|
|
|
|
|
|
JetNet 4706, an improved and strengthen manageable industrial PoE switch, it is designed for industrial PoE applications such as IP surveillance or wireless access points. It supports intelligent PoE control and schedule management; each of the four PoE ports can be configured in a weekly schedule by hourly basis and PoE on/off can be remote controlled via SNMP and Web. JetNet 4706 is compliant to both IEEE 802.3af PoE as well as the pioneer standard of IEEE802.3at PoE Plus design for boosting PoE delivery up to 30W in each of the four PoE ports. JetNet 4706 can auto-detect 24V & 48V power input and deliver 24V & 48V PoE output allows more applications where 48VDC is not an option.
*Four 10/100 TX Power over Ethernet ports and two redundant
10/100 TX uplink ports
*DC 24V Power Input for DC 22V output through Ethernet
(Non-standard PoE)
*DC 48V Power Input for IEEE 802.3af 48V PoE output (IEEE 802.3af)
*Up to 30W per port for High Power solution by Power Input DC 55V
(IEEE 802.3at)
*UP to 100W for total power budget
*Support IEEE 802.3af for PoE detection and PoE classification resistors
*PoE control and schedule by hour/weekly basis
*Auto-detect Powered Device status for device auto-reset (LPLD)
*Patented Rapid Super Ring technology (RSR), back up system recovery time less than 5ms
*SNMP v1/v2c/v3, IGMP snooping v1/v2/v3, RMON, LACP, VLAN, QoS
*Network security by IP/MAC address, SSL and SSH
*Built-in hardware watchdog timer for system auto-reset
*Aluminum rugged enclosure with IP-31 grade protection
*Forced mode Powering
*Wide operation temperature: -25~60oC
Also we have Industrial 6-port Web-Managed PoE Plus Switch JetNet 3706
|
|
LPES-2224C
24 Port 10/100 PoE SNMP power management switch
+ 2 Giga combo with 200W AC power + 1 DC redundant input
LPES-2208C
8 Port 10/100 PoE switch ( 8 PoE injectors)
POE-UPWM
400W UPS DC power unit with AC/DC output
POE-2400M Midspan Hub
24 Port 10/100 PoE SNMP Midspan Hub with 200W AC power
+ optional RPS - Powerdesign chipset
POA-100
802.3af standard PoE One Port Injector
autodetect for non-802.af - devices
POS-100S
PoE power data-splitter with 1 cable 4 dipswitch to adjust voltage (5/7.5/9/12V)
|
|
|
|
|
|
|
IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility X Open-Vision. The wide operating temperature range from -40 to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
|
|
DragonLine 4x10/100TX + 1FX Industrial Ethernet Switch (PoE)
Technical data
RJ-45 port support Auto MDI/MDI-X Function
Power over Ethernet
Store-and-Forward Switching Architecture
Back-plane (Switching Fabric): 1 Gbps
1K MAC Address Table
IP-30 Protection
DIN Rail and Wall Mount Design
DC 48V Redundant Power
Power Polarity Reverse Protect
Overload Current Re-settable Fuse Present
Provides EFT protection 3000 VDC for power line
Supports 4000 VDC Ethernet ESD protection
|
|
|
|
|
|
|
The Cobra series CME-822E is a highly reliable and fault-tolerant Industrial 10-port Managed Power over Ethernet Switch. It supports eight PoE injector ports classified as power source equipment (PSE). CME-822E offers state of the art design with eight 10/100 Mbps Ethernet ports and two small form pluggable (SFP) ports that supports Gigabit SX or LC depending on your existing network structure. The innovative SFP fiber slot design provides user the flexibility to insert different fiber modules, either multi-mode or single-mode at various distances, whether you require typical 10km or overhaul 40 km, 80 km and 120 km distances. With its high performance switching device, CME-822E provides redundant self-recovery mechanism in less than 10ms on full load which allows you to establish a redundant Ethernet network to build a back-up ring topology. Dual homing and Ring coupling are supported to add reliability by allowing a device to be connected to be network by way of two independent connection points. CME-822E offers powerful network management functions including SNMP, SMTP, SNTP, Quality of Service, Class of Service, IGMP, Snooping, LACP, DHCP, VLAN, RMON, Port Trunk, Port Mirror, User Authentication (Radius) and IP Security. The CME-822E is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Its IP-30 housing protection, wide operating temperature of -40 to 80 and DIN-Rail mounting is suitable for an industrial environment. The CME-822E is a plug-and-play solution for your Power over Ethernet applications.
|
|
JetNet 3705-24V is an Industrial 5-port PoE switch, designed to fulfill the specific needs of transportation system networks. JetNet 3705-24V integrates Korenix patented 24V vehicle PoE technology – the 24V to 48V power booster for making the deployment of standard PoE IP cameras feasible on buses, railcars, ships, harbors, etc.
