|
|
|
Fisher Controls, Regulator Division is requesting the return of regulators per the July 10, 2007 IMPORTANT SAFETY NOTICE--REGULATOR RETURN. The regulators to be returned are the Type/Series HSR, 67C, 67CR, 67CF, 67CFR, and R622.
|
|
The FRL range is a complete line of components for the treatment of the compressed-air.
FILTER: Thread from 1/8 to 1". Filtration Grade from 5µm to 50µm. Maximum Pressure 15 bar.
REGULATOR: Thread from 1/8 to 1". Regulation Range from 0-2 to 0-12 bar. Max. Pressure 15 bar.
FILTER REGULATOR: Thread from 1/8 to 1''. Regulation Range from 0-2 to 0-12 bar. Filtration Grade from 5µm to 50µm. Max. Presssure 15 bar.
Condensate Exhaust System: Semi automatic - Manual or Automatic to vacuum-operated.
QUICK EXHAUST REGULATOR: Thread 1/8-1/4. Regulation Range from 0-2 to 0-12 bar. Max. Pressure 15 bar.
LUBRICATOR: Thread from 1/8 to 1''. Max. Pressure 15 bar. Oil Loading System: Manual or Automatic to vaccum-operated.
SHOT OFF VALVE: Thread from 1/8 to 1''. Max Pressure 15 bar. Drive System Manual, Pneumatic, Electropneumatic.
SOFT START VALVE: Thread from 1/8 to 1''. Max. Inlet Pressure 3-10 bar. Drive Sytem Electropneumatic.
FR-L, V-FR-L, F-R-L, V-R-L, F-L are available.
|
|
C3
of plastic, modular design
5 and 20 µm, G1/4 - G1
outlet 0 - 8 bar, max. 8500 l/min
|
|
Assembled Combinations
Sizes Available: Miniature Series 1/8", 1/4" NPT and Compact Series 1/4", 3/8", 1/2" NPT
An assortment of filter, regulator, and lubricator combinations available.
|
|
|
|
|
|
Supply only "compressed air".
For compressed air, always use clean air chat does not contain corrosive gas.
Be sure to use non lubricated, filtrated dry air (équivalent to Class 1, 3, 2 - ISO 8571-3).
With a thorough understanding of compressed air characteristics, design a pneumatic circuit.
%u25A0 Where instantaneous stop holding at emergency stop is required, the same function as in the mechanical or hydraulic or electrical units cannot be expected.
%u25A0 There arise pop-up, jet-out and leaking phenomena caused by compressibility and expansibility, which are air characteristics.
Prior to use, always ensure that the product withstands the operating environ ment.
%u25A0 The product cannot be used in corrosive gas, chemical liquid solvent, water, water vapor (steam) and ozone atmosphère. When a product is exposed to water droplets, oil or metallic powder, such as spatters and chips, be sure to protect it.
%u25A0 No product can be used in the explosive gas atmosphère.
Always pay extra attention to the electric circuit during emergency stop, and cylinder opération, etc. during power failure.
Attach a "pressure switch" and "residual pressure discharge valve" to the compressed air inlet of the equi pment.
|
|
MD4
Modular Filters, Regulators, Lubricators with space saving design allowing for use in smaller spaces while providing high flow capacity.
MD4 series have modular clamps that can be disconnected from the front instead of the bottom, making filter element replacement and general maintenance much easier. There is also an option for an adsorber that is designed to remove vapors from the air line that cannot be removed by a coalescing filter. It allows for air to be free of oil and hydrocarbons.
|
|
|
|
|
|
In-line vacuum and pressure filters for high air flow rates (units of up to 60,000 litres per minute). These filter elements can be produced with either threaded or flanged attachments, and even special custom versions may be produced to meet client's requirements. Filter elements made of paper, polyester, metallic mesh etc. Stainless steel versions also available.
