|
|
DION® FR 840-820 is a halogenated fire retardant laminating polyester resin containing fillers. The resin is accelerated and thixotropic.
DION® FR 840-820 has a relatively high viscosity due to the amount of filler added. The resin can be laminated by hand lay up or spray up equipment.
Approvals on fire tests:
•NPF 92-501 Class M 1
•NFF 16-101 Class F 2
•BS 476 Part 6/7 Class 1/0 |
|
| 385PA Fire retardant resin ISO/Het Acid Thixotropic 10 67 Class 2 BS476 Pt 7, Ext.SAA. BS476 Pt 3 Light stabilised dibromo neopentyl glycol polyester resin for high clarity sheeting |
|
POLYLITE® 720 M800 is a medium reactive isophthalic polyester resin with generally good mechanical strength, impact strength in particular.
POLYLITE® 720 M800 is specially designed to resist water, oil, and less aggressive chemicals, and modifications of this are specially suitable for production of tanks, pipes etc, as well as marine applications and other water and sewage applications.
POLYLITE® 720-M880 contains special additives which improve the working environment during and after application due to substantially reduced styrene evaporation. The resin contains wax which gives the cured laminate a tack free surface.
POLYLITE® 720 M800 is designed for hand lay up and spray up applications.
Approvals:
POLYLITE® 720 M800 is approved for boat production by Lloyds Register of Shipping and Det norske Veritas (DNV).
Availability:
Europe/ Middle East/ Africa |
|
POLYLITE® 32166-16 is an unsaturated polyester casting resin developed to produce non-gel coated, solid surface products. Because POLYLITE® 32166-16 is based on isophthalic acid and neopentyl glycol, it behaves similar to a high-quality gel coat which is resistant to discolouration after continuous exposure to water.
POLYLITE® 32166-16 is a pre-accelerated, rigid, medium reactive, low viscosity resin.
POLYLITE® 32166-16 is UV stabilized, stain resistant and is methacrylate modified.
APPLICATION
Room temperature curing of Solid surface.
The use of vacuum is strongly recommended in the manufacture of densified, solid surface products.
FEATURES BENEFITS
Acrylic Modified for higher performance.
Based on isophthalic acid and neopentyl glycol. Only slight bleaching after continuous exposure to
water.
Good stain resistance.
High heat distortion temperature.
Superior thermal shock performance.
• Medium viscosity - Permits high filler levels
• High solids content - Excellent filler suspension
• Specially promoted Light Colour
• Controlled gel and cure drift.
• Fast production cycles. |
|
DION 600-060 is a high reactive one-pack - LP – system especially designed for Pultrusion. The resin is based on Isophtalic acid and standard glycols.
FEATURES AND BENEFITS
High reactivity and low viscosity
Good heat resistance
Can be used for Class F (Thermal heat Index 155°C-180°C) laminates
Good fiber wetting properties
Surface smoothness, dimension stability and reduced internal stress cracks
AVAILABILITY
Europe |
|
| Tough, flexible, unsaturated urethane acrylate in styrene monomer Low viscosity resin with a rapid cure Tough, impact resistant, laminating resin Thixotropic Laminating Resin |
|
POLYLITE® 516-M880 is a Low VOC polyester resin with good mechanical properties suitable for all market segments.
POLYLITE® 516-M880 is accelerated and thixotropic and specially designed for hand lay up and spray up applications.
Features and benefits
Low styrene content, <35%
o Reduced shrinkage
o Improved surface aspects
o Reduced styrene emission
Good fibre wetting properties
o Easy lamination and air release
Approvals:
POLYLITE® 516 M880 is approved for boat production by Lloyds Register of Shipping and Det norske Veritas (DNV).
Availability:
Europe/ Middle East/ Africa |
|
| 1381PA Heat & Chemical Resistant Polyester Resin Water fillable polyester resin Low styrene thixotropic spray viscosity polyester resin Polyester resin for Solid Surface Casting |
|
| 790 Low profile polyester resin designed for use in RTM High clarity low viscosity casting resin Prefilled low viscosity casting resin High clarity low viscosity casting resin |
|
POLYLITE 31660-02 is a high reactive orthophtalic polyester resin with medium viscosity. The resin is especially designed for SMC/BMC.
The resin is mainly used, together with Norpol high polymer additives, for low shrink or low profile applications.
FEATURES AND BENEFITS
•High filler loads possible
•Excellent thickenable with MgO
•Usable in a wide range of applications, from Standard up to Low Profile
•Excellent surface properties and high gloss
•Consistent batch to batch performance
•High mechanical properties and heat distortion temperature
•Low separation and improved pigmentability
AVAILABILITY
Europe |
|
| To cope with annoying brown, opaque resin flow that hides the aesthetic and 3-dimentional feelings of carbon/plated woven fabrics, EPO-622TM can provide you an excellent solution. With no change of curing parameters under current medium temperature (at 150°C) curing process, EPO-622TM can impart a shinny and transparent skin to the cured products as well as no 'white spot' after sanding with water. |
|
POLYLITE® 33542-60 is a pre-promoted, pre-filled, unsaturated polyester laminating resin suitable for the construction of GRP tooling. This resin is formulated for room temperature cure using MEK peroxide catalyst, and extra stabilized for warmer climate.
POLYLITE® 33542-60 represents advancements of the successful Polylite Profile Tooling system, maintaining all the properties the original resin, with the convenience of a single product used with a conventional catalyst.
Features and benefits
• Reduced tool building time up to 80%
• Significantly reduces labour costs
• Prototype tools can be made quickly and economically
• Gets tools into production sooner
• Low Shrinkage
• Tools reproduce master exactly
• Resulting tools are stress free
• Print-through and surface distortion are eliminated
Availability:
Europe/ Middle East/ Africa |
|
| ... products without technical information |
| |
|
|