Combined with rugged fan-less design, including vibration resistance and -40~60℃ wide operating temperature, JetNet 3705-24V overcomes the harsh conditions and ensures network reliability on all types of public moving vehicles.
Key features of JetNet 3705-24V are:
* 5 Ports 10/100 TX Industrial Switch with 4 PoE Injectors
* Korenix Patented Built-in DC 24 to 48V Booster for rail, bus, transit transportation
* Embedded 4-port IEEE 802.3af PoE, delivering 15.4W per port
* -40~60℃ wide operating temperature for hazardous environment
* Redundant 24/48 VDC power inputs with overload current protection
|
|
|
|
|
|
Highlights
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Support AP/Bridge/Repeater/AP-Client Mode
IP67 standard compliant
Fully Compliant with IEEE802.3af POE specification
Secured Management by HTTPs and SSH
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
LLDP supported for topology view through Open-Vision
Support 802.1x security and radius
Features
WLAN interface supports up to 54Mbps link speed
Various kinds of operation modes supported: AP/Bridge/Repeater/AP-Client mode
Various kinds of encryption supported: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/ WPA2-PSK(TKIP,AES)/802.1X Authentication
Environmentally sealed by IP67 grade protection and ultrarugged enclosure fir toughest industrial usages
Wireless connecting status monitoring
Versatile modes & event alarm by e-mail
HTTPs & SSH protocol supported for secured management
IP table to prevent access from unauthorized IP address
IP Configurable by Windows utility (AP-Tool)
|
|
|
|
|
|
Featuring 1000Mbps speeds, Power over Ethernet and wide temperature
Features
Gigabit Speeds (400 and 600 series)
PoE (EIRP series)
Rugged IP30 DIN/Panel Mount Metal Case
Dual Power Inputs with Alarm Output
Wide Temperature Rating on - T models
Gigabit
B&B Electronics' line of unmanaged (EIR400 series) and managed (EIR600 series) Ethernet switches address applications requiring Gigabit (1000Base) Ethernet. All of these switches are DIN or panel mountable and accommodate two power inputs along with an Alarm Relay Output. The - T models are wide temperature rated at -40 to 75ºC. For added flexibility and future expansion options, many models support a dual function port, where the copper Ethernet and SFP ports are shared. The wide range power input on these models makes each switch suitable for a variety of applications.
PoE (IEEE 802.3af)-EIRP models only
Power is transmitted over the Ethernet cable along with the data lines. Each PoE switch has a set of ports that is classified as power source equipment (PSE). These ports can be used to power IEEE 802.3af compliant powered devices (PD), eliminating the need for a separate power line to be run to each end device. A whole new set of applications become feasible with PoE switches due to reduced installation costs through ease of setup and the ability to remotely power end devices. The PoE ports on these switches follow Alternative A standards and are limited to 15.4 Watts of power output per port. These switches require a 48VDC power supply.
|
|
|
|
|
|
The RuggedSwitch® RSG2100P is an industrially hardened, Power Over Ethernet (PoE) enabled, fully managed, modular, Ethernet switch specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2100P's superior ruggedized hardware design coupled with the RuggedSwitch™ Operating System (ROS) provides improved system reliability and advanced networking features making it ideally suited for creating Ethernet networks for
mission-critical, real-time, control applications.
The RSG2100P comes standard with 4 10/100BaseTX 802.3af (PoE) compliant Ethernet ports and offers modular flexibility of up to
15 additional Ethernet ports including 10BaseFL /100BaseFX/ 1000BaseX fiber and 10/100/ 1000BaseTX copper port combinations. The RSG2100P is highly versatile and can support multiple fiber types and connectors (ST, MTRJ, LC, SC) without loss of port density.
The RSG2100P is an ideal solution to power and connect several Ethernet devices (such as IP phones, video cameras, and wireless access points) where AC power is not available or cost-prohibitive to provide locally.
|
|
|
|
|
|
Introduction
Moxa's EDS-P510 is a 10-port industrial Gigabit managed Ethernet switch with PoE capability that can power PoE devices over Ethernet in any difficult-to-reach outdoor and harsh locations. The EDS-P510 has four PoE ports to deliver 48 VDC at up to 15.4 watts and 10/100 Mb data transmission per port. Up to three Gigabit SFP/TP combo ports can be used to form a redundant Gigabit ring backbone with ultra fast failover using Turbo Ring technology and Gigabit uplink to the core switches or control centers.