Materials
Special attention is given to the selection of materials and manufacture of products. Each filter is individually tested in order to assure serviceability of components in the long run. The cartridges may be fitted with different filtering materials such as cellulose, certified polyester of various type, wire meshing and microfibre.
Applications
This filter range is suitable for special applications, where the air volume to be treated is important. Filters may be used on both vacuum and pressurized systems. Owing to the notable know-how acquired during years of field experience, we can offer the advice and design solutions required.
|
|
TYPICAL APPLICATIONS
EFS
Standard size housings available with 30 (590), 60 (250), 100 (149), and 150 (99) mesh (micron) reusable, stainless steel filter cartridges. Units measure 11.25" long and feature a 1" NPT intake and dual 1" NPT discharge ports (3/4" reducers provided).
FEATURES
Graymills Superflo filters are designed to overcome the typical pressure drop and reduced flow due to clogging that occurs with ordinary filters. A permanent magnet suspended over the intake port traps ferrous particles which find their way into the fluid, and diffuses the flow outward into the filter screen flutes. Filtered material is trapped on the inside of the removable/reusable stainless steel filter cartridge. To clean, just remove the cartridge. All the contaminants come out with it. Self draining. No wasted fluid or messy leftovers to deal with. Stainless steel filter cartridges are available in four different mesh screens.
|
|
|
Designed for use as full-flow or partial flow filters and for the low pressure range up to 25/60 bar, medium pressure up to 210 bar and high pressure up to 450 bar, MAHLE pressure filters are ideal for application as main-line filters, flangemounted filters and filters in intermediate plate design. Rugged casings, streamlined design and an extensive range of accessories provide the optimal solution capable of meeting every market requirement.
|
|
|
|
|
|
HIGH PRESSURE EFFLUENT FILTER
In difficult drainage environments, where you want to spread the effluent out as much as possible and ensure you do not clog your media, this high pressure filter will act as a second level of filtration and will keep your orifice lines clean. This filter is ideal for filtering solids before they reach the drain field, especially when you are working with advanced systems, pressure dosing systems, or poor soil conditions.The filter installs on the discharge side of any effluent pump. Dual stainless steel screens prevent solids greater than 1/20” from passing to the drain field. This filter is easy to install and requires no special tools to remove it for service. It is accessible from grade level.
FEATURES:
- Plastic construction offers high chemical resistance and durability
- Low profile design takes up less space and allows for greater serviceability
- Protects drainfields from solids
- 316 stainless steel screen with vinyl sealing collar for longer screen, easier cleaning, increased corrosion resistance and tight, no-leak fit
- Large effective screen area for longer filter time between cleaning
- Screen size of 30 mesh
- Easy to install and service
- Installs on discharge side of any Polylok effluent pump
- Independent third-party testing indicates a TSS reduction of 30-40%
|
|
|
M&C Universal Filters reliably separate solids, in particular extremely fine particles,occuring in analysis techniques in gas filtration, using very fine, deep-acting filter elements.Thanks to their universal design, the filters can also be used as separators (without a filter element), liquid filters or, with adsorption cartridges, as an adsorption filter. For ambient or medium emperatures up to 180 °C, a stainless steel version FSS or FT-H version can be offered. Heated filters up to 320°C are also available.
|
|
|
Sediment collecting strainers "Y" and streamlined flow type, manufactured of grey cast iron PN 16, nodular cast iron PN 16/25, carbon and stainless steel PN 40.
|
|
Filter:
- Efficient and simple protection of the vacuum generator
- Flow: 6.5 to 720m³/h
- Filling: 1/4 to 4"
- Plastic and paper filter
Advantages :
• Compact, easy to fit
• Dirt accumulation indicator
• Cleaning of the filter cartridge with no vacuum network dismounting
• Negligeable drop of load
|
|
|
Closed filters with metallic cover for vacuum systems. Easy cover opening for the substitution of the filter element
|
|
Vacuum filters, series FVI
Compatible with pneumatic vacuum generators (venturis) or electric vacuum pumps.
