|
|
Both Double Acting and Spring Return VIP valves (either Normally Open or Normally Closed) are available in sizes ranging from 3/8”
to 2”. GAS threaded ends as per UNI/ISO 7/1 Rp - DIN 2999 (NPT threads on request) with control fluid connections as per NAMUR interface.
Improved fluid dynamics allow minimum pressure losses. See Flow Pressure Diagram.
VIP valves can be used in any mounting position (horizontal, vertical
or oblique). They can be provided with seals in NBR, FKM or EPDM:
-NBR: suitable for air, gas, oils, water etc..
-FKM: perfectly suitable for most fluid. Unsuitable for steam.
-EPDM: perfectly suitable for hot water and steam. Unsuitable for mineral products (oils, grease, etc..).
|
|
Our MV serie is meeting the technologically most advanced principles, and it is to be considered the CORE of a pneumatic installation. It is made up of a wide spectrum of small valves, flow controls whose functions abide by physical and logical laws. These components can adjust, check, vent the flow and change its direction in an installation.
We always recommend using them with filtered and oiled air to guarantee a long-lasting flawless function.
|
|
|
These light-weight pneumatic valves stand out for their solid, compact design, short response times and an amazingly high flow capacity. Designed as resilient-seal spool models, these valves are available in 3/2-, 5/2- and 5/3-way configuration for either solenoid or pressure control. Individual units can easily be assembled to form complete valve blocks requiring limited mounting space. Port sizes range from M5 through G 3/8.
|
|
Compact high-performance valves are always in demand. AIRTEC addresses this market with our technically and economically advantageous electromagnetic valves.
Put them to the test. You won't be disappointed.
Single solenoid valves
Double solenoid valves
5/3-way valves
Customer solutions
Manifolds and sub-bases
Available with external pilot supply
Customer specific solutions
|
|
|
Airflex Quick Release Valves provide rapid evacuation of pressurized air from pneumatic devices. They provide an exhaust port at the device rather than at the end of a long supply line and/or control component. Exhaust is rapid and positive as soon as there is a pressure drop in the supply line. Mufflers are available to reduce exhaust noise.
|
|
|
|
|
|
The Pneumatic Solenoid Valves 720 Series are available in both NC and NO version. They include all innovations, which are present in Matrix solenoid valves, both in materials and operating principles.
They couple simplicity and reliability with high dynamic performance. Response times are of milliseconds range, while their operating life is over 500 million cycles. The Series comprises Vacuum versions designed for uses with vacuum technique.
Due to the facility to be speed-up controlled,dynamic characteristics become even more improved: standard solenoid valves equipped with 24 VDC control present response times lower than 5 ms in opening and 2 ms in closing, with a maximum operation frequency 200 Hz. On the contrary, solenoid valves equipped with speed-up control present a response time both in opening and closing lower than 2 ms, with a maximum operation frequency 300 Hz.
Besides high-speed characteristics, solenoid valves 720 Series offer flow rate value to 100 l/minute (ANR), with supply pressure from 0 to 8 bar.
720 Series is available both in line assembly version and on sub-plate and is equipped with a range of accessories such as multi-position manifolds and speed-up driver boards.
|
|
|
|
|
|
750 Series 3/3 presents a small-sized single body with four utilities, assuming, according to the different models, the following configurations:
In the present model, all the innovations offered by Matrix technology, this combines special dynamic performance to the simplicity and reliability of manufacture, are present. Response times are of millisecond range, while operation life is over 500 million cycles.
With a speed-up kind control, dynamic characteristics are even more improved. Standard 24 VDC control solenoid valves have a response time lower than 5 ms in opening and than 2 ms in closing, with a maximum operation frequency 200 Hz. Speed-up control solenoid valves have a response time lower than 2 ms both in opening and in closing, with a maximum operation frequency of 300 Hz.
Besides high-speed characteristics, 750 Series solenoid valves offer flow rate values up to 100 l/minute (ANR) for every single outlet, with feeding pressure from 0 to 4 bar.
