|
|
Exel is a leading manufacturer of composite profiles and tubes. We are specialized in customer-tailored solutions but we also have a wide range of standard tubes and profiles available. For any further details, please check our website: www.exelcomposites.net or contact e-mail: profiles@exel.fi
Glass fiber and carbon composites are ideal materials for many application areas because of their superior stiffness, high strength and low weight. Experienced design plus the additional benefits of warm to touch feel of the material and possibility for ergonomic shapes makes Exel composite tubes an unbeatable choice.
Exel has several technologies to produce shaft tubes: Pullwinding, Co-winding and Prepreg wrapping.
Depending on performance requirements we can design the tube structure based on carbon-, glass- or carbon/glass hybrid continuous fibers or fabrics.Exel is a leading manufacturer of composite profiles and tubes. We are specialized in customer-tailored solutions but we also have a wide range of standard tubes and profiles available. For any further details, please check our website: www.exelcomposites.net or contact e-mail: profiles@exel.fi
|
|
|
Sandvik composite tubes consist of two components, metallurgically bonded together. Therefore composite tubes are particularly suitable for applications where the conditions outside and inside the tube require properties that cannot be made by one material. By selecting the correct alloy for each component, the corrosion resistance and the mechanical properties are optimised and a tube that meets conflicting material requirements is obtained.
|
|
Exel is a leading manufacturer of composite profiles and tubes. We are specialized in customer-tailored solutions but we also have a wide range of standard tubes and profiles available. For any further details, please check our website: www.exelcomposites.net or contact e-mail: profiles@exel.fi
Glass fiber and carbon composites are ideal materials for many application areas because of their superior stiffness, high strength and low weight. Experienced design plus the additional benefits of warm to touch feel of the material and possibility for ergonomic shapes makes Exel composite tubes an unbeatable choice.
Exel has several technologies to produce shaft tubes: Pullwinding, Co-winding and Prepreg wrapping.
Depending on performance requirements we can design the tube structure based on carbon-, glass- or carbon/glass hybrid continuous fibers or fabrics.
|
|
Material : St 52 bk + s, St 52.0
St 52-3N, StE 460 nbk ::Tol. OD DIN 2391; 2448
Tol. WD DIN 2391; 2448
Tol. ID ISO-Tolerance Field H8 - H11
Center Line Average of Interior Surface honed Ra max. 0,5 µm
roller burnished Ra max. 0,4 µm
Dimensional Range: ID ø20 - 500 mm, larger dimensions on request
|
|
SEAMLESS HYDRAULIC LINE TUBES, PHOSPHATED OR GALVANISED FOR PRESSURE AND RETURN PIPING
Material SI 37.4 (E235+N), St 52.4 nbk(E355+N)
Tol. DIN 2391/C or EN 10304-4
Dimensional Range
4,00 x 1.00 mm up to 80,00 x 10,00 mm also in inch-sizes and free Chromium VI
|
|
WELDED CYLINDER TUBES IN STAINLESS STEEL
Material: AISI 304; 316 L; 316 Tl
Tol. OD DIN 2463
Tol. ID ISO-Tolerance Field H9-H11
Cenler Line Average of Interior Surface drawn Ra max. 1,0 µm
Dimensional Range: ID ø8 - 200 mm
|
|
Stainless Steel Pipe
Seamless to EN ISO 1127
Produced in approx. 6 m lengths
sf 800 m
Stainless Steel Pipe
sf 800 m
Capillary Tube
Microtubing
sf 800 z
Imperial
Stainless Steel Pipe
|
|
Tubular products
Sandvik is a world leading producer of seamless stainless steel tubes. We have total control over the entire production process from steel melt to the finished product. Our tubes are typically used within industries such as: chemical and petrochemical, oil and gas, power generation, fertilizer, pulp and paper and mechanical.
|
|
Covered pipes in acciao in teflon
SAT pipes in steel covered in: Teflons vergine, Teflon pfa, Teflon fep are realized inside of clean room with the ns. press to injection, we use only certifyd raw materials like teflon pfa Du Pont.
SAT and certifyd ISO 9001, during is made of injection of the Teflon pfa has a constant control of the qualita' of the product.
All the members are realized with special alloys that do not release impurita'. Therefore the ns. pipings can be used with ultrapure acids and solvents universal also.
We can cover having pipings inner dn 15 to dn 1200, with pure teflon, while with teflon pfa and fep we can cover till max dn 300 in the length till mt 6, Besides pipings we can cover: elbows to 30, 60, 90° also flangiati, tes, special fittings and reductions standard and custom.
|
|
* EUCADRAIN-PE :
Pipes made of HD-PE for area drainage
following DIN 4262-1, type R2
* DRAINFLEX :
Pipes made of PVC for agriculture and house-building
|
|
|
The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety.
|
|
All our products are manufactured to the most exacting
quality standards. We hold a global ISO 9001 registration for
our operations, which follow a uniform quality policy and
apply rigorous quality management systems.
