|
|
Fullcut Mills have a Positive high rake cutting edge for both radial and axial directions achieves smooth and quiet endmilling.
- Sharp cutting edge by both high radial and axial rake angles.
- Positive rake angle offering high toughness in a highly rigid integral body.
- FULLCUT MILL is offered in a variety of types, including with cylindrical shanks, integral tapers with simultaneous dual contact system.
|
|
ISCAR has a wide range of ball nose end mills.
Solid carbide cutters are available for the smaller diameter ranges.
Standard carbide inserts with indexable cutting tools begin at 8 mm (.315") and extend up to 50 mm (2.0").
Considerably larger sizes are available for special custom made orders.
FLEXFIT, a modular system, enables assembling a ball nose end mill to any of a variety of lengths, depending upon the application. This is an ideal solution for the die and mold industry.
Also available are end mills with round inserts for large sculptured surfaces and round corners.
|
|
ISCAR offers a wide end mill range using a variety of different types and sizes of inserts. Included are the QUAD2000 square inserts in
6 and 10 mm (.236 and .394") sizes; the HELI2000 inserts in 10 and
15 mm (.394 and .591") for easy cut and accurate and high surface finish;
MILL2000 inserts in 13 and 20 mm (.512 and .787") sizes for roughing at high feed milling; and the versatile CHAMMILL milling tools which can carry four types of inserts in the same pocket.
Mill-drill cutters, chamfering tools, profiling end mills with round milling inserts, solid carbide end mills and thread mills are also available.
|
|
Tests were carried out to compare the new S333 roughing cutter with a standard roughing cutter on AMG 1.5. On the S333, the combination of the toughness properties of the carbide material, the Super-G coating and the geometry of the tool (unequal helix, asymmetric chipbreaker profile) resulted in less tool vibration and less wear on the tool, compared to the standard roughing cutter. Consequently for the S333, the quality of the surface finish of the workpiece is higher and the tool life of the cutter is over 30% longer, resulting in less tool changes.
|
|
|
S-Carb 2 and 3 flute End Mills and the patented 2 flute Ski-Carb end Mills are designed for Aluminum and non-ferrous materials. The S-Carb is available with Titanium DiBoride (TiB2) tool coating
|
|
|
Z-Carb End Mills for Ferrous Applications...Reduces Machine Vibration...Improves Dimensional Control...Increases Cutting Depth and Feed Rates...Improves Surface Finish...PATENTED Unequal Helix Geometry.
|
|
Jabro Tools - premium solid carbide tools
The Dutch solid carbide tool specialist Jabro became a member of the Seco Tools group in 2001. The company has a full range of high quality solid carbide tools for the Aerospace, Die & Mould as well as many other precision engineering segments. Jabro's product range is a natural extension of Seco's products.
"Completion of this transaction is of great significance for Seco and part of the continuous process to strengthen Seco's competitiveness within important markets and customer segments," says Lars Renström, President and Chief Executive Officer of Seco Tools.
With 120 employees Jabro is among the leading companies in the product area solid-carbide end mills - a fast-growing area primarily focused on the aviation and die and mold industries. Through this acquisition, Seco Tools expands its product offering to customers, thereby strengthening its competitiveness in serving the above-mentioned customer segments.
|
|
The new CoroMill® 790 Al Endmill - the number one aluminium endmill on the market, designed, in all respects, for HSM performance.
The CoroMill 790 cutter has been developed to meet the extreme manufacturing demands of frame components for the aerospace industry as well as machining of deep cavities faced by die and mould makers. It is effectively used for operations such as steep ramping and circular interpolation in helix.
With inserts firmly secured by a unique design of the support face in the insert seat, possible consequences of high radial forces, generated at high speeds, can be eliminated.
This insert security also guarantees accurate location of the cutting
edges - almost eliminating insert tolerance errors and thus any resulting run out.
Together with the most stable mounting on the market - the Coromant Capto® - you have an unbroken chain of precision elements - from cutting edge to spindle nose.
|
|
V400 Finishing Ball Nose End Mills
The V400 finishing ball nose end mill brings greater accuracy and size control to contour milling. Ultra-precision ground inserts in a new, highly versatile PVD coated grade, VP5007, result in superior finishes and greater accuracy on a wide range of materials. Advanced insert technology combined with advanced cutter design makes the ValMILL 400 a superior performer in the die and mold industry, and a reliable producer wherever high quality machining is needed.
|
|
|
End mills for the metal cutting industry, mold makers, automobile and aerospace industry and production lines.
|
|
|
Large range of Solid Carbide End Mills...Fractional and Metric...Special End Mills upon request...In-House Tool Coatings
|
|
CoroMill Plura solid carbide endmills
The programme of CoroMill Plura solid carbide endmills includes tool shapes for most operations, in diameter ranging from 0.4 to 25 mm.
Find the right tool for your application in our wide assortment of solid carbide milling cutters. We offer you the right solution from High Speed Machining (HSM) over diemaking to general purpose milling, from roughing to super-finishing - in most materials whether it be in difficult-to-cut materials or very hard steels up to HRc 63.
The new kordell grade GC1640 is the next stage in optimized Plura milling performance. Sandvik Coromant offers this new grade for kordell mills and 50° helix variable flute design (VFD) with radial relief. The addition of coolant through the tool brings even more benefits in the application area.
|
|
Shank-end mill ES90
- tangential design with ENHQ-insert
- enters the cut softly and with ease
- minimazation of vibrations
- slim design for close spaces
Shank-end mill TS90
- both insert and cutter mating surfaces are precision ground
- perfect coupling of the insert and its slot
- maximum replacement accuracy
- exact 90° groove cutting
|
|
OSG is pleased to present our first-class line of Cobalt (HSS-Co) end mills. Our HSS-Co end mills have a higher hardness range than regular High-Speed Steel (HSS) end mills due to an 8% cobalt content, which results in increased tool life and overall performance.
HSS-Co end mills are designed to mill difficult-to-machine materials, and are more forgiving than carbide tooling. Where carbide has a tendency to break or chip in less rigid operations, HSS-Co is ideal for such applications.
OSG uses a premium HSS-Co substrate, while some competitor products utilize a more basic grade of HSS, resulting in reduced hardness and a decreased selection of materials for which their tools can be effective.
To view our wide selection of HSS-Co end mills, please visit our Online Catalog.
|
|
|
Granlund now launches a new series of single flute End Mills in solid carbide, for milling, contour-milling and boring in Aluminium, Plastics and Wood. Granlund has developed 3 models: EFA, EFP, and EFT. The singel flute End Mills are recommended for High Speed Cutting. All models are avaliable in the sizes 4, 5, 6, 8 and 10
|
|
|
High Performance End Mills from SGS Tool for tough Mold and Die applications. A wide range of sizes and uses.
|
|
|
For Maximum Stock Removal in Milling Operations on Mild Steel, Steel Alloys, Stainless Steel and Cast Iron...Fractional and Metric.
|
|
SERF (Sinusoidal Edge Rougher Finisher) design provides the benefits of a roughing mill with the edge quality of a finishing mill in a Polycrystalline Diamond double-flute tool on solid-carbide body.
The unique SERF geometry results in reduced impact forces during the cut resulting in longer tool life, less cutting force, greater feed rates and reduced noise.
Edge finish in fibrous composite materials is improved due to the overlapping sinusoidal edge pattern which is designed to impart a fiber shearing action during the cut.
Usage: Carbon Fiber, G-10 and other Fiberglass
|
|
|
|
