|
|
Tube: Synthetic NBR rubber, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: black Neoprene compound, oil resistant, smooth
Application: standard air brake replaceable couplings, reference with SAE specifications.
Temperature: -20℃～+100℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
For almost ten years, Valpar has offered tubing specially designed for the automotive industry. Many leading manufacturers around the globe use Valpar fuel lines and air brake tubing. As a cutting edge innovator, Valpar has progressed and increased its portfolio to offer value-added products such as thermoformed and cut to length tubing.
Valpar manufactures a wide range of nylon airbrake to meet the stringent demands of the automotive market. Valpar nylon air brake tubing is an alternative to other materials like rubber hose and metal tubing. The benefits of nylon over other materials include:
• Great savings in weight of the tubing, making it easier to work with
• Superior resistance to elements which can effect this part of the system eg. oil, gasoline, chemicals and many others
|
|
Coilhose Pneumatics offers the following coiled pneumatic hose types:
Nylon Air Hose
StowAway Heavy Duty Nylon Air Hose
SlimCoil Nylon Air Hose
Twin Bonded Nylon Air Hose
Nylon Hose Fittings
Flexcoil Polyurethane Air Hose
Flexcoil Assemblies with Quick Disconnects
CUB Coil Polyurethane Air Hose
Flexeel Polyurethane Reinforced Coiled Air Hose
|
|
Recoil Airline Coils
* Pre-coiled seamless Nylon (PA) 12, supplied with factory fitted 360° swivel male couplings, complete with spring guards.
* Stock sizes from 8mm to 12mm OD in 2.5m 5m & 10m working lengths
* Easily Installed
* Lightweight
* Spring Guards
* Highly Flexible
Technical Information
* Temperatures: -35°C to +70°C. Occasional use up to 120°C. Brittle point: -70°C. *
* Lightweight
* Highly flexible
* Easily installed to suit a variety of horizontal or vertical applications
* All the benefits of Colex Nylon tubing in a handy re-coil format
* Resistant to moisture absorption
* Provides consistent flexing over a wide operating temperature range and humidity conditions
* Spring guards are fitted to both ends of the tube to prevent kinking and a choice of 1/4″ and 3/8″ BSP end fittings are available from stock
|
|
The tight diameter of our Mini-Coils make them extremely flexible and ideal for use with robotics, instrumentation, small pneumatic tools, control circuits or any other application requiring either constant or intermittent motion. They are available in Nylon (higher pressure rating and heat resistance) or Polyurethane (more flexibility) and include a pigtail on each end for easy fitting installation or connection to other devices.
- Recommended working length is 85% of the total length.
|
|
|
|
|
|
Family of polyurethane (PUR) hose styles up to 232 PSI (16 bar) that are lightweight and extremely flexible for specific application requirements. CEJN PUR hose offers excellent recoil ability, making it a perfect mate for small and lightweight pneumatic tools. Outlasting conventional PVC hose up to 10 times, the hose also offers
- Excellent resistance to oils, solvents, and other non-aqueous solutions
- Abrasion resistance and excellent tensile, tear, and impact strength
- Long service life with outstanding aging qualities
Styles in CEJN’s PUR hose family include:
Braided
- Straight hose: Easily springs back to original form, excellent choice for applications requiring a maximum working pressure up to 232 PSI (16 bar)
Non-braided
- Straight hose: Suitable for use with push-to-connect fittings, excellent choice for applications requiring a maximum working pressure up to 145 PSI (10 bar)
- Spiral hose: Excellent crimp resistance
- Spiral anti-spark hose: Spark and scorch resistant
Straight braided
- Electrically conductive hose: Dissipates electro-static discharge
- Anti-spark hose: Spark and scorch resistant
- Water hose: Excellent choice for compressed air in damp and wet environments
|
|
|
|
|
|
Flexeel Reinforced Polyurethane Straight Hose:
Flexeel Polyurethane Hose offers an excellent alternative to much bulkier rubber and plastic hoses. Extremely lightweight and tough, it is ideal for either outdoor contractor use or indoor industrial use. Flexeel retains its flexibility even in cold envionments. The reinforced construction eliminates the possibility of having various layers separate due to the constant expansion and contraction during pulsating operations, such as with staple or nail guns. Flexeel is available with reusable, reusuable strain relief, or quick disconnect fittings. Flexeel is also compatible with our Polyurethane reusable fittings for in-the-field replacements.
