|
|
The continuously growing number of electric and electronic applications in vehicles demands constant and maintenance-free supply.
MTM Power has developed a new generation of DC/DC converters with 80 and 150 Watt output power; these converters are especially designed for applications in vehicle and rail technology but also for use in industrial and telecommunication applications. This new model range allows input voltages of 9/14.4...154 VDC, in various voltage ranges, thereby covering all common battery sets. Typical input voltage ranges are, among others, according to EN 50 155, 14.4...33.6 VDC (24 VDC nominal), 21.6...72 VDC (36/48 VDC nominal) and 43.2...154 VDC (72/110 VDC nominal). Input voltage ranges deviating from these can be realised specifically for the customer at any time.
|
|
|
|
|
|
|
The product family PMG/PCMG with DC input voltage completes the range of primary switched MTM Power Modules. The modules offer an input range of 20...72 VDC and allow - due to the different types available in this series - efficient solutions in numerous application fields. They are available with single, dual or triple outputs. The single and dual (sym.) versions are UL 60 950 and UL 508 approved. Dimensions are 90,5 x 65,5 x 33,5 mm for PCB-mounting (PMG) and 120,0 x 65,5 x 33,0 mm for chassis mounting (PCMG). Thus, they offer the same dimensions and pinning as the standard AC/DC and low voltage modules of the same wattage range which allows the customer to design only one layout for standard AC, low voltage and DC input. The vacuum encapsulated devices offer an isolation of 3,3 kVrms and comply to the up-to-date EN standards as regards CE conformity. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. The series PMG/PCMG offers 15 W or 30 W constant output wattage, is short circuit protected and needs no ground load.
|
|
|
|
|
|
Aimtec strengths its low output power product offering with the addition of its AM1G-Z and AM2G-Z series of single and dual output DC-DC switching power supplies with operating temperature range -40.+85ºC. With output currents of up to 303mA delivered to regulated output voltage range of 3.3 to 24V, at high efficiency rates of up to 78%, the AM1G-Z and AM2G-Z series is ideally suited for portable power management applications, in addition to other telecom, industrial, datacom and transportation equipment applications.
Versatile, single and dual output modules are available in 2:1 input ranges of 4.5-9V, 9-18V, 18-36V and 36-72V with I/O isolation of 1000 and 3000VDC within a compact SIP8 package. The AM1G-Z and AM2G-Z series feature many functional advantages, including continuous short circuit protection and remote on/off control. Designed to allow the output voltage to shut-off without shutting down the input voltage, the remote ON/OFF function in Aimtec's AM1G-Z and AM2G-Z series is supports applications where conservation of the device's power consumption is required and/or there is a need for the power supplies to switch ON and OFF in a specific sequence. Made with high quality, RoHS compliant materials that undergo rigorous quality control to ensure reliability and performance, samples are available from stock and can be ordered immediately.
|
|
|
|
|
|
Aimtec strengths its low output power product offering with the addition of its AM1G-Z and AM2G-Z series of single and dual output DC-DC switching power supplies with operating temperature range -40.+85ºC. With output currents of up to 303mA delivered to regulated output voltage range of 3.3 to 24V, at high efficiency rates of up to 78%, the AM1G-Z and AM2G-Z series is ideally suited for portable power management applications, in addition to other telecom, industrial, datacom and transportation equipment applications.
Versatile, single and dual output modules are available in 2:1 input ranges of 4.5-9V, 9-18V, 18-36V and 36-72V with I/O isolation of 1000 and 3000VDC within a compact SIP8 package. The AM1G-Z and AM2G-Z series feature many functional advantages, including continuous short circuit protection and remote on/off control. Designed to allow the output voltage to shut-off without shutting down the input voltage, the remote ON/OFF function in Aimtec's AM1G-Z and AM2G-Z series is supports applications where conservation of the device's power consumption is required and/or there is a need for the power supplies to switch ON and OFF in a specific sequence. Made with high quality, RoHS compliant materials that undergo rigorous quality control to ensure reliability and performance, samples are available from stock and can be ordered immediately.
|
|
SMD-Package 1 to 15W
Our range of isolated DC/DC converters in SMD package offers products from 1 to 15W with unregulated or regulated output voltages. All models provide high pin accuracy and are qualified for automated ick-and-place machines.
