|
|
- Continuous Rotation
- Ultra-High Resolution
- Velocity up to 90 deg/sec.
- Preloaded Worm Drive for Zero Backlash
- ActiveDrive™ DC-Motor, Stepper-Motor and Manual Versions
- Compatible with Leading Industrial Motion Controllers
- Direction-Sensing Origin Switch
M-06x series rotation stages are equipped with ultra-precise, ultra-low-friction, spring-preloaded worm gear drives allowing unlimited rotation in either direction. Models M-060 feature a 60 mm diameter turntable, models M-061, a 100 mm table and models M-062, a 120 mm table. One manual drive and three motor drives (four with M-062 models) are available.
|
|
rotary stage
rotary stroke up to 9 mrad / 11 mrad
high dynamical performance
high planar behavior
well centered, defined axis of rotation 0,2 µrad / 0,02 µrad resolution
3mm free aperture
integrated temperature compensation
applications:
fast scanning
lithography
laser beam steering ...
The ROTOR 10 and the ROTOR 10 SG one axis low voltage rotary stage is a development within our ultra-fast ROTOR- line. It provides a long steering and scanning range of up to 11mrad.
The well defined axis of rotation is located centrically.
An incorporated free aperture allows axial beam applications also.
|
|
Rotary Tables are a convenient, accurate method of positioning or rotating a payload. These tables use a rugged worm and gear drive design with a central rotating ball bearing. We offer four rotary tables in two designs. Each table has a different gear ratio.
Features
-a hollow spindle or clear aperture in the center
-360° scale, graduated knob,
- a readily accessible adjustment to minimize gear backlash
|
|
|
Zaber's T-RS Series of precision motorized rotary stages are stepper motor driven, worm gear rotary stages capable of a full 360° rotation. Each rotary stage has an integrated microstepping stepper motor controller, offering high resolution daisy-chainable operation.
|
|
|
Aerotech air bearings are perfect in semiconductor equipment, fiberoptics, photonics, and other critical industrial automation applications. Our air bearings incorporate an active preload on both vertical and horizontal surfaces. Opposing thin-film pressure maintains the bearing nominal gap tolerance. This design, in addition to the large air bearing surface that distributes the load over a large surface area, results in outstanding stiffness that is ideal for heavy or offset loading.
|
|
Aerotech photonics and fiberoptics nanopositioners are perfect for the high-volume manufacture of photonics and fiberoptics components and systems. Our fiberoptics positioning systems utilize Aerotech%u2019s own brushless linear servomotors for the maximum performance in the most compact package. We manufacture many models of drives and motion controllers to provide a complete fiberoptics and photonics manufacturing package that is virtually maintenance-free and available for 24/7 operation. Aerotech nanopositioners feature the highest closed-loop resolution available with up to six axes of coordinated motion.
|
|
Rotary-linear tables are combinations of the proven rotary table series
FIBROTAKT,
FIBRODYN,
FIBROPLAN,
FIBROMAX or
FIBROTOR
and one linear axis
in various versions and designs
Transport loads up to 100t
|
|
|
|
|
|
Dynamic Structures and Materials (DSM) offers custom design capabilities for rotary and linear flexure-guided stages required for precision motion control and positioning applications and for challenging environments. DSM's flexure mechanism designs are used in unique positioning applications where backlash- and stiction-free performance are critical.
The 3-axis optomechanical positioning mount pictured here is a representative example of DSM's design capabilities for flexure-guided stage design. A custom, multi-axis design required three axes of flexure-guided motion for a 4 kg payload. The design requirements included ± 2 mm of linear travel adjustment in one axis and ± 2° of rotational adjustment in two additional axes. The assembly's design minimizes undesirable motion during temperature transients and shock loading.
DSM designed the optical mount using a titanium and aluminum construction. Fine thread screw adjusters provide manual adjustment capability, although the design lends itself to being easily reconfigured for motorized position adjustment. Pre-load springs and flexure pivots provide return force.
|
|
| ... products without technical information |
| |
The RT404-FLEXII series of rotary table dispensing turntables provides an efficient method of dispensing a circular pattern on areas that are difficult to access. The tilting Z-axis allows controlled rotary dispensing on an angle.
Features
• Dispenses from syringes, cartridges, or valves
• Rotation of 0-900º
• Adjustable Z-axis including tilt control
• Variable speed table
• Simple to set up and operate
• Fully programmable for perfect dispensing
• No computer skills required
|
|
Customized rotating table for laser marking taps and fittings
It is suitable to be integrated both with YAG or FIBER YLP laser marking systems.
The table is protected by a suction fume box in respect of EC rules.
The simple and essential push buttons are managed by mobile PC whilst the driving commands are placed in the working area ( adjustment and production).
|
|
Möck twin rotary table (Patent No. 19950030)
For the reduction of cycle times - not only in MÖCK machines - we offer our patented twin-rotary table also as component for machine-builders.
