite Solenoid Valve, 2 & 3-Way
Normally Closed or Normally Open
Hex Body
1/8 & 1/4 NPT 2 & 3 Way Valve Series 38MP
Composite Solenoid Valve, 2 & 3-Way
Normally Closed or Normally Open
18 Series
1/8 NPT 2, 3, & 4 Way Valve Series 3953
Stackable Composite Solenoid Valve
14, M14 & 34 Series
1/4 & 3/8 NPT 2, 3 & 4 Way Valve Series 3500
1/4, 3/8 & 1/2 NPT 2 Way Normally Closed/Open
12, 12A, 12B & 38 Series
3/8 & 1/2 NPT 2, 3 & 4 Way Valve Series 3510
1/4, 3/8 & 1/2 NPT Composite 2 Way Normally Closed/Open
|
|
The spool valves and mini spool valves are available in ISO 1,2,3,4 and ISO 01,02 standardized and non-standardized versions. With pneumatic or electropneumatic control (integrated or via CNOMO pilots), they provide an extended service life of 30 million cycles.
The non-standardized versions give priority to:
- High size/throughput ratio
- Assembly in line or on multiple subbases
|
|
|
Camozzi offers a large range of valves and solenoid valves with varying dimensions for use in different types of equipment. The components have been produced for single use and for mounting on manifolds or on sub-bases, and each size has been designed to give the most effective performance possible.
|
|
Streamline and modular. Proven valve technology, easy to clean and corrosion-resistant for use in food processing zones - also available without control cabinet.
• Valves: 2 x 3/2-, 5/2-, 5/2-way double solenoid, 5/3-way
• Standard nominal flow rate 300 ... 650 l/min
• 4 ... 12 valve positions, 8 ... 24 valve coils
• Multi-pin connection, fieldbus connection DeviceNet
• Protection class IP65/IP67
|
|
5/2, 5/3 in G1/4. 1500 Nl/min.
Direct connection or associable DIN C and M8.
Is appropriate for all the applications. Great flow.
|
|
5/2, 5/3 in G1/8. 800 Nl/min.
Direct connection or associable DIN C or M8.
Is appropriate for all the applications.
|
|
|
Metal Work offers a full range of valves and solenoid valves to meet all the possible requirements regarding compressed air supply, cut-off and regulation. The range of conventional valves with in-line couplings is available in four different types of actuation: mechanical, manual, pneumatic and electro-pneumatic. Standard valves come with either pneumatic or electro-pneumatic actuation. A comprehensive range of accessories including bases, manifolds and adaptors makes this valve range extremely versatile. All solenoid valves can be equipped with low power absorption solenoids. A new type of Mini Valve serie Mach is available with multiple electrical connector as well as the provision for interconnection with fieldbus systems.
|
|
2005 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O and Profibus DP.
2012 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O and Profibus DP.
2035 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O, and Profibus.
|
|
A05/A12 ADEX VALVES
Miniature high flow body ported and manifold valves
5/2 and 5/3 configurations
Ultra fast response times
10mm and 15mm Body widths
Threaded or push-in connections
Single sub base or IEM manifolds
Low power solenoids
Collective wiring system
|
|
SX
The SX series unique design combines both solenoid assemblies (when using double solenoid 2/3 position) on the same side of the valve, opposite the ports, allowing for greater space savings and simplified wiring access. The SX series valves are available with numerous manifold options which allow for easier installation and improved operation.
|
|
Increasing costs in conventional wiring and piping helped fuel the advancements in valve terminals.
AIRTEC offers technically superior solutions to meet your industrial requirements while saving you valuable time and money.
Multi pin, ASInterface, Profi-bus and Device Net connections
Eliminates labor intensive wiring and piping
Common air supply
Compact in size
Customer specific solutions
|
|
The spool valves and mini spool valves are available in ISO 1,2,3,4 and ISO 01,02 standardized and non-standardized versions. With pneumatic or electropneumatic control (integrated or via CNOMO pilots), they provide an extended service life of 30 million cycles.
The non-standardized versions give priority to:
- High size/throughput ratio
- Assembly in line or on multiple subbases
|
|
Product Details
3/2 and 5/2 - 3/2 convertible solenoid valve
Working Pressure up to 20 bar
Body Material: AL, BR, SS
poppet and spool design
• Suitable for Direct mounting on Pneumatic actuators, Control valves etc.
• 3 Port versions for Spring Return Actuators.
• 5 Port versions for Double Acting Actuators.
• Mounting as per NAMUR.
• Conversion plate available for converting 5 Port to 3 Port Solenoid valves.
• Orifice: 2.2 mm - 6mm
• Pressure: 0 - 20bar (Direct Acting)
• Pressure: 1 - 10 bar (Pilot Operated)
• Manual Operation provision available
• Explosion Proof Solenoid enclosure (ATEX, CCOE, DGMS, CMRI, INMETRO approved)
• Weather Proof solenoid Enclosure (IP 67) with/ without Terminal Box
• Body Material: Hard Anodized Aluminum, Brass and SS316
• Latching, Manual Reset, Intrinsically Safe, Low power solenoid options available
• 3/2, 5/2, 5/3 Center Exhaust, 5/3 Center off etc options available.
|
|
| ... products without technical information |
| |
|
|