For 750 closed centres series, a lot of accessories is available, such as IP 52 or IP 65 connectors, manifolds with different positions and speed-up driver boards.
|
|
This spring-loaded safety valve with a very high blow-off capacity, labeled as D/G (models 352.00 to 352.30), will be used for protection of
pressure vessels and pressure systems for air and other neutral, non-toxic and non-combustible gases.
This design allows a usage to secure fixed pressure and vehicle tanks from dust and granular goods.
The valves only can be supplied with a preset pressure, the desired set pressure must be specified with the order. After setting, the valves are
labeled and sealed.
For functional testing, the safety valve can be opened by turning the knurled screw.
The bearing surfaces and seals can be cleaned from impurities by unscrewing the upper part without changing the pressure setting.
Repairs may only be executed by the manufacturer.
|
|
Increasing costs in conventional wiring and piping helped fuel the advancements in valve terminals.
AIRTEC offers technically superior solutions to meet your industrial requirements while saving you valuable time and money.
Multi pin, ASInterface, Profi-bus and Device Net connections
Eliminates labor intensive wiring and piping
Common air supply
Compact in size
Customer specific solutions
|
|
|
|
|
|
|
Offering W60 Series, W68 and W88 Series, W80 Series, and W90 Series Single Seat Pneumatic Valves. WCB W60 series is a modular family of valves that are the ultimate in: easy cleaning, high pressure, low maintenance design. With 16 standard bodies, 12 different actuators, 5 stem types, and a wide range of control tops, the valves can be configured to precisely fit any application. The W68 and W88 Series consists of a modular family of "throttling or pressure control" valves that are the ultimate in: easy cleaning, high pressure, low maintenance design. With 11 standard bodies, 12 different actuators, 4 stem types, flush or standard adaptor, and a wide range of control tops, the valves can be configured to precisely fit any application. The W80 is a great solution for aseptic applications, this valve series utilizes a stem flush adapter to provide a liquid or steam barrier around the valve stem. When the product must be isolated from the external environment, the W90 Series valve is an ideal choice. This series valve utilizes a diaphragm adapter to provide a reliable, hermetic seal around the valve stem.
|
|
|
Camozzi offers a large range of valves and solenoid valves with varying dimensions for use in different types of equipment. The components have been produced for single use and for mounting on manifolds or on sub-bases, and each size has been designed to give the most effective performance possible.
|
|
Streamline and modular. Proven valve technology, easy to clean and corrosion-resistant for use in food processing zones - also available without control cabinet.
• Valves: 2 x 3/2-, 5/2-, 5/2-way double solenoid, 5/3-way
• Standard nominal flow rate 300 ... 650 l/min
• 4 ... 12 valve positions, 8 ... 24 valve coils
• Multi-pin connection, fieldbus connection DeviceNet
• Protection class IP65/IP67
|
|
The miniature Preset Flow Control is ideal for many applications involving pneumatic systems, including the control of cylinder speed.
The operation of the flow control is based on the movement of a small disc. The flat surface on one side of the orificed disc seals and permits flow through the orifice. The amount of flow permitted in the reverse direction is determined by the orifice size. In the forward direction full flow is permitted. The flow controls design allows a maximum supply pressure of 75 PSI with a minimum cracking pressure of less than 10” H2O. Orifice sizes are available from .004” to .040”.
|
|
|
Series mini-distributor LS04 M8 Connector industry, Ø4 connection, Ø6 XS 30 gr. 200 Nl/min AF 51 gr. 330 Nl/min Systems compact carry-distributor VTS LS04 330 Nl/min
|
|
Camozzi offers a large range of valves and solenoid valves with varying dimensions for use in different types of equipment. The components have been produced for single use and for mounting on manifolds or sub-bases, and each size has been designed to give the most effective performance possible.