They can withstand the high temperatures in lead-free reflow solder processes and comply with IPC J-STD-020C standard. All products can also be supplied in tape and reel package.
High Performance 3 to 150W
We offer an extensive range of high performance DC/DC converters with output power ranges from 3 to 150W, offering excellent specifications and very high power density in shielded metal packages. Models with wide 2:1 or ultra-wide 4:1 input ranges are available. All product series models offer an extended operating temperature range of -40 to +85°C and are available with optional
heatsink.
|
|
Compact DC/DC converters for DIN rail and wall mounting
At 100 Watt and 500 Watt the latest DC/DC converters from Zentro Elektrik extend the existing comprehensive range of converters.
The compact DC/DC converters are designed for applications in automation engineering, power supply and power station engineering, in traffic systems and railway in particular, and in mechanical engineering. They are air-cooled and have many control, operating and display elements.
Connections are made by means of easy-to-use screw terminals.
The converters are distinguished by a high degree of efficiency of > 80% and comprehensive protective and control facilities such as protection from overload and overvoltage, thermal protection and decoupling diodes. Options such as a varistor at the output, to prove additional overvoltage protection or a signal relay, further distinguish the
GWH 100 / 500 series of converters. Up to 3 units with active current sharing can be switched in parallel to extend power.
|
|
Features :
1000VDC I/O isolation
Internal SMD technology
Input filter : Capacitor type
Non-conductive plastic case
Dual in line package
SIP package is available
100% burn-in tets
Low cost/High reliability
1 year warranty
|
|
* Input / output isolation
* Input polarity reverse protection
* Input protection: fuse 12A/250V
* Input under voltage protection 74V
* Short circuit protection: shut down & auto recovery
* Over load protection: shut down & auto recovery
* Over voltage protection
* 100% 50°C burn-in test.
|
|
The AIC1845 is a micropower charge pump DC/DC converter that produces a regulated 5V output. The input voltage range is 2.7V to 5.0V. Extremely low operating current (13uA typical with no load) and a low external-part count (one 0.22uF flying capacitor and two small bypass capacitors at VIN and VOUT ) make the AIC1845 ideally suitable for small, battery-powered ap-plications.
The AIC1845 operates as a PSM (Pulse Skip-ping Modulation) mode switched capacitor volt-age doubler to produce a regulated output and features with thermal shutdown capability and short circuit protection.
The AIC1845 is available in a 6-pin SOT-23 package.
|
|
• 2-3 Watts
• Compact 1.0 x 0.8 Inch Metal Package
• Industry Standard Pinout
• 2:1 Input Range
• Single & Dual Outputs
• Operating Temperature -40°C to +100 °C
|
|
DC/DC Converters
Delta offers high power density DC-DC converters up to 700W. Using high switching frequency, hybrid circuit, chip-on-board and surface mounting technologies, these DC-DC converters provide high power density, a low profile and high efficiency. Accurate current sharing and fixed frequency synchronization of DC-DC converters allows reliable parallel operation for easy expansion. The product line covers commercial, industrial and military grade applications. Delta also offers high efficiency Voltage Regulator Modules (VRMs) for low voltage microprocessors.
|
|
AIF - PFC Series
AIF Power Factor Correction Module, 1600 Watts ouput power, Universal AC Input of 85-264VAC 50/60 Hz, Output 380V DC
|
|
Wherever electricity flows and signals are processed, interface products from Wieland Electric prove their extraordinary strength. The wide range of relays, the components for power supply and overvoltage protection as well as the passive interfaces and analog modules will make your application a real all-rounder, too. Use our interface technology to set your signals!
