|
|
|
|
|
|
|
Following the state-of-the-art trend in automation for decentralized systems without cabinets MTM Power has designed the new series PM-IP67A with 50, 75, 100, 150 and 200 W. Remarkable feature of the primary switched modules is that they are suitable for applications with protection degree IP67 for different tasks in indoor and outdoor industrial applications. Without any additional protection against harsh environmental conditions these power supplies can be mounted and used just at the place where needed. The compact power supplies with AC and DC wide input range are designed for worldwide use and are available with single and dual outputs of 5, 12, 15, 24, 36, 48, ±12, ±24, ±36, ±48 and 12/24 VDC. Their dimensions are 166,0 x 85,0 x 35,0 mm and they are connected via 7/8" connectors. The devices are vacuum encapsulated, acc. to Protection Class 2 and comply with the Low Voltage Directives as well as with the up-to-date EMC Standards as regards CE Conformity. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. The series PM-IP67A is short circuit protected, needs no ground load and is operating within a temperature range of -40 to 75 °C.
|
|
|
|
|
|
Aimtec raises the bar for AC-DC power supplies with the release of AMEL5-MAZ series of switching power supplies.
With universal inputs of 90~260VAC, 47~440Hz or 120~370VDC, within a low profile (51.5 x 26.1 x 15.8mm) PCB mountable encapsulated package, the AMEL5-MAZ stands alone in AC-DC converter marketplace with its high I/O isolation of 4000VAC within a wide industrial operating temperature range of -40°C to +80°C. All 8 models in this series operate to specifications at temperatures as low as -40°C, which is essential for ensuring reliable product performance in the extreme weather conditions associated with outdoor applications.
Highly regulated, protected, isolated single and dual output ranges of 3.3 – 24 VDC with ripple and noise as low as 50 mV p-p make, tight line and load regulation of ±0.5% (no minimum load required), make the AMEL5-MAZ series well suited for a wide variety of applications, including industrial control devices, test and measurement equipment, telecommunications applications and consumer electronics products.
No-load power consumption of only 0.3 watt, and efficiency rates up to 75%, these versatile power supplies meet or exceed the requirements for Energy Star EPS v2.0.
With safety approvals cULus and CB and CE marks, the AMEL5-MAZ series meets the exacting safety standards of EN60601-1-2, EN55011 class B, IEC/EN 61000-3-2, -3-2, and IEC 61000-4-2, -4-1, -4-5, -4-6, -4-8, -4-11, for easy integration in a wide range of controlled, non-life support medical and dental devices, instruments, and equipment applications.
.
|
|
|
|
|
|
Aimtec continues to build its AC-DC product offering with the release of AMEx15-MAZ family of switching power supplies.
In a choice of 3 package types (encapsulated: AME15-MAZ, enclosed screw terminal: AMES15-MAZ and enclosed connector package: AMEC15-MAZ with optional DIN rail bracket for both enclosed packages) with universal inputs of 90~260VAC, 47~440Hz or 120~370VDC the AMEx15-MAZ family offers the unique combination of high I/O isolation of 4000VAC within an wide industrial operating temperature range of -40°C to +85°C. The models in each of the 3 series, AME15-MAZ, AMES15-MAZ and AMEC15-MAZ operate within specifications at temperatures as low as -40°C, which is essential for ensuring reliable product performance in the extreme weather conditions associated with outdoor applications.
Highly regulated, protected, isolated single and dual output ranges of 3.3 – 24 VDC with ripple and noise as low as 50 mV p-p make, tight line and load regulation of ±0.5% (no minimum load required), make the AMEx15-MAZ family ideal for a multitude of applications, including industrial control devices, test and measurement equipment, telecommunications applications and consumer electronics products.
The high-grade galvanic isolation between input and output, in conjunction with internal circuit protections allow these power supplies to be configured for reverse polarity on the output; can be wired in series to create higher output voltages. The 4000VAC isolation protects the application from higher surges on the AC line voltage than standard power supply with just 3000VAC
|
|
The TEX-120 series is a range of sealed fieldpower supplies for applications in
harsh outdoor environment. The die-cast aluminium case is water-(incl. salt water), ice, dust and oil resistant to IP67 and NEMA4X requirements.
The construction is shock and vibration proof.The operating temperature range
is specified from -40°C to +85°C without any derating.
There are 2 models available with regulated 12VDC/8A and with 24VDC/5A output. The power supplies feature universal 90 to 264Vac input range and
have safety approvals including CB scheme, IEC/UL 60950-1 and UL 508.