A large number of voltage and coil options are available within the solenoid range satisfying most requirements.
|
|
The all-rounder. Tried and tested a million times the world over: comprehensive range with 5/2- and 5/3-way valves.
• Flow rate up to 2,000 l/min
• V solenoid coil: low power consumption
• F solenoid coil: ex-protection, freely selectable voltage
• Side or front mounting
|
|
THREE-WAY VALVES :
with conical valve shutters, they ensure excellent flow capacity
MONOSTABLE OR BISTABLE THREE-WAY SOLENOID VALVES :
they can be fitted in a vacuum circuit operating in N.O. and N.C. They insure excellent flow capacity and reduced switching times. They can manage a continuous counter jet on the third release to facilitate release of suckers. The bistable (safety) version ensures that the vacuum is maintained both with lack of power and pressure in the servo-pilot.
|
|
General Description:
A range of heavy duty 4/2 + 4/3 solenoid, pilot manually operated 'Fluoslide' directional control valves in stainless steel for use on gases.
- Heavy duty. High flow. Critical applications.
- Hazardous area solenoids.
Operating Fluids:
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water (details on application).
|
|
All EV-,ET- and EC-series electronic valves with the "O-" option are available manufactured and assembled for use in Oxygen-enriched environments for applications that are extremely sensitive to contamination.
These valves are ultrasonically cleaned, assembled, inspected and tested in an enclosed controlled area with a state-of-the-art positive pressure filtration system.
Both organic and inorganic contaminants such as particulate matter and hydrocarbon oils are removed.
No organic sealants, adhesive or lubricants are used in the manufacturing process.
Feature FKM (fluorocarbon) seals.
Components parts are lubricated with Oxygen-compatible PFPE (perfluoropolyether) grease, only as needed for assembly.
Individual testing and inspection is accomplished utilizing compressed Nitrogen and ultraviolet light.
Products are double bagged in heat-sealed polyethylene bags.
|
|
ISO-Standard ISO 5599/I (Series W60, W63, W64)
ISO 5599/II (Series W65)
ANSI-Standard (Series W70 and W74)
SAE-Standard (Series 80 and 84)
All piping is to the base, not the valve, for easy valve removal and servicing.
Other features:
Three constructions available:
poppet
stainless steel spool & sleeve
resilient seal spool
Valves are fully interchangeable with any other valves using a standard mounting interface
Compact design (manifold mounting system)
5/2- and 5/3-way valves in all sizes available
Port size up to G 1½
Flow rating up to kv = 22
Electrical connections provided by:
drop-cord plug (ISO 5599/I)
body-to-base / plug-in base (ANSI or ISO 5599/II)
3- or 5-pin connectors (SAE-Norm)
Variety of interposed control devices available.
|
|
|
|
|
|
2002 Series Valve
Modular reality, plug together flexibility in design! Sub-miniature 3-way and 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Electronic interface options include DeviceNet, Profibus-DP, 1771 Remote I/O, and DeviceLogix.
Standard Specifications:
Cv: 0.20 to 0.25
Port Sizes: 1/8 NPTF, 4mm, 6mm
5 ported, 2 & 3 position, 4 way
Flow Capacity: 11.5 SCFM @ 80 PSIG / 246 NI/m @ 6 bar
Operating Pressure Range: 28" Hg. Vacuum to 150 PSIG / Vacuum to 10 bar
Pilot Pressure Range: 35 to 115 PSIG / 2.5 to 8 bar
Temperature Range (Ambient): -10°F to 115°F / -23°C to 46°C
2004 Series Valve
Modular reality, plug together flexibility in design! Miniature direct solenoid and solenoid air pilot actuated valves. Manifold mounting with DIN rail option. Electronic interface options include DeviceNet, Profibus-DP, 1771 Remote I/O, and DeviceLogix.
