|
|
CoroMill® 245-18 is a robust cutter with large, thick inserts capable of heavy chip removal rates. This larger version of CoroMill 245-12 widens the choices available and will cover more demanding applications.
CoroMill 245-18 is light cutting making it the power-efficient first choice facemill for most ISO-P, -M and -K materials in the ISO 50 and 60 machining centres. It is capable of milling surfaces with excellent finish – particularly when used with wiper inserts.
Reinforced cutting edges for 6-8 mm deep cuts within a feed range of 0.2 up to 0.4 mm enable the cutter to mill blanks with forging scale and large variations in required depth of cut. Under favourable conditions a max cutting depth of 10 mm is achievable.
CoroMill 245-18 is available in diameters 80-250 mm as coarse, close and extra close pitch for maximum performance in different machining conditions.
|
|
The CoroMill 390 endmill offers precision performance in a class of its own. In many ways, the CoroMill 390 is the first high-precision indexable endmill. Playing in the same league as solid endmills.
The CoroMill 390 produces mirror finish surfaces and true 90° shoulders. Noise and vibration are reduced to a very low level.
|
|
OSG is proud to present our new line of WXS™ End Mills. These new super-coated end mills utilize nanotechnology and are specifically designed for milling at higher speeds and temperatures.
OSG’s patented WXS™ coating has an increased oxidation temperature. This permits higher spindle speeds, leading to faster cycle times. As a result, the increased SFM (surface feet per minute) extends tool life since the generated heat actually improves the surface hardness of the WXS™ coating.
In addition, the optimization of the substrate with the WXS™ treatment on a molecular level increases adhesion strength, thereby decreasing the possibility of chipping.
For more information on any of the WXS™ End Mills, please visit our online catalog:
|
|
HSM is not simply high cutting speed. It should be regarded as a process where the operations are performed by very specific methods and on high precision production equipment.
HSM is not necessarily high spindle speed machining. Many HSM applications are performed at moderate spindle speeds and with large sized cutters.
HSM is performed in finishing on hardened steel at high speeds and feeds, often 4-6 times conventional cutting data.
HSM is High Productive Machining of small-sized components in roughing to finishing and in finishing and super-finishing in components of all sizes.
HSM will grow in importance the more net shape the component become.
HSM today, is mainly performed on taper 40 machines.
|
|
5702VZ
High Speed Aluminum Machining
The highest performance aluminum routing cutter available on the market. All 5702 cutters are designed, manufactured and tested to EN ISO Standard 15641:2001. This ensures security at ultra-high speeds.
- Up to 45,000 RPM
- Only cutter available balanced at G2.5 @ 30,000 RPM
- Industry standard radii - 2mm to 6mm
- Stocked HSK and cylindrical shanks
|
|
CoroMill 490
Sandvik Coromant has launched the first of a new generation of shoulder mills, the CoroMill 490, which reduces machining costs by up to 25 per cent. CoroMill 490 is a high-precision tool for applications where reduced depths of cut and less final machining are required, as with the near net shape precision forgings and castings used by machine shops for higher productivity. Less, but more precise, work is needed on these castings and forgings. This is possible with the four edge insert design of CoroMill 490 and reduces substantially the cost per component for customers.
CoroMill 390
A new range of damped silent tools from Sandvik Coromant is bringing substantial performance benefits to complement the existing range of long and slender CoroMill® 390 milling cutters. Integrated dampening offers more efficient, vibration free machining to improve the performance of cutting tools working in deep cavities and pockets. The stabilization of the machining process in this way provides wider machine utilization for face and shoulder milling, especially in long overhangs and will boost the capabilities of long reaching tools.Reducing vibration in often tricky situations provides the confidence needed to increase the cutting parameters without compromising work piece quality. This enables the achievement of greater machining success with the CoroMill® 390 - including improved component surface finish and longer tool life.
|
|
CoroMill 390 is the most versatile facemill on the market for better accessibility. It offers an opportunity to reach the best productivity for each specific type of operation - just by combining the most suitable cutter pitch with the most relevant insert geometry and grade.
CoroMill 390 is the first choice cutter for versatile facemilling.
|
|
Annular Cutters
Aluminum
Stainless steel
Steel
Blue "carbide hard" surface treatment
Universal shank
Fully ground extra large flutes
|
|
|
Onsrud is offering a new line of top loading cutters to be used on manual or CNC top loading engraving machines. The solid carbide cutters are made of premium micro grain carbide and use our proven cutting geometry to produce fast, clean cuts in plastic and aluminum materials. These tools will allow you to rout and engrave on a single machine. The tools will be offered with a variety of cutting diameters. Custom sizes can be made on request.
|
|
|
Routers for Fiberglass and Non-Metallic Materials in Fractional and Metric...Quality selection of Wood Routers
|
|
MEGAVANT HC90
- high feeds in 90° cutting angle operations
- suitable for roughing and finishing with the same insert
- high volume machining high rentability
Shoulder milling cutter EP90
- tangential design with ENHQ-insert
- "genuine" four cutting edges
- ENHQ-insert can be unded in other AVANTEC milling tool systems
- large chip chambers
- suitable for materials that form long continuous chips
Shoulder milling cutter EV90
- tangential design with ENHQ-insert
- "genuine" four cutting edges
- reduction of costs because of reduction of inserts
- smaller chip chambers utilizing a fine pitch design
- very suitable for unstable or thin parts
|
|
Side milling cutter TN18 / TB18
- a balanced smooth cut is provided by using right an left hand inserts
- high precision of radial and axial run out
- very precise width of cut
- slot ground because of ground T-form insert
Side milling cutter tangential EN18 / EB18
- ENduro-insert guarantees 4 "genuine" cutting edges
- fine tooth pitch through tangential ENHQ insert style
- smooth cutting through cut division of left- and right handed inserts
|
|
CoroMill® 327 and 328 grooving cutter
For use in internal machining of eccentric components e.g gearbox casings, high volume assembly, mainly on machining centres.
