|
|
Whether for stock, logistics and distribution, assembly lines and industrial production or for transportation logistics, traffic-control systems and object-positioning - Siemens A&D has always the suitable identification system.
The clever electronic RFID-systems SIMATIC RF with perfect coordinated components identify safely, quickly and efficiently. The non-contact data transfer offers high industry efficiency and the simple systems integration allows an efficient integration into the automation as well as into the IT-field.
|
|
The OP Handheld is a portable lightweight unit with the ability to interface with the OP series read/write tags. The OP Handheld is powered by 2 AA rechargeable or alkaline batteries and has the following features:
LCD backlit display
(2) 112 Byte internal buffers
auto power off
remote read/write wand.
The OP Handheld can read or write 1 block (4 bytes) to 28 blocks (112 bytes) of data within BALOGH OP Series TAGS. The OP Handheld utilizes the PSION Workabout hand held computer, OP Series RFID Wand with Internal Transceiver, and BALOGH custom RFID software.
|
|
CribMaster Mobile PC's / Bar-Code Scanners
CribMaster Mobile PC's / bar-code scanners come complete with both CM Radio and CM Scan software licenses and a support agreement which means a replacement is provided if repairs are needed. Other accessories are provided depending on the scanner you choose. These scanners are the most durable scanners available and are perfect for most industrial applications. These scanners are available with and without a pistol grip and allow CribMaster users to:
Bar Code or Key Enter Data
Issue and Receive Items
Return Used Items
Cycle Count
Quantity Adjustments
Assemble Kits
Replenish Kits
Transfer
Relocate
Log labor time against work orders
Communicate Real Time with CribMaster
Communicate in Batch Mode
Expand Coverage and Range as Needed
|
|
| ... products without technical information |
| |
FireNET (9th Edition)
Analog Addressable Fire Alarm Control Panel
STANDARD FEATURES
UL 864 9th edition approved
Analog design using Hochiki's advanced DCP protocol for fast and robust communication
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
Uses standard wire, no shielded or twisted pair required on SLC loops
Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
4 on board Class B (style Y) NAC circuits rated at 2.5 Amp each
Programmable sensitivity levels per device & automatic day/night sensitivity modes
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
2 or 4 loop versions (800 addresses/sub-addr. max.)
Dual RS-485 bus for panel network
2 built-in RS-232 interfaces for programming via a PC and serial printer interface
5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
500mA of auxiliary power available rated at 24 VDC
Loop Explorer Windows® configuration utility
*500 network wide software zones
Network Capability of up to 64 panels
RS485 slave bus for expansion - up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 16 FN-4127-IO boards
Auto-learn feature
Built in help and alarm information screens
Fire Drill test function
Walk Test function
Alarm Verification feature
FireNET is UL listed for Central Station Service when used with the Bosch D9068 contact dialer
Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including: *Cause & Effect action, *Disable function configuration, *Test mode configuration
|
|
| ... products without technical information |
| |
The AuraSys Light Family offers a range of advanced control panels for a wide range of applications for residential and light commercial intrusion alarms. Exceptionally easy to operate and install, these Model’s broad range of features, allow precise customization of the system. Advanced on-board
features include built-in telephone modem, backup battery charger, siren driver and more. AuraSys Light Family is compatible with Rosslare’s MatrixBUS keypads and wireless expansion modules (L-4 and L-6 only). The AuraSys Up/Downloader software is available for ease of installation and maintenance of local and remote connections.
Short Description of Models
The AuraSys Light Family L2, L4, & L6 Models
exhibit the following flexibility:
• AuraSys L2 – The unit is wholly self-contained,
2 onboard zones, key-switch, space for backup
battery; the user interface includes status
indicators and sounder
• AuraSys L4 – Available in 2 models, selfcontained
option and PCB only, with 4 onboard
zones, expandable with additional 4 doubled or
wireless zones, 8 users, 150 event-log size, 4
keypads (LCD and LED)
• AuraSys L6 – Available only with PCB option, 6
onboard zones, expandable with additional 6
doubled or wireless zones, 10 users, 250 eventlog
size, 4 keypads (LCD and LED)
|
|
Rosslare’s HomeLogiX is a powerful 40 zone wireless control panel for residential and light commercial intrusion alarms. It is the best solution for solid intrusion security without invasive installation.