Power supply
Power supply units are the heart of a control cabinet; its components demand different performance levels depending on the requirements. Therefore, our product range includes single-phase and three-phase devices for DIN rail mounting in the performance classes from 1.25 A to 40 A DC for almost all possible applications.
|
|
The Miniature Power DC/DC Converters operate over wide input voltage ranges while maintaining tight output regulation and low ripple.
Safety Features: Overtemperature, Input Under/Overvoltage, Output Overcurrent and Short Circuit Protection.
Miniature High Power/High Voltage DC-DC Converters:
Up to 500 Vdc Isolated Outputs
|
|
The Miniature Power DC/DC Converters operate over wide input voltage ranges while maintaining tight output regulation and low ripple.
Safety Features: Overtemperature, Input Under/Overvoltage, Output Overcurrent and Short Circuit Protection.
Up to 10,000 VCD Output
Up to 300 Watts
New dual outputs
NEW Regulated outputs
|
|
|
This series of DC-DC converters are produced in an ultra-miniature encapsulated package.
|
|
Switchmode DC-DC Regulators
High-efficiency switchmode solutions provide longer battery life, less heat, and smaller size.
Power-Supply Cookbook
Choose the power-supply specifications that most closely meet your needs. View a circuit design, complete with a schematic diagram and bill of materials.
XScale PMIC Technology
Third-Generation PMICs for Monahans Extend Maxim Leadership
|
|
|
|
|
|
The AIC1579 is a high-power, high-efficiency voltage-mode DC/DC controller for motherboard VI/O power supply applications. Designed to drive an N-channel MOSFET in a standard buck topology, the AIC1579 features a high voltage CMOS output driver, short-circuit protection, and 8-pin package.
An external 4-bit Digital-to-Analog Converter (DAC) can be used along with the AIC1579 to adjust the output voltage from 2.0V to 3.5V in 0.1V increments. Table 1 on the following page specifies the corresponding output voltage for 16 combinations of DAC inputs as in the typical application circuit.
The 200KHz switching frequency allows for using small external components while maintaining high conversion efficiency. The 11MHz bandwidth and 6V/uS slew rate of the error amplifier ensures high converter bandwidth and fast transient response.
The AIC1579 provides adjustable overcurrent and short-circuit protections by sensing the output current across the on resistance of the external N-channel MOSFET rather than an external low value sense resistor.
The AIC1579L provides lower reference voltage (1.30V) than the default (2.00V, AIC1579) for lower VOUT requirement.
|
|
The AIC1638 is a high efficiency step-up DC/DC converter for applications using 1 to 4 NiMH battery cells. Only three external components are required to deliver a fixed output voltage of 2.7V, 3.0V, 3.3V, 4.5V or 5V. The AIC1638 starts up from less than 0.9V input with 1mA load. Pulse Frequency Modulation scheme brings optimized performance for applications with light output loading and low input voltages. The output ripple and noise are lower compared with the circuits operating in PSM mode.
The PFM control circuit operating in 100KHz (max.) switching rate results in smaller passive components. The space saving SOT-23, SOT-89 and TO-92 packages make the AIC1638 an ideal choice of DC/DC converter for space conscious applications, like pagers, electronic cameras, and wireless microphones.
|
|
austriamicrosystems provides high performance DC-DC converters with outstanding efficiencies and high output current.
AS1320: 200mA step-up DC-DC converter with a fixed output voltage of 3.3V - SOT23-6
AS1321: 130mA step-up DC-DC converter with a fixed output voltage of 5.0V - SOT23-6
AS1322: Low Voltage, 1.2 MHz, Micropower, DC-DC Step-Up Converter - TSOT23-6
AS1323: 1.6µA Ultra-Low Quiescent Current, Single Cell, Step-Up Converter - TSOT23-5
AS1325: 300/185mA step-up DC-DC converter with a fixed output voltage of 3.3V/5.0V - SOT23-6
AS1326: High-Current, Low-Voltage, DC-DC Step-Up Converter - TDFN-10
AS1329: Low Voltage, 1.2 MHz, Micropower, DC-DC Step-Up Converter, shutdown battery feedthrough - TSOT23-6
|
|
| ... products without technical information |
| |
|
|