A universal cutter for use in all materials PMKNS
Sharp cutting edges for high quality grooves
One grade; PVD coated GC1025 for all materials
Multiple edges for high productive economic machining
Operations:
Internal grooving
Slot milling
Threading
CoroMill Plura thread milling cutters
Just one tool for most threads with the same pitch:
Same tool for right and left hand threads
Same tool for a wide range of thread diamters
Full thread also close to the bottom of blind hole
The smallest internal thread size each tool can produce is shown in the ordering information in the Main catalogue . The same thread mill can also be used for any larger size threads of that same pitch, as indicated also on the ordering page. The shortest possible tool is the best choice whenever possible.
|
|
RESISTOR PEARL is the latest up-to-date milling technique from Carmon:
PEARL coating is the combination of a layer of hard coating (TiCN) with a lubricating layer (Movic). The first layer gives, with its hardness (3.500 HV), a strong protection against wear, while the lubricating layer reduces friction, thus achieving excellent chip removal. Particularly suitable for stainless steel machining, PEARL is now being applied on the Carmon premium quality ripper cutters of the RESISTOR series (ASP2052).
We exhibit at MACH-TOOL 08 in Poznan (Poland) from 9th to 12th June 08. We look forward to wellcome you in our stand no.38 in the Hall 9.
|
|
A Complete Line of Products, Full of Systematic Advantages
Here is the best argument straight away for Pokolm-Voha solid carbide end mills: We use our own end mills to produce a large share of our milling cutter bodies and arbors -and for good reason. Our solide carbide end mills are famous for their precise concentricity, plus they are suitable for shrinking processes, and have a full range of advantages in high-speed and extreme milling operations.
We use specially selected materials and have suppliers and coating partners who are integrated in our development and production process. This creates the most favorable environment for our highly specialized staff to produce first-claas, high-quality end mills using the latest high-teh grinding machines.
|
|
|
Complexe tooling systems will be modulated during the machining process. This is the reason why they belong to the premieure league of special tools. The manufacturing of these tools needs long experiences in special tool design and construction and a high precision production.
|
|
PCD form tools for machining automotive parts and light alloys (Non ferrous materials). Machining internal shapes, profiles chamfers, threads, etc. ...
We also produce all kind of PCD tools for machining external diameters of aluminium parts like; PCD external profile milling mandrels or PCD tools working by interpolation motion.
All PREZISS DIAMANT PCD tools can be manufactured in any kind of clamping system and tapers; SK30, SK40, BT30, BT40, HSK FORM A, E, C, F, cylindrical shanks, Radial/axial adjustment system, etc. …
|
|
|
MBG diamond grinding products offer the most tightly controlled properties and characteristics of any grinding diamond in today's market. From the most well-defined crystals to highly friable irregular shapes, the MBG product line offers tailor made diamonds for a wide range of grinding applications in non-ferrous materials.
|
|
The new 7791VS family of plunging cutters is ideal for fast metal removal in aerospace and mold applications. Plunging operations are faster and more productive than profiling operations.
- Ideal tool for step over-plunge-slotting and core
plunging.
- High metal removal rate and excellent chip
evacuation.
- Principally Z-axial cutting force minimizes tool
deflection and side forces.
- System extremely efficient in all roughing operations and deep
cavities.
- Ideal for aerospace and mould making industries.
- Wide range of grades and geometry for all applications.
|
|
|
Among the standard 1D/2D/3D millig cutter systems Kieninger is a specialist for machining aluminium and plastics with PCD and hardened steel or cast iron with CBN.
|
|
These tools stand out due to their simple, robust design, their excellent milling performance and quality, as well as due to their high efficiency. They are suited for high cutting speeds and feeds (HSC). The low weight and the few parts mounted simplify the handling.
At the center of the milling head are high-precise PCD inserts which can be adjusted very simply and rapidly.
|
|
PCD compact face milling head "IT-HEAD" of PREZISS DIAMANT for roughing and finishing operations in aluminium parts.
Specially suitable for high feed machining obtaining an outstanding surface quality.
Its monoblock construction conferes to the tool a very good stregth. This, combined to a high precision balancing turns this tool into a high performance PCD milling head with an extreme long tool life.
|
|
|
Among the standard 1D/2D/3D millig cutter systems Kieninger is a specialist for machining aluminium and plastics with PCD and hardened steel or cast iron with CBN.
|
|
7745 VOD Series
Stellram's most versatile cutter. A strong multi-purpose cutter excellent in high temperature alloys and stainless steels using 4mm or 6mm octagonal inserts for up to a 0.445" depth-of-cut.
7745 VS Series
Excellent in tool steels and cast irons. Exceptionally thick square inserts handle tough conditions. Design allows for recessing operations.
|
|
Miling cutter-point 7/15 mm
APPLICATION
Expander
Code: H001
Miling cutter-point 6/12 mm
APPLICATION
Shoe band
Code: H002
|
|
The MAPAL tooling progamme was completed by a wide range of highly qualified milling tools for machining all common materials. The various sizes consist of milling cutters with PCD inserts for non-iron materials as well as ISO milling cutters featuring tangential inserts for cast iron and steel.
|
|
|
|