|
|
|
|
|
|
This range of filters has been specifically designed to operate in conditions of almost absolute vacuum. Each filter is individually tested in order to verify its vacuum sealing capacity and the surface treatments applied are capable of ensuring their optimum condition through time. The filter cartridges are interchangeable with those usually used in this field. The filter screen being made of treated paper with filtering capacity of approx. 5 microns. This is sufficient to guarantee the protection of the vacuum generating pumps under normal working conditions. The filter cartridges need to be replaced when they are found to be either clogged or damaged, their replacement being facilitated by the filter closure system. In addition to the shown filter types, on request we also produce filters having special dimensions, with non-standard inlet and outlet caps, or with filter cartridges made of various materials, to meet special requirements.
Material
Particular attention is given to the choice of top quality material to assure long lasting product duration through time. The cartridges can be fitted with different filtering materials such as cellulose, certified polyesters of various types, metal wire meshing, microfibres and activated carbon. Special versions can also be made in stainless steel.
Applications
These filters may be used in any field where an optimal air filtering is required on machinery. Owing to the great experience acquired in this field, we can assure the solution of any problems of our customers about the matter.
|
|
Air Cleaners / Housings
Donaldson recommends the use of our housings with RadialSeal%u2122 sealing technology for compressors. Our FPG style housings are ideal because they%u2019re reliable, durable, plastic and easy to service. Many air cleaners are stock product, but custom design support is also available.
|
|
AF, CF, BF, SF, SPF, PF series compressed air filters are used for efficient removal of solid particles, water, oil vapours, taste and odours from compressed air in industrial applications.
The type and size of filters depends of compressed air flow, type and quantity of polution.
|
|
Heavy-Duty Standard Air Filters for On-Highway, Off-Highway, and Stationary Applications
Racor AFSF Standard Air Filters are designed to be connected to the air intake of the gasoline or diesel engine.
How They Work
Air flows through static vanes (plastic or metal) which causes the air to spin. Centrifugal force separates the heaviest impurities (dust, dirt, insects, and other debris) from the air stream. These contaminants are discharged automatically through an integral evacuator valve. Only purified air flows to the air filter elements (primary and safety stages of filtration).
Typical Applications
• Agricultural Machinery
• Earth-Moving Equipment
• Stationary Engines/Generator Sets
• Trucks, Buses, and Recreational Vehicles
• Material Handling Equipment
• Snow Removal Equipment and Street Sweepers
|
|
Cartridge filters
Automatic compressed air cleaning filters
Bagging filters with polypropylene bags
Self-cleaning filters with closed-circuit storage of waste in collectors
|
|
Compressed air filters AF Series are used for efficient removal of solid particles, water, oil vapours, taste and odours from compressed air in industrial applications.
The type and size of filters depends of compressed air flow, type and quantity of polution.
Available optional equipment is described on picture below.
- max. operating pressure: 16 bar (232 psi)
- operating temperature range: 1,5 to 65 °C (35 to 149 °F)
Standard equipment includes filter housing and filter cartridge.
|
|
QF PREFILTERS, 5 micron
Code Product
548103000 QFI 05
548104000 QFI 10
548105000 QFI 18
548106000 QFI 30
548107000 QFI 34
548108000 QFM 50
548109000 QFM 72
548110000 QFM 95
548111000 QFM 125
548112000 QFM 165
548113000 QFM 190
548114000 QFM 220
548115000 QFM 280
548116000 QFM 350
548117000 QFM 440
|
|
The 10F Miniature Coalescing Filter is designed to remove 99.9% + of the liquid aerosols, both water and oil, and submicron particulate matter from your pneumatic system. These filters will provide oil free air for applications such as spray painting, air gauging, pneumatic instrumentation, printing, and packaging.
