|
|
Dalmec offer a wide range of equipment for the “weightless” handling of sheets, various panels, panels of glass etc.
Simple to use, they allow the operator to move the sheets around quickly, accurately and safely.
These manipulators are custom-built and the type, design, dimensions and picking system used is specially adapted to suit the specific requirements of the user and the various environmental conditions available.
|
|
|
Dalmec has designed and manufactured hundreds of manipulators with special toolings for the handling of textile products having different forms, weights and dimensions.
|
|
FAMATEC FRIENDLY is a “standard” solution for specific applications with common requirements. User-friendlyness, unique design and extreme detail care are the key points of FAMATEC Friendly success.
All the solutions from our brands have as common factors the highest care in details and the will to be recognized as product-leader for the quality of the service offered.
|
|
Pneumatic manipulating model Standard with tool of taken to magnet
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of a manipulating to snodati rigid arms equipped of vertical movement of raising to double rope. The solution can be used for the movimentazione of all those products that can be raised through a magnet (in the event illustrated windings).
The product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is mounted on a fixed column but it can be had also in the configurations to column, on autostabile base, hanging and flowing (also with system to bridge-laying tank).
Capacity 200 kg
Range 2500
|
|
|
|
|
|
Loader seeds automatic rifle for sticks of paper for the line of feeding of a rotating one of press.
Semi-automatic loader for sticks of paper FOR the line of feeding of a rotating one of press.
It is equipped of a system of taken to pneumatic clamp opportunely sagomata and determine the proportions, joined to a balancing system automatic rifle of the cargo installed on an articulate arm or the flowing ways of race to carroponte.
It is used with nature acting on the commando console who is studied in order to guarantee ergonomics and operating rapidity; 4 sticks are loaded medium with paper to the minute.
The taken clamp of is constituted from two thin ganasce sagomate flowing ones for the taken one on the short side of the packages of paper; the wide faying surface of the ganasce avoids that the ream of paper is damaged on the flanks for effect of the serration force.
The commando console is Friendly, with prati push-buttons to us of dual-control for the drive of the clamp avoiding crushings or traumi to the limbs.
The balancing body of the machine works to compressed air 7 bars (0,7 mPa), is of highest reliability and duration in the time.
It can be installed in three various configurations:
on a double mounted articulate arm on a fixed column
on a double mounted articulate arm on a fixed column to a autostabile platform
on aerial flowing track on axis X or to carroponte on the aces X and Y.
It works to single compressed air, is marchiato CE and it is not subject to the safety controls of the raising systems.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
Pneumatic arm manipulators for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 600 kg
Max work radius 3,7 m
On customer request the following can be supplied:
· Fork liftable self bearing base
· Push or powered trolley for suspended execution
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Rails systems, complete with metal supporting frame, delivered as a turn key project
|
|
Pneumatic rope balancers for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 75 kg
Max work radius 3 m
Rotation 360°
On customer request the following can be supplied:
· Fork liftable self bearing base
· Push or powered trolley for suspended execution
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Jib cranes or light crane bridge or monorails systems, complete with metal supporting frame, delivered as a turn key project
|
|
Pneumatic rope balancer with special double fork handling attachment, with adjustable width, provided with mechanical locking of the handled part. Properly designed to handle metallic and/or plastic boxes and cases.
Available also in version with rotating device for the emptying of the contents.
Max capacity 80 kg.
|
|
Pneumatic rope balancer with pneumatically operated permanent magnet handling attachment. Particularly indicated for handling of steel part having both flat or round surface. Safety device allowing the automatic connection of the load balancing function only if the part is gripped.
Max capacity 80 kg.
Also suitable in execution for manipulator with capacities up to 250 kg or more, to be used also with tilting or turning devices.
|
|
The most advanced manipulator
A rigid manipulation principle is often desirable for eccentric handling (loads that can be handled centrically are best manipulated using a flexible or self-suspended principle such as a cable balancer). The most advanced possibility in rigid handling systems is the Master Balancer: because, in this case too, the arms are bare and hollow. So that manoeuvrability is much better than with conventional manipulators which have drive elements and sometimes even ballast weights on the arms, which means that everything moves. (For technical specifications: see table below)
|
|
|
Manipulating ATISmirus 100 with tool to ventose for the movimentazione of scato them in cardboard. The job cycle previews the disattivazione of the parking brakes acting on the appropriate selector. The tool to ventose comes posizionato from the operator on the product to enliven place on the packing emplacement the taken operation of of the product comes executed from the operator acting on the appropriate push-button of taken predisposed on the tool. Caught up a prestabilito value of empty that it assures abundant emergency, the insertion will be had automatic rifle of the balance to cargo. The operator can enliven therefore the cargo easily acting directly on the grip or the product. The release of the product on pallet is obtained pressing the two push-buttons at the same time affixed to you with consequent restoration in automatic rifle of the balance to empty.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
|
With Stanley’s new iTrolley for enclosed and patented track rail systems, moving loads with large unwieldy bridge cranes is now possible with greater speed and precision than ever before. The system masks the momentum and inertia of the overhead crane, greatly reducing the starting-and-stopping strain that causes most operators to abandon the equipment and perform the task manually.
|
|
Material handling equipments, specialist since 1975.
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
The great versatility of these manipulators, their ease of use, the presence of tailor made configurations to suit every customer%u2019s special requirements, as well as the complete safety against the free fall of the load make of LiftronicÒ Systems a practical and cost effective material handling solution for a great deal of manual handling applications on assembly, packaging and production lines and in every field of industry.
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
| ... products without technical information |
| |
A complete range for handling parts up to 20 kg :
Gripper:
- angular clamping 40° and 180°
- parallel clamping and long stroke
- compacts
- special
Linear modul
(with intermediate position, rod clamping)
Rotating modul
(with intermediate position)
|
|
Extruded Flat Lift Table
EF1-based, guided cylinder with four shafts for maximum rigidity. It is designed for lifting applications where other non-rotating cylinders cannot handle an overhung load and space is at a premium.
Four-shaft support withstands offset loads and moments.
Simple, efficient design provides economical alternative to other costly guided actuators.
Joins the EF family of products, so shares all the same benefits--long service life, low friction operation, fast delivery.
Convenient wide tooling mounting surface.
Intended for vertical lifting applications (should not be mounted horizontally or with tooling plates facing down).
|
|
|
|
see the results for the following category : 