In addition to Flexeel, we also offer the following straight air hose catergories:
Water Flexeel Industrial Polyurethane Hose
FlexReel — The Best Way to Store and Transport Flexeel
Nitrile Blend Hose
General Purpose Hose
Thermoplastic Hose
Lock-On Rubber Hose
Lock-On Rubber Hose Fittings
Ball Swivel Lead-In Hose
Pigtail Assemblies
Manifold Coupler Whip Hose Assembly
Brass Hose Fittings
Hose Crimpers
Hose Ferrules
Clamps, Installation & Removal Tools
|
|
Pneumatic Polyurethane Tubing
* 100% ester based polyurethane
* Stock sizes from 4mm to 12mm OD
* Choice of Colours
* Lightweight & Flexible
* No Plasticizers
* Minimum Kink Memory
|
|
|
|
|
|
Pneumatic tubes made of polyethylene
Pneumatic tubes made of polyamide
Pneumatic tubes made of polyurethane
Pneumatic tubes made of FEP
Pneumatic tubes made of polyethylene/aluminium
Pneumatic tubes made of other plastic materials
High-performance hose lines
We manufacture ready-to-fit hose lines for pressures for more than 600 bar and for all media, hoses made from rubber, plastics and metal for applications in industry, construction and business.
Pneumatic pipes and air hoses
Our range of plastic pipes with calibrated external diameters for pneumatic applications is supplemented by quick connection systems and functional fittings. We can also supply just the right hoses for ventilation and extraction tasks.
Suction and pressure hoses
We can satisfy an extremely wide range of requirements with a broad selection of suction, pressure, construction, conveyor and water hoses.
Fittings
Press-on fittings and jointing systems are available, as well as ball cocks for all pressure levels, diaphragm valves and non-drip quick connection couplings.
Expansion joints
Expansion joints made from rubber, PTFE, metal and textile materials are used for coping with expansion and vibration and also to provide insulation against solidborne noise in pipelines.
|
|
Compressed air applications
MAXAIR
For pneumatic tools and general purpose compressed air hose in industrial and other applications.
Suitable for compressed air in all applications, oxygen (ID ≤ 25 mm only), and inert gases for arc welding: argon, nitrogen, and carbon dioxide.
Also for other media (under certain conditions) such as industrial water, aqueous solutions or emulsions for horticultural spraying, white washing, disinfection, acids and alkalis.
From 5 to 100 mm.
|
|
INFINITY
Brass push-in fittings and aluminum tubes.
Easiness and quickness of assembling.
Special patented fittings for outlet.
Diameters available: 20, 25, 32, 40, 50, 63 mm
Compatible Fluids: Compressed air, Inert gases and Vacuum
Minimum temperature: -20°C
Maximim temperature 80°C
Minimum pressure: -0.99 bar
Maximum pressure: 15 bar
UV resistant. Fireproof. Anticorrosive coating.
"MOVE THE AIR POWER"
|
|
- Aluminium pipe
- Diameters 16.5 to 100 mm (1/2'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
PIPES AND FITTINGS FOR COMPRESSED AIR RINGMAINS
System PVR (PVC alloy) and Concept ALR (aluminium) offer an easy to use, modular system for installing air networks.
|
|
To carry out any geometry of pneumatic network, final or temporary Atlas Copco proposes Airnet piping to you: 6 diameters of aluminum tubes and a panoply supplements connections and accessories.
Insensitive with corrosion, the Airnet system preserves the quality of the air up to the point of use and offers a major asset in the control of escapes and the pressure losses énergivores. Very smooth, the internal surface of the tubes supports the flow of the fluid, minimizing of as much the energy request. The Airnet modules are guaranteed 10 years and in conformity with the directive the DEVELOPING COUNTRIES 97/23/EC. Their blue coating of standardized color makes them easily identifiable.