FEATURES:
Removes Liquid Aerosols & Sub-Micron Particles
iquid Gravitate to the Bottom of the Element & Will Not Re-Enter the Airstream
Interchangeable Twist & Automatic Pulse Drain
|
|
High efficiency filter / regulator air set for the highest quality compressed air for instrument and control systems.
- Eliminates problems due to poor air quality.
- 100% water removal at line temperature.
- Solid particulate removal to 0.01 micron.
- Oil aerosol removal to 0.01 mg/m3
|
|
Features
* Removes Liquid Aerosols and Sub-micron Particles
* Protects Pneumatic Systems from Contamination that Standard Particulate Filters Will Not Catch
* Two Different Grade Elements Available
* Differential Pressure Pop-up Indicator Standard
* Differential Pressure Gauge Optional
* High Flow Design
|
|
FSX Solutions - Cast filters
Features:
* Cast aluminum construction
* Available connections from 1/4" NPT to 3" NPT
* Pressures up to 725 PSIG
* Flow capacities from 30 to 1650 SCFM
* Internal and external corrosion protection
Available with differential pressure gauge, float drains, zero-loss drains, manual drains or oil indicator (for activated carbon filtration) etc.
Typical Applications
Coalescing water/oil removal:
* Compressed air and gas system protection
* Dryer protection
* Paint spray booths
* Air tools protection
* Point of use
Particulate removal:
* Desiccant dryer after-filter
* Prefilter to coalescer
* Systems with higher particulate concentration
* Particulate protection for non-lubricated systems
Hydrocarbon vapor removal:
* Odor removal
* Food packaging
* Powder paint systems
|
|
Air treatment system: filter, regulator, lubricator
- A modular, compact range for all types of pneumatic circuits
- Quick mounting and connection on installation: filter, regulator and lubricator functions in a "single unit"
- Lightweight and robust for direct fitting on rigid conduits
Accessories: Softstarter cut-off valves, padlockable manual isolating valves, bypass modules.
|
|
|
|
|
|
After compressing the air, the concentration of particles and moisture increases. This creates an abrasive mixture that can cause extensive damage.
Instruments and tools can malfunction, spray painting and breathing air can be rendered unusable, maintenance costs will increase and products will be spoiled.
The range of Atlas Copco's DD - PD - DDp and QD filters, when used in the correct combinations, will provide high quality air from 9 to 7200 l/s at nominal working conditions.
DD range:
Coalescing and particulate filters for general purpose protection, removing liquid water and oil aerosol to 0.1 mg/m (0.1 ppm) and particles down to 1 micron.
DDp range:
Particulate filters for dust protection, removing particles down to 1 micron.
PD range:
High efficiency coalescing and particulate filters, removing liquid water, oil aerosol to 0.01 mg/m (0.01 ppm) and particles down to 0.01 micron.
QD range:
Active carbon filter for removal of oil vapours and hydrocarbon odours with a maximum remaining oil content of 0.003 mg/m (0.003 ppm) to be installed after a PD filter.
|
|
Compact module
•The main dimensions (width and depth) ofF.R.L. devices have been integrated into a com-pact module. Accurate assembly dimensionsare obtained with simple calculation.
Long-life element
•This element incorporates CKD's originalchemical fiber structure (patent pending), whichhas a rough surface and gradually becomesfiner toward the inside. Clogging is greatly re-duced, and the element life is greatly extended.There is no worry of rust forming.
Embedded pressure gauge for saving space
•The conventional protruding pressure gaugewasted space on the front, and endangeredpersonnel. A neat design and safety have beenrealized by embedding the pressure gauge intothe body.
|
|
HD High Pressure Filters
HD high pressure filter housings are designed for compressed air and gas applications up to 400 bar. Each housing can accommodate any of our standard range of filter elements for your specific need. Flow capacities from 30 to 720 m³/h nominal at 7 bar g are available. Modifications on request.
|
|
|
|
