|
|
RD modules for rounds:
Permanent-electro magnetic modules for rounds handling.
The special shape allows to easily clamp loads with curve surfaces.
CO / CV modules for coils handling:
Permanent-electro magnetic modules for coils handling, even in vertical or horizontal eye.
Special equipments for full-automatic lines.
|
|
LONGITUDINAL ELECTRO LIFTING MAGNETS
These magnets are used to lift bundles of material with an irregular surface, which complicates lifting operations. Longitudinal magnets, however, have a particularly deep penetration field that makes them unsusceptible to such irregularities. This enable safe and effortless transport of bundles of material. Moreover, two or more of these magnets can be used, depending on the length of the bundles. In the event that people are present in the lifting area, however, extra mechanical slings must be fitted for safety purposes.
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
In horizontal or vertical Axis
Several versions : Mechanical, Electromechanical, Electrohydraulic
Alternatives : C-hook… Lifting beams …
Types of loads :
- Rolls Mills,
- Flat products,
- Ingots, Slabs …
- Press Tools.
- Bars or pipes bundles …
- …
|
|
Electropermanent magnets utilize permanent magnetic material surrounded by an electrically powered coil. To energize an electropermanent magnet, a momentary pulse of D. C. power is applied to the magnet's coil in order to charge the permanent magnetic material within. Once energized, the electropermanent magnet does not require a constant source of power to retain the lifted steel coil. To release the steel coil, a reverse pulse of D. C. power is applied to the magnet's coil. The Electropermanent magnet design tends to excel when the steel coil's edge stagger is kept to a minimum.
Special Adaptations (Standard Circular, Rectangular, and Bi-Polar)
Able to prevent "telescoping"
Less storage space required
Transport requires less manpower
|
|
Since 1960, BWG has supplied conveying systems for hot rolled and cold rolled coils for the steel, stainless steel and non-ferrous metal industries. Hot and cold coils up to aluminum qualities for lithographic applications are reliably and carefully fed into and discharged from the production process.
BWG's sophisticated designs together with a high level of automation guarantee for shortest cycle times, high availability and low maintenance costs.
|
|
They are designed for sheets with thicknesses starting from 4mm.
The model TM4, equipped with 4 permanent-electro cross-beams, is able to lift loads up to 12m lenght and weight up to 20 tons.
The TM6 version, equipped with 6 cross-beams, is able to work with loads up to 16m lenght and 25 tons SWL.
The hydraulic system allows high precision and reliability in time.
The same permanent-electro magnetic technology used in the TM model, but installed on a more economical fixed beam.
Capacity up to 10 tons, max load lenght 6m.
Allow to handle sheets from vertical position (stacks) to horizontal (machine bed) and vice versa.
Permanent-electro magnetic modules for profiles handling.
The modules are installed on a fixed beam, in tailor-made configurations with 2/4/8 pieces.
Fixed beams for laser / plasma cutted pieces.
The special shape and layout of the permanent magnets allows to handle the cutted pieces.
|
|
BAT GRIP
3 Ton capacity permanent-electro lifters with battery.
Equipped with a remote control, this lifter is capable to be used for a long period independent of the power supply (est 7
days), because the energy is only used for a fraction of a second during the MAG/DEMAG phase.
|
|
The Eagle Lift® utilizes state of the art technology to make a powerful, lightweight permanent lifting magnet. Our exclusive Test Talon® feature allows an operator to safely test load feasibility and a deep "V" notch between the pole shoes allows greater stability when lifting round stock.
- Permanent Magnet; does NOT require electricity
- Smooth Lever Action between Off & On positions
- Bi-Polar capabilities enable the unit to lift both flat and round stock safely
- Safety factors exceeding industry standards
- Single hand operation
- Very little residual magnetism at OFF makes lifter positioning easier
- Portable, compact and lightweight
- 3 Year Warranty
- Made in the USA
|
|
Features:
Cold Operation
Since the electrical current is only used momentarily, no insulation or coil failures are caused by internal heating.
Safer Holding
The permanent magnetic material is unaffected by external power failure. Since Electro-Permanent magnets require electricity only to activate the magnet "on" or "off", there are no mechanical parts that could accidentally stick. Once the magnet is "on" the electricity can be disconnected indefinitely without any interruption to the holding power.
Cycle Time
Energizing the magnetic material typically takes 2-3 seconds.
Power Consumption
Operating costs are very low compared to conventional electromagnets because the power is applied for a minimal time.
|
|
| ... products without technical information |
| |
For outdoor and indoor applications
Available in Diesel or LPG
Basic capacities from 12000 kg to 25000 kg
|
|
Manipulator of coil
charge up to 300 kg
Stainless or aluminum
Height of lifting until 2230mm
Rechargeable battery with built-in charger.
specific gripping on request.
|
|
| ... products without technical information |
| |
|
The latest addition to the IPoD range, this is a power driving module for up to 6 injectors using magneto-electric technology in multiplex mode. It features several different driving modes and numerous advanced functions enabling it to adapt to most commercially available injectors. This power driver is ideal for motor development in R&D applications or for after-sales service and endurance tests in Quality Control applications.
|
|
EFS 8427 IPOD COIL
PRESENTATION
The EFS 8427 rack is a power
driving module for injection
systems that use magnetoelectric
technology.