Standard Specifications:
Cv: 0.35 to 0.40
Port Sizes: 1/8 & 1/4 NPTF, 4mm
Flow Capacity: 16 to 18 SCFM @ 80 PSIG / 345 to 394 NI/m @ 6 bar
Operating Pressure Range: 28" Hg. Vacuum to 150 PSIG / Vacuum to 10 bar
Pilot Pressure Range: 20 to 115 PSIG / 1.5 to 8 bar
Temperature Range (Ambient): -10°F to +115°F / -23°C to +46°C
|
|
Maximatic FRLs condition and prepare compressed air for use in fluid power systems. Pneumatic applications with properly conditioned air will operate longer, cost less and improve system efficiency. Clippard offers five different sizes from #10-32 to 1 NPT of Filter, Regulators, Lubricators and combination units. Their modular design and interconnecting brackets provide flexibility and facilitates simple field installation and/or modification.
Clippard's all-new Maximatic Solenoid valves are available in 2-,3- and 4-way configurations in port sizes from #10-32 to 1/2" NPT. Select either a direct-acting poppet or solenoid-controlled pilot operated balanced spool design. These electronic valves offer high flow in small package, and are constructed of aluminium, stainless steel and thermoplastic materials.
|
|
This series of solenoid valves is designed for use with compressed air and other neutral gases. The programme features products with threaded port connections ranging in size from M3 to G1/4. In addition, valves from all product groups can be manifold mounted for ultimate flexibility. The series is part of a comprehensive programme of solenoid valves with over 5000 body, seal and design variants.
|
|
|
|
|
|
CL18 & CL26
Our CL18 & CL26 Series valves offer a low-cost alternative! 4-way solenoid air pilot actuated. Conform to ISO 15407-1. Simple wiring connectivity using 17mm DIN connectors. Available on bar stock manifolds, up to 12 stations.
ISO 5599/2 & 15407-2 Series Valve
Numatics ISO series valves are high speed, heavy duty valves, designed for general service on all types of automation. Valves comply with ISO standard 5599/2 for valve unit to base interchangeability. Direct solenoid and solenoid pilot actuated models available. They are true multi-purpose valves and employ the patented Numatics spool and sleeve assembly.
ISO 5599/1 Series Valve
Numatics ISO series valves are high speed, heavy duty valves, designed for general service on all types of automation. Valves comply with ISO standard 5599/1 for valve unit to base interchangeability. Direct solenoid, solenoid pilot and air pilot actuated models available. They are true multi-purpose valves and employ the patented Numatics spool and sleeve assembly.
|
|
- for standard applications (Series D27)
- for special applications (Series D21)
Can be mounted close to the actuator, reducing length of pipe to be pressurized/exhausted on each cycle.
Other features:
"Self-cleaning" poppet design
Available with different internals for three different temperature ranges
Five flow patterns are available:
2/2-way, normally open/closed
3/2-way, normally open/closed
4/2-way
Port size up to G 2½
Flow rating up to kv = 61
Long service life. Very often these valves "survive" the machines they are used in.
LOGICAIR® adaptors provide special functions, e.g.:
Timed sequence adaptor
Air-Index-Adaptor (allows a single control valve to function as an impulse controlled, detented valve)
"PB"-adaptor (for higher actuation force)
|
|
Solenoid valves
* NC/NO single solenoid valve (coil: 22 mm) - G1/8" threaded ports
* NC/NO single solenoid valve (coil: 22 mm) - G1/4" threaded ports
* NC single solenoid valve on CNOMO-base with manual override (coil: 22 mm)
* NC solenoid valves (coil: 22 mm) on manifold without manual override
* NC solenoid valves (coil: 22 mm) on manifold with manual override
* NC/NO solenoid valves (coil: 22 mm) on multiple sub-bases
* Single manifold for 15 mm NC solenoid valve
* Manifolds for 15 mm NC solenoid valves
|
|
|
Drawer valves to elettropneumatico drive. 3/2-5/2-5/3; attacks G1/8-G1/4-G1/2. Tensions 12V DC 24V DC, 24V AC, 110V AC, 220V AC
|
|
|
|