The EDS-P510 supports automatic detection and protection when 802.3af-compliant devices are not attached, fast fault recovery for powered devices, and a power limit control mechanism to save unnecessary power consumption. Furthermore, an hourly/weekly scheduling mechanism is equipped to fulfill economic power consumption and application-specific needs.
Features
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• 4 10/100Mb PoE ports to power IEEE 802.3af compliant devices
• Up to 15.4 watts at 48 VDC per PoE port
• 3 SFP/TP Gigabit combo ports
• Turbo Ring (recovery < 20 ms) for Ethernet redundancy
• QoS, IGMP snooping and GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH supported
• IEEE 1588 PTP for precise time synchronization of networks (Q3 available soon)
• Modbus/TCP industrial Ethernet protocol supported (Q3 available soon)
• -40 to 75°C operating temperature range (T models)
|
|
Compact, managed and unmanaged 8 port RS22 PoE switches for maximum reliability of complex automation solutions.
The PoE switches of the RS family using the phantom power (wire pairs: 1/2 – 3/6)
|
|
|
|
|
|
The JetNet 4506-RJ 10/100 Base-TX IP67 Ethernet switch, is specifically designed for the toughest industrial environments. In combination with its IP67 design and the superb management functionality, the JetNet 4506-RJ extends your managing boundaries where no other industrial Ethernet switch can go!
JetNet 4506-RJ is constructed of a rugged weather tight aluminum case and designed with six IP67 rated RJ45 Ethernet ports, which provide a waterproof, and dust-tight connection.
For maximum performance, each switch includes the next generation of redundancy protocol, Rapid Super Ring. This feature allows for the configuration of any two ports for extra protection against link failure and
data loss due to constant vibration and heavy shock. The JetNet 4506-RJ also includes other management features, such as port-based VLAN, QoS, IGMP snooping, SNMP and DHCP, for traffic isolation, deterministic transmission and network management.
The JetNet 4506-RJ can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor, offshore, railway, moving vehicles, coal mines, petrochemical factories, food/beverage industries and plant floors.
Also we have IP68 Ethernet switch pls go to http://www.korenix.com/JetRock_Series_IP67_M12-Ethernet-switch-selection-guide.htm
|
|
|
|
|
|
The JetNet 3706-RJ, an IP67 industrial PoE switch, is specifically designed for the toughest industrial environments. JetNet 3706-RJ is constructed of a rugged weather tight aluminum case and six IP67 rated RJ45 ports to provide a waterproof and dust-tight connection and ensure highly reliable data transmission despite vibration and shock in heavy industrial applications.
Equipped with 4 PoE ports, JetNet3706-RJ extends power deployments to the most inaccessible areas while reducing construction, maintenance time and overall costs.
Due to its outstanding mechanical design and capability of operating in -40-70oC wide temperature range, JetNet 3706-RJ can be easily adopted in all kinds of outdoor applications providing the most rugged solutions for data transmission and power delivering in transportation systems, oil and mining sectors, factories, offshore, etc.
Product Features:
# IP67 waterproof, dust-tight for outdoor industrial applications
# Rugged, corrosion-resistant aluminum enclosure
# Six 10/100 TX auto-negotiation ports with IP67 grade robust RJ45 connectors
# Four IEEE802.3af PoE ports deliver 15.4W power per RJ45 port
# Easy-installed, rugged RJ45 connectors against vibration and shock
# -40~70oC wide operating temperature
|
|
The T101 Time Server / GPS Clock will distribute UTC Time directly in your environment, with a high accuracy (the NTP / SNTP Ethernet frames absolute accuracy is 200 to 600 nanoseconds).
The T101 has TOP/pps programmables outputs, with fast relay @2500V isolation, with an automatic compensation of you system propragation delay.
It features also external events and alarms recorder, with 40 nano-seconds accuracy, and 2500V isolation.
The T101 is compliant to industrial standard IEC 61850.
Power over Ethernet and indoor sensitivity GPS chip are integrated in the T101, hence reducing installation costs.
The T101 is available in several form factors : 19'' Rack, DIN rail, compact or OEM.
The NT101 version (with TSIP), allows to use this server in embedded applications (railways for example).
Also, this NTP server can be connected to the popular TRIMBLE AcuTime GPS receiver (including TSIP protocol) -> see T104.
|
|
| ... products without technical information |
| |
Phihong is leading the development of PoE technology with a fully compliant line of midspans, splitters, DIMMs, PoE power supplies and redundant power sources.