This advanced state-of-the-art unit features automation with event scheduler, built-in highspeed PSTN communicator, backup battery charger, and a driver for siren speaker. The HomeLogiX control panel is compatible with a full range of Rosslare’s wireless sensors and remote control accessories.
Main Feature:
• 39 zone wireless control panel
• One supervised wired zone and tamper inputs
• 21 user codes: one installer, one master, and 19 users
• Two-line LCD display for alerts and sessions
• Local and remote telephone voice-guided sessions for status messages, alerts, and control options
• User message recording/playback
• Custom zone descriptions (textual and voice)
• Telephone voice interactive menus
• RF signal strength level detection for RF test and accurate jamming detection
• Scheduled arming
• Proprietary anti-collision RF protocol
• Easy to operate and configure.
|
|
Wall-mounted consoles and remote control units are the instruments for "communicating" with the Tecnoalarm security systems. You may choose the simple ones for traditional domestic applications, or one of the more complete if you have far-reaching requests for customization in terms of arming and disarming of zones at preset hours with daily or weekly frequency.
The interface man-control panel has been made extremely simple and natural thanks to service indications viewed on display and a comprehensive library of voice messages that allert, help and advise according to an explicitly user-friendly logic.
The comfortable numerical keypad with special system keys, makes every process easy and quick.
|
|
FireNET (9th Edition)
Analog Addressable Fire Alarm Control Panel
STANDARD FEATURES
UL 864 9th edition approved
Analog design using Hochiki's advanced DCP protocol for fast and robust communication
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
Uses standard wire, no shielded or twisted pair required on SLC loops
Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
4 on board Class B (style Y) NAC circuits rated at 2.5 Amp each
Programmable sensitivity levels per device & automatic day/night sensitivity modes
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
2 or 4 loop versions (800 addresses/sub-addr. max.)
Dual RS-485 bus for panel network
2 built-in RS-232 interfaces for programming via a PC and serial printer interface
5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
500mA of auxiliary power available rated at 24 VDC
Loop Explorer Windows® configuration utility
*500 network wide software zones
Network Capability of up to 64 panels
RS485 slave bus for expansion - up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 16 FN-4127-IO boards
Auto-learn feature
Built in help and alarm information screens
Fire Drill test function
Walk Test function
Alarm Verification feature
FireNET is UL listed for Central Station Service when used with the Bosch D9068 contact dialer
Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including: *Cause & Effect action, *Disable function configuration, *Test mode configuration
|
|
- Identical main and counter spindle for complete machining
- Cycle time reduction by simultaneous machining at the main- and counter spindles
- Y/B-axis option for inclined, off-center drilling and milling
- 6-tool magazine for the additional milling spindle
- Quick, simple tool measuring on the machine
- Gantry workpiece receiving attachment for workpiece loading and unloading
|
|
| ... products without technical information |
| |
Pattern control AS 50 AK
The »AS 50« is a distance-based pattern control for precise applications of adhesive at variable speeds. The control permits to activate up to four glue heads for the application of hotmelts and coldglues in programmable patterns. In addition the »AK«-version is featuring inputs for checking of the applied glue by means of infrared or coldglue sensors.
Pattern control AS 60 AK
The «AS 60» is an extendable pattern control of modular design. It is suitable for precise adhesive applications at all speeds with inspection of the glue application on hotmelt and coldglue systems.
|
|
| ... products without technical information |
| |
... see all the products in the category
Panel PCs
|
| ... products without technical information |
| |
|
|