It features different driving
modes and advanced functions
making it adaptable to most of
the injectors available on the
market.
ADVANTAGES
• Internal power supply adjustable from 6 to 50 V (compatible with the new automobile
systems powered under 42 V)
• Can operate at high voltages of up to 150 V and can generate up to 30 A peak value
• Independent unit with internal pulse generator
• Features functions compatible with the whole range of 823x Ipods
USE
The injector driving parameters can be modified by means of an RS232 or RS485 (4wire)
link, using the MODBUS protocol:
• MODBUS identification on the front panel
• Daisy chaining of racks by means of the RS485 link
• PC supervision software available on demand.
The injector driving can be started:
• by an external input
• by an internal pulse generator.
The driving modes are derived from a basic cycle defined by the following
phases:
• Boost phase (high voltage capacity discharge) as an option
• Pull-in phase (current chopping on thresholds)
• Holding phase (current chopping on thresholds)
• Discharge phase (Zener voltage).
The system is fully protected against overcurrents, short-circuits and overheating.
DRIVING EXAMPLES
Driving type 8238 Driving type 8237Driving type 8232
|
|
The Control is a PID controller that makes any solenoid valve "intelligent", the choice of solenoid valve depending on the user's application (from among the 601, Posiflow, Preciflow solenoid valves etc), and on the installation, which may be in a critical environment.
The Control can control 2 loops in the same manufacturing process, whether they are open, closed or double (cascaded). For instance:
- In an open loop: the Control adjusts the valve's pressure or flow rate (without a sensor) by measuring the feedback value.
- In a closed loop: the Control continuously compares the set pressure or flow with the set point thanks to a signal emitted by the sensor. The benefits? Very precise control (hysteresis of 1%) that reacts to external interference
- In a double loop (with 2 sensors): the first loop adjusts the valve's pressure or flow for optimum control, while the second loop returns the signal of the relevant feedback value (pressure, position, force etc). Because the process's response time is integrated into the control process as a whole, the latter is more stable.
|
|
General Description
The D3C and D3D Series directional control valves are high-performance, 4-chamber, direct operated, cam controlled, 3 or 4-way valves. They are available in 2- position and conform to NFPA?s D05/CETOP 5 mounting patterns.
Features
Choice of 2 cam roller positions (D3C and D3D)
Short stroke option
High flow, low pressure drop design
|
|
ASCO's solenoid valve controllers (Valve Monitoring Controller) are a line of position indicators for linear and quarter-turn applications. This is a key component for automating your process valve package. The VMS line can easily communicate as a node over a fieldbus network.
ASi Network Card All of ASCO's VMS products are available with Actuator Sensor Interface capability. This 2-wire ASi versions are EMC tested and ASi Certified.
DeviceNet Network Card DeviceNet is available on all VMS products. It is available with or without diagnostics depending upon your needs. ASCO's DeviceNet products are all ODVA Certified.
Profibus PA Network Card All of ASCO's VMS products are available with Profibus PA Network Cards. This high level fieldbus system comes in IS and non-IS versions with diagnostics. ASCO's Profibus PA Network Cards have all been EMC tested and are certified by Profibus International.
|
|
| ... products without technical information |
| |
Compact Coil punching machines PXN easy by Dalcos incorporate the advantages of the coil punching technonolgy in a simple and compact system.
The automatic processing starting from the coil guarantees low hourly costs and high productivity, compared to the traditional punching systems. The raw material is optimized up to 100%.
PXN easy by Dalcos are available for strip-widths from 20 up to 300, 400, 600, and 1000mm and thickness from 0,3 to 2mm, with 5 or 10 moving tools.
The video of the machines are available at http://www.pxneasy.com.
|
|
| ... products without technical information |
| |
Features:
- The system permits printed scales with good repeatability
- Samarium cobalt magnets guarantee stable magnetic values
- Despite of large air gap, high magnetic flux density
- Depending on the internal resistance, an adequade torque is still obtained with a sensity of 250 µA
- The design produces good concentricity of the pole rings to the moving element
|
|
|
E-Z Tec 9000 range metal detectors and separators are used in a variety of industries including plastics, recycling, wood and textiles to detect and divert from product lines all types of metal contaminants, including stainless steel
|
|
CMR CAM 2S
AUTOMATIC VERTICAL STRAPPING MACHINE
This machine carries out automatically the toroidal strapping of skeins and It is designed to be combined with vertical winding machines.
|
|
|