Accordance of creativity and technology
Loading and unloading of one rotary table while the other one is in working position
Loading and unloading from one position or separate positions
Loading and unloading of both rotary tables in one position or separate positions
Clocking of one rotary table during the other one processes
Very short switching times at low positioning rate
Workpieces do not have to be clamped
Workpieces only have to be positioned
Raster drillings for holding of workpieces and devices
Low mass-moment of inertia by high-strength aluminium
|
|
|
OT-LAS has setting up Mistral, a system that completes and diversifies the existent production range. The flexibility of Mistral is the competitive answer to the most varied line production requirements. Dedicated and with the possibility of personalization the hardware accessories supplement themselves in a powerful and multipurpose software management. Entirely developed and realized inside the group it combines efficiency and flexibility.
|
|
Because of their characteristics the rotary-table shotblasting machines can easily be incorporated in diversified machining, adapting to the treatment of various parts of different shape and type. Positioned on the moving table the articles are uniformly covered with a wide jet of shot launched by centrifugation by one or more turbines.
Our production range covers from a minimum table diameter of 500 mm to a maximum of 2400 mm. On the same principle we produce a 3-table satellite machine, called "T3/100", with tables of 1000 mm each, suitable for delicate articles and large-scale production.
|
|
The rotating table shot-blasting machines are the most simple, versatile and economic solution to the surface treatment needs.
The parts are loaded on the rotating table: their lateral and top surfaces are subject to the shots thrown by the turbines.
The table diameter can vary from 500 to 2500mm, with a load capacity up to 1500 Kg.
The machine does not require a pit, and is supplied complete with a self-cleaning dry cartridges dust collector.
|
|
|
Our production range covers from a minimum table diameter of 500 mm to a maximum of 2400 mm. On the same principle we produce a 3-table satellite machine, called "T3/100", with tables of 1000 mm each, suitable for delicate articles and large-scale production.
|
|
When it is difficult, even impossible, to hang the parts to be treated, or even when they are too fragile to be treated in bulk and finally when the production remains weak, the part can be treated while being exposed on a s3eance table which is exposed to the sheaf of the turbine.
This exposure often requires a reversal of the part to expose all the faces.
Our standard range of shot-blasting machines with s3eance table RT goes from tables of diameter 1000 to 2500, for heights useful of parts going from 600 to 1200 and functioning with 1 to 3 turbines.
|
|
International Surface Preparation offers a wide variety of wheel blast equipment in several configurations. Table wheel blast machines are one of the most versatile.
Table wheel blast machines have a table that rotates beneath a blast wheel, or series of blast wheels within a cabinet enclosure. Table machines process a batch at a time. Occasionally parts may require a two step blast cycle - once the first step is completed the parts may need to be re-oriented on the table to allow for complete coverage from the blast wheel.
These machines are well suited for parts that are fragile and part on part impingement is unacceptable. Table systems also are good candidates for parts that are large or do not lend themselves to tumbling.
Standard table blast machines range from 48" diameter table size up to 84". Table wheel blast models bigger than 84" diameter are available should your process require a larger machine.
|
|
| ... products without technical information |
| |
|
|
|
|
The washing machine with the component positioned on a rotating platform is the ideal system for washing small- and medium-sized mechanical pieces. The transport system consists of a daisy wheel mounted on an indexed table which, moving around a central pivot, brings the satellite holders at the ends of the arms to the different stages of treatment (washing, blowing and drying).
The rotating platform is conceived in such a way as to guarantee absolute precision in the positioning of the components to be washed. In addition, if necessary, each satellite component-holder can be made to rotate.
The special conception of the design allows optimizing space and therefore limited overall dimensions. This characteristic, together with the loading and unloading concentrated in a single position, makes the machine especially suitable for integration into a production line with island organziation.
In addition to compactness and precision, the washing machine with a rotating platform is distinguished by its exceptional reliability.
|
|
|
|
|
|
ROTATING PLATFORM WASHING MACHINES
The rotating platform washing machine is used to obtain a perfect cleaning of big dimension pieces (up to a cylinder sized 2,000 mm in diameter, 2,000 mm in height and of 7,000 kg in weight).
The platform, mole in solid structure, is equipped with an oleodynamic system for the introduction, rotation and exit of the pieces. The machine can be located on or under floor.
• Rotating platform with max load capacity of 7,000 Kg
• Closed cycle spray washing with warm water and detergent; cold or warm water rinsing
• Gas heating system applied on the tanks
• Rotating and movable spray nozzles
• Automatic control of the tank levels
• Filtering system of the circulating solution
• Control and management computerized system
Technical features:
- closed cycle washing with detergent and water up to 80°C
- closed cycle rinsing with cold or warm water
- heating with burners connected to the tanks
- automatic feed of the cleaning solution with water taken from the rinse
- filtering system
- computerized management and control system
- overall dimensions 7,000 x 6,000 mm
|
|
|
They are eqquipped with washing equipment composed of mobile probes that strike internal areas that cannot be reached otherwise
|
|
| ... products without technical information |
| |
MRV
with NC-Superplus-D control
or Siemens 840D control or Fanuc* control
(*USA and Far East only)
The advantage offered by the compact, rotary grinding machines of the MR family over longitudinal table machines, particularly when it comes to grinding small and mass-produced parts or round parts, is that there is no need for reversing the worktable.
Grinding area 500 to 2000 mm table diameter
Spindle drive 11 kW to 26 kW (horizontal/vertical)
Distance table to spindle centerline 700/900/1100 mm
|
|
|
The BLOHM PROFIMAT MC and RT line has been developed with the aim to meet the "LEAN APPROACH" concept. It represents with a width of only 2000 mm (79") an extremely compact and heavy duty production grinding machine for universal application using the latest technology.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