The product is also certified to ATEX94/9/EC for class l, zone ll applications in
hazardous locations.
|
|
GSA TRC-
This extremely compact size power supply is a simple transformer-rectifi er device with protection varistors.The transformer
is provided with winding screen and treated with a special epoxy dye. It takes advantage of the best residual
three phase undulation so maintaining ripple level under 5%. The maximum variation of the output voltage varying the
load from 0 to100% is equal to 2V.
|
|
|
|
|
|
Power Supply Modules
• Range of Fixed or Variable Power Supply Module
• Battery Simulator Module Capable of Sinking or Sourctng Current
• Fixed Supplies Have up to U User Specified Outpi Voltages
• Variable Supplies Can Deliver up to 48V Per Channel With 2A Maximum Current
• VISA and Kernel Support For PXI Environments
• Complies with PXI and CompactPCI Specifications
The 41-720 range of Fixed Power Supply modules provides the user with up to 4 separate voltage outputs isolated from the PXI backplane. Any combination of 3.3V. 5V. 12V or 15V can be specified with a maximum current capability of 4A for the 3.3V option Software provides on/off control and status monitoring for each output.
Programmable Power Supplies provide voltage outputs which are fully adjustable under software control. The 40-735 delivers posilive 10V and the 40-736 delivers negative 10V. both with a maximum current of 1A. The output voltage can either be derived from the PXI chassis supply or from an external source.
The 41-740/741 are dual Programmable Power Supplies and can deliver up to 48V at 2A. They are fed from an external AC mains, or DC 56V supply.
|
|
Linear Modules, Voltage and Current sources, DC power supply
High quality Power Supplies
Safety transformer with split bobbin
Protected against all overload and short circuit conditions
CE
|
|
• 80 Watts
• 1-3 Outputs
• Medical Approvals
• Both Line and Neutral Fused
• Low Leakage Current
• 4000 VAC Isolation
|
|
Power Supply module NT250
- Power supply of modules via backplane
- Supply voltage: 18 .. 34 VDC
- Monitoring of supply voltage
- Power-fail signal for processor module
- Galvanic isolation
- Output power: 45 W
- Buffer time: 10 ms
|
|
With focus on the industrial and traction inverter market the PrimePACK™ IGBT Module is the new trendsetter in the power range up to several megawatts. Also for renewable energies and commercial agriculture vehicles (CAV) the PrimePACK™ module match to highest reliability and lifetime demand. Intelligent chip layout and well-engineered busbar construction offers a smart solution with optimized heat spread and lowest stray inductance. Due to slim shape of the module baseplate a reduced cooling area is needed. Latest mounting technologie of the PrimePACK™ IGBT Module allows automized assembly steps which reduce the system costs significant.
Our contribution to your success at the glance:
* Improved thermal properties
* Low stray inductance
* Wide range of operating temperatures
* Integrated NTC with high isolation
* 600A/1200V-modules with SiC-Diodes and fast-switching IGBT2 available
|
|
SPH1013 and SPH500 power supplies with 72V
Our new, robust and highly-efficient DC-Power Super Slim power supplies improve the performance of your drive applications. Use the parallel switching facility offered by these modules to boost output.
SPH1013-4821 + SPH1013-7214
* Input: 3 x 340 - 550VAC
* 1000 watts - Output: 48V + 72V
* Power Boost up to 200 %
* Parallel switchable with back feeding voltage
* wall or DIN-rail mountable
* 24V model also available
|
|
AC-DC ISOLATED POWER SUPPLIES FOR ALL YOUR HI-GRADE INDUSTRIAL COTS APPLICATIONS.
NEW AC-1, POWER FACTOR CORRECTION WITH UNIVERSAL INPUT VOLTAGE / ISOLATED DC OUTPUTS, FIXED FREQUENCY TO 300 WATTS WITH OUTPUTS FROM 5 TO 48 VDC.
SW SERIES - LOW POWER ISOLATED AC-DC switchers in miniature packaging from 1.83" x 2.23" x 0.5", 3 to 15 watts.
UWC / UWD SERIES - UNIVERSAL INPUT, 85 - 265 VAC input, from 47 to 440 Hz. Isolated outputs from 3.3 to 48 VDC, up to 50 watts.
AC SERIES - 5 TO 55 WATTS fully shielded switchers with isolated DC outputs. Ruggedized for critical applications.
LAC SERIES - Low Noise Linear Supplies, single, dual, and triple outputs, thru hole or terminal strip models.
OFU SERIES - Open frame units with universal AC inputs.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
|
|
see the results for the following category : 
