|
|
* Fluid: air/inert gas
* Operating pressure: 1.0MPa
* Effective area (Cv factor): 6-8mm 2 (0.33-2.11)
* Coil rated voltage: 12, 24VDC; 100, 110, 200, 220VAC
* Ambient temp: -20° to 60°C
* Fluid temp: -10° to 60°C (no freezing)
|
|
|
|
|
|
The Pneumatic Solenoid Valves 820 Series are NC 2/2 type.
The research about materials and new technological solutions allowed the realization of a shutter solenoid valve with an extremely simple operation principle and with avant-garde dynamic characteristics. The mass of the moving elements has been reduced to the minimum and every inner friction has been eliminated: in this way, we obtained response times of milliseconds and an operation life over 500 million cycles.
Due to the possibility of controls of speed-up type, their dynamic characteristics are even more improved. Standard solenoid valves with 24 VDC control have a response time lower than 5 ms in opening and 2 ms in closing, with a maximum operation frequency of 200 Hz. On the contrary, solenoid valves with speed-up control have a response time lower than 1 ms, both in opening and in closing, with a maximum operation frequency of 500 Hz.
Besides high-speed characteristics, solenoid valves 820 Series offer flow rate values up to 180 dm3/min. (ANR), with feeding pressure from 0 to 8 bar.
Controlling the valve through either PWM (Pulse Width Modulation) or PFM (Pulse Frequency Modulation) technique, it is possible to vary the passing flow rate and to obtain, in this way, a solenoid valve, having a proportional flow rate.
820 Series is available both in-line assembly and sub-plate version , equipped with such accessories as multi- position manifolds or speed-up driver boards.
|
|
|
|
|
|
Product Details
2/2, 3/2, 5/2, 5/3 Explosion proof solenoid valve
ATEX, CCOE, CMRI, DGMS, INMETRO Approved
Exd IIC T6 IP 67
AL & SS enclosure
We have complete range of Explosion Proof solenoid valves which are having following qualities,
•Different materials (Brass, SS316, Aluminium) available
•Larger range of orifices (from 0.8 mm to 80 mm)
•Solenoid with Explosion proof enclosure ( ATEX, INMETRO, UL, CCOE, ISI approved)
•Low power (5 W and 0.4W) solenoid coil available
•Intrinsically safe solenoid coils with circuit available
•All different constructions i.e. Diaphragm operated, Piston operated, Internal/ External Pilot operated, Spool design, Puppet design, Zero differential solenoid valves etc. are available
•Also Pneumatic and Magnetic Latching coil with Exd enclosure available.
•Also Manual Reset valves and Low power valves are available with Exd enclosure.
•We are famous for manufacturing custom made valves at very competitive price.
•We are the suppliers to Indian Railway, Power plants, Refineries, cement plants, Pharma, etc.
|
|
|
Pneumatic distributor TC08: 800 Nl/min 5/2, 5/3 in G1/8. 800 Nl/min. Direct connection or associable DIN C or M8. Is appropriate for all the applications. Pneumatic distributor TC15: 1500Nl/min 5/2, 5/3 in G1/4. 1500 Nl/min. Direct connection or associable DIN C and M8. Is appropriate for all the applications. Great flow.
|
|
Modular Manifold
10-32 & 1/8 NPT 2, 3 & 4 Way Valve Series 3853
Composite Solenoid Valve, 2 & 3-Way
Normally Closed or Normally Open
Hex Body
1/8 & 1/4 NPT 2 & 3 Way Valve Series 38MP
Composite Solenoid Valve, 2 & 3-Way
Normally Closed or Normally Open
18 Series
1/8 NPT 2, 3, & 4 Way Valve Series 3953
Stackable Composite Solenoid Valve
14, M14 & 34 Series
1/4 & 3/8 NPT 2, 3 & 4 Way Valve Series 3500
1/4, 3/8 & 1/2 NPT 2 Way Normally Closed/Open
12, 12A, 12B & 38 Series
3/8 & 1/2 NPT 2, 3 & 4 Way Valve Series 3510
1/4, 3/8 & 1/2 NPT Composite 2 Way Normally Closed/Open
|
|
The spool valves and mini spool valves are available in ISO 1,2,3,4 and ISO 01,02 standardized and non-standardized versions. With pneumatic or electropneumatic control (integrated or via CNOMO pilots), they provide an extended service life of 30 million cycles.
The non-standardized versions give priority to:
- High size/throughput ratio
- Assembly in line or on multiple subbases
|
|
5/2, 5/3 in G1/8. 800 Nl/min.
Direct connection or associable DIN C or M8.
Is appropriate for all the applications.
|
|
5/2, 5/3 in G1/4. 1500 Nl/min.
Direct connection or associable DIN C and M8.
Is appropriate for all the applications. Great flow.
|
|
|
Metal Work offers a full range of valves and solenoid valves to meet all the possible requirements regarding compressed air supply, cut-off and regulation. The range of conventional valves with in-line couplings is available in four different types of actuation: mechanical, manual, pneumatic and electro-pneumatic. Standard valves come with either pneumatic or electro-pneumatic actuation. A comprehensive range of accessories including bases, manifolds and adaptors makes this valve range extremely versatile. All solenoid valves can be equipped with low power absorption solenoids. A new type of Mini Valve serie Mach is available with multiple electrical connector as well as the provision for interconnection with fieldbus systems.
|
|
2005 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O and Profibus DP.
2012 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O and Profibus DP.
2035 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O, and Profibus.
|
|
A05/A12 ADEX VALVES
Miniature high flow body ported and manifold valves
5/2 and 5/3 configurations
Ultra fast response times
10mm and 15mm Body widths
Threaded or push-in connections
Single sub base or IEM manifolds
Low power solenoids
Collective wiring system
|
|
SX
The SX series unique design combines both solenoid assemblies (when using double solenoid 2/3 position) on the same side of the valve, opposite the ports, allowing for greater space savings and simplified wiring access. The SX series valves are available with numerous manifold options which allow for easier installation and improved operation.
|
|
The spool valves and mini spool valves are available in ISO 1,2,3,4 and ISO 01,02 standardized and non-standardized versions. With pneumatic or electropneumatic control (integrated or via CNOMO pilots), they provide an extended service life of 30 million cycles.
The non-standardized versions give priority to:
- High size/throughput ratio
- Assembly in line or on multiple subbases
|
|
Reduced format - optimised flow - clean design: a fixed-grid valve terminal for the electronics and mechatronics industry. With a maximum of 16 manifold integrated valves in a 10 mm fixed grid.
• Width 10 mm
• Valves: 5/2-, 5/2-way double solenoid, 5/3-, 2 x 3/2-, 5/3-, 2 x 2/2-, 1 x 3/2-way with external air supply
• 4, 8, 12 or 16 valve positions
• Pressure range -0.9 ... 7 bar
• Standard nominal flow rate 170 l/min
• Fieldbus connection DeviceNet
• Protection class IP40
|
|
... a step ahead of the solenoid valve.
Use Piezo-technology characteristics for your applications.
HOERBIGER progressive technology of Piezo valves is used successfully and approved since many years:
- Control high flow rates and pressure with minimum electrical output
- The compact shape , the low weight and absence of self-heating allow simple integration
- Short switching times and high dynamics improve the cycle times and productivity of your application
These features characterise the technology of the Piezo switching valves:
- Minimum power input
- Short switching times
- Long life span.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