Diameters: from 20 to 80 mm (3/4 inch with 3 inches)
Temperatures: of -20 C with +70°C
Maximum operating pressure: 13 bars
|
|
| ... products without technical information |
| |
Applications:
heating or het-loss free transport of: oil, grease, wax, resin, tar, paint, water, carbon dioxide, plastics, sealants, etc...
Emplyable pressurised hoses of PTFE from DN 4 to 50 mm; pressure train depending on nominal width up to 600bar.
|
|
HEATED HOSES - for gas and liquid transfer.
During Gas Analyzer Sampling, Hot Melt Transfer, Petroleum or Chemical Transfers, or Food Processing, it is needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature. Thermo Heated Hoses aptly cater to this need, by ensuring that the fluid in the process tube (part of the heated hose), looses no heat.
These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids.
Construction
Heated Hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out.
|
|
Heater Hose
Characteristics of Flexfab's silicone heater hose...
Continuous operating temperature -65°F (-54°C) to +300°F (+150°C). Nylon fiber reinforced. Resistant to coolant additives. Flexfab silicone heater hose is shipped on wooden reels or handy dispenser cartons containing 25' or 50' of hose. For high temperature applications, Nomex® reinforcement is available.
|
|
STEREO-HEAT® Impedance Heat Tracing is a direct current electric traced system across the ends of a steel or alloy pipeline section that provides even heat distribution on short to medium runs of preinsulated pipe.
STEREO-HEAT® Impedance Heat Tracing is based on the application of AC voltage across the ends of an insulated pipeline section on short and medium runs of pipe causing a current flow in the pipe walls that generates heat. This is an engineered custom designed system within ANSI/IEEE 844, NEC 426,427 and your specification requirements. This system can be retrofitted onto an existing pipe system or as part of a preinsulated PERMA-PIPE® system. Applications such as liquid food products, oil, asphalt, resins, napthalene, Urea, food oils are just a few systems that utilize STEREO-HEAT® tracing.
|
|
|
|
|
|
At ECAS, we manufacture heating cables and flexible electric elements, for temperature control systems in networks of pipes.
The main purpose of pipe tracing is to avoid and compensate for the loss of heat certain fluids undergo during particular production processes.
Of utmost importance is that the fluid or product flowing in the pipes does not freeze, change viscosity, or harm the piping network.
For sanitary hot water systems, our pipe tracing system avoids the cooling of the water, especially when it is not moving, avoiding the spread of Legionnaire disease.
Heating cable:
For pipe tracing projects we recommend constant power parallel heating cable, model CTCS.
The parallel heating cable has a constant lineal wattage even when it is cut to required length.
Control and regulating :
We have different types of control and temperature regulating solutions, which are adaptable to all kinds of projects, and/or the needs of our customers.
Below are some of the control systems:
DPA: Control and regulation box to connect between 1 and 4 circuits, from 8A to 63A at 230V.
EWDR 902 - T: Digital Thermometer/Thermostat.
ETV - 1991- P: DIN/Omega rail electronic modular analogue thermostat.
ETN - 2P - 1441: DIN/Omega rail electronic modular analogue thermostat with mini-switchboard.
|
|
Application Pontencial:
Submersible heaters, containers, valves, pumps, form, process and plate heaters.
This mineral-insulated heating cable with a braiding of high grade stell 14541 is applicable within extreme corrosive and damp surroundings. The HIL heating cable is extremely robust and easy to bend. The stainless stell brainding is waterlight, oiltight and gastight. An utilisation temperature of up to 800°C enables a variety of applications. The cold end of the heating cable can be fed into a terminal box and connected by means of a MX20X1.5 screwed connection.
|
|
CH-Constant Watt High Temperature Maintenance Electric Trace Bundles
Maintain Temperatures up to 400˚F (204˚C)
Process Tubes 1/4” to 1/2” O.D. (6mm to 12mm) - Single or Dual Tube Designs
Applications:
Analyzer, impulse and instrument lines; small diameter process lines, stack gas sampling lines; and utility lines.
|
|
|
The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