Quality control procedures include statistical process control,
daily process and product audits, and tube traceability systems.
|
|
Welding accessories for piping in stainless steel
ISO Unions with conical seat, or with PTFE flat seat(BSP or NPT)
3000 Lbs forged unions (NPT) with socket welding (SW)
Coupling SW, half coupling SW, female cap SW, elbow SW, tee SW
ISO, Metric, ANSI standards
90°elbow, 45° elbow, tee with sleeve, tee without sleeve
Concentric reducer, excentric reducer, collar, pipe cap
...
|
|
|
FG Inox proposes its stainless steel accessories to weld : bends, tees, reducers, caps and collars in ISO, METRIC and ANSI (schedule) standards.
|
|
Threaded accessories for piping in stainless steel
ISO Unions with conical seat, or with PTFE flat seat(BSP or NPT)
3000 Lbs forged unions (NPT)
Bent unions male/female or female/female (BSP / NPT)
welding nipple, barrel nipple, hexagonal nipple, male plug
female coupling, half coupling, female cap
Bulkhead coupling
Reducer (male/male, male/female, female/female, female/male)
90°elbow, 45° elbow, reduced bend
Threaded tee, reduced tee, cross
...
|
|
316L machined stainless steel unions, threaded, with hose shank or to weld with flat or conical seat.
From ND 5 to ND 100.
MWP at 20C: 64 bars < ND 50 and 40 bars > ND 50
FG Inox proposes 316L stainless steel threaded nipples, barrel or hexagon nipple, adaptors, couplings, elbows, tees, reducers and plugs.
|
|
We are a worldwide market leader for piping systems and components in plastic and complementary materials. The application-oriented system solutions and superior quality components are used for industrial applications, gas and water distribution, and building technology.
PVC-U
PVC-C
ABS
â-PP-H
PP-R
PE 100
PVDF
Pre-Insulated Fittings
Double Containment
Multilayer Fittings
PB
|
|
OLMARK can boast years of experience in designing and manufacturing bended, assembled and flanged rigid pipes (in steel, stainless steel or copper) available in all possible dimensions and shapes required by clients’ technical specifications.
OLMARK’s pipes come, on request, with a CAD-3D drawing and they are all successfully tested in compliance with the most rigid international standardization directives.
With an outside rigid pipe diameter manufacture capacity that can spread from 4 to more than 300 mm, the range of personalised pipes designed by OLMARK is the natural choice of important OEMs, whose success depends on high working pressures control.
|
|
Stainless steel pipe fittings for dairy and food industries
Béné Inox offers you a complete range of unions and pipes fittings
stainless steel 304L and 316L
for SMS, DIN, Tri-clamp, Macon standars
Butterfly valves (manual or automated), pneumatic seat valves
Check valves, filters, sigth glasses...
Unions for welding, unions for expanding, unions for hose fitting
male part, liner, nut, blind nut, with EPDM/FKM/Viton/PTFE gasket...
SMS/BSP adaptor, DIN/BSP adaptor
Bend at 90°, at 45°, at 180°, tee, reduced tee
Concentric reducer, excentric reducer, pipe cap, collar
Threaded stirrup, clamp, pipe holder, pipe
We also have an "industry" range of fittings (ISO,ANSI standards...) :
Valves, unions, flanges, elbows, tees, réducers...
|
|
FG Inox offers 3 standards of stainless steel of food fittings : SMS, DIN, MACON. Among this standards, FG Inox offers threaded fittings, welding fittings, valves and pipes.
All these products are made for alimentary using.
|
|
Pressed segments with small radius for bulk good handling and pressed bends (with good flow characteristics) with a radius twice as large as diameter (up to 400 mm) for exhaust air/dust extraction plants.
Mass production, all products of the same quality, subsequent components identical.
|
|
OK PIPES
The Kongskilde OK Pipe Systems are ideal for pneumatic and mechanical conveying. The simple and flexible pipe systems may be adjusted to suit any specific purpose, resulting in shorter conveying distances and, therefore, the most efficient and economical solutions. The OK Pipe System is available in three different diameters: OK 100, OK 160, OK 200 with diameters of 100, 160 and 200 mm, respectively. The dimensions refer to outside pipe diameters.
The OK Pipe System's modular design comprises pipes, bends, branches, diverters, cyclones, outlets, etc. The components are assembled quickly and easily using the unique OK quick release couplings. The wide range of OK piping and accessories ensures flexibility and ease of installation in existing buildings.
|
|
The range in PVDF comprises a complete series of pipes, fittings for heat socket fusion, manual and automatic valves for use in the construction of process lines and service lines to convey industrial fluids in the operating temperature range from - 40°C to 140°C.
The entire range is produced in SOLEF™ resins by SOLVAY S.A. classified according to ASTM D 3222 and compliant with requirements stated in ISO/WD 10931 for the use of PVDF pipeline systems in industrial processes.
|
|
Non-plasticized polyvinyl chloride (PVC -U) pipes for draining rainwater are without doubt the best compromise between technical characteristics and low cost. Their specific use is extremely indicated thanks to their particularly smooth walls. The complete range, their lightness, their ease of installation and connection by means of sockets and connection fittings also make Faraplan pipes ideal for ventilation.
Production range: Ø 63 - 630 mm
|
|
| ... products without technical information |
| |
|
|