As an innovative alternative to problems involving the placement and installation of power outlets, PoE enables both power and data to be carried over an Ethernet cable.
Phihong has addressed the issues of cost, reliability and accessibility. Phihong - making it easier and more affordable to switch to PoE.
|
|
1U High, 48VDC at 1200 Watts with PFC and Hot-Swap
- 1500VAC Output Isolation
- Meets IEEE 802.3af
- Includes Isolated 5V, ¼A Standby Output
- Hot-Swap or Chassis Mount
- 48VDC Output at 25A
- I²C Serial Data Bus Option
- Integral LED Status Indicators
- Up to 15 Watts/Cubic Inch
- Power Factor Corrected
- Low Profile: 1.6 Inches (41mm) High
- Single Hot-Swappable Connector
- Staged Pin Lengths
- ORing Diodes on Output
- 1U, 19" Racks Hold 3 Units*
- Active Current Sharing
- Universal 85 to 264VAC Input
- Class B EMI Input Filter
- Optimized Thermal Management
- No Minimum Load
- Control & Monitoring Features
- PoE - Power Over Ethernet
|
|
ETHERNET Computer Interface
* Interface between Ethernet IP Network and Power Supply
* IP-address can be configured by user,
make use of existing networks
* 16-bit accuracy for voltage and current programming or output monitoring
* Read-back of status signals, change power supply modes like: Remote/Local
* Digital user in- and outputs (isolated)
* Software Calibration
* SCPI commands
* Internal Card available for ES150, ES300, SM800, SM1500, SM3000, SM6000
Note: internal interface cards are factory fitted and calibrated, see datasheet for ordering details.
* External module for other power supplies
* Download PDF-datasheet
* Download Software
|
|
|
|
|
|
4-channel H.264 Audio/Video capture card, supports Power over Ethernet
Features
* H.264 AVC Main Profile CODEC
* LPCM and MPEG-2 Advanced Audio Coding
* Supports NTSC and PAL signal inputs
* Pre/post alarm buffer for event recording
* Instant search with preview windows
* Optional Power Over Ethernet (PoE IEEE802.3af)
Supports TCP/IP, UDP, HTTP, PPPoE, RTP, RTSP, FTP, NTP, POE protocols
10/100BaseT fast Ethernet WAN port x1(RJ-45)
Video Connections
Input: 4 x BNC connector, CVBS 1.0Vp-p
Output: 1 x BNC connector, CVBS 1.0Vp-p
H.264 Video
H.264/AVC codec
Up to 4 analog video inputs
Motion detection, percentage and sensitivity
CIF up to Full D1 resolution at 30/25 FPS for NTSC/PAL
720x480 NTSC, 720x576 PAL
NTSC: 30FPS / PAL : 25FPS
Audio
Unbalanced, RCA connector audio in
Unbalanced, RCA connector audio out
LPCM and MPEG-2 Advanced Audio Coding (AAC)
LED Indicator
Power x1
Network status x1
Security
Administrator and user group
Password authentication
Alarm Feature
2 TTL, terminal block
2 Relay output
RS-485 Half duplex, terminal block
PTZ
Supports PTZ protocols: Pelco-P_type1, Pelco-
P_type2, Pelco-D
Load Default
1 button for factory default parameter setting
Power
4.5W
DC12V in
POE supported
Client Software
Microsoft Windows 2000/XP
Networking, Video, audio and data rate, Display window scale, Motion detection setting
Real time clock setting, File saving, Remote configuration and control, Snapshot
Pre/post alarm buffer for event recording, Instant search with preview windows, Fast/slow forward replay and pause, Hard disk quota warning, File format: MPEG4 (MPG4)
http://www.lannerinc.com
|
|
System comprises an isolation transformer and a common mode choke DETAILS
Meets all current requirements of Gigabit Ethernet PoE Plus
Isolation Transformer OCL ³ 350 µH with a 35 mA dc offset up to 70°C.
Can handle current up to 800 mA
Can be used with virtually all chipsets
RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations
|
|
| ... products without technical information |
| |
|
|
|
|
DragonLine 24 port Gigabit Switch (PoE/Managed/2 SFP)
Features:
- 24 10/100 plus 2 MINI GBIC /RJ-45 combo switch with 24 PoE injector and build in 200W AC power
- Confirms to IEEE802.3 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber, 802.3af Power over Ethernet
- High back-plane bandwidth 8.8Gbps
- Rapid spanning tree IEEE802.1w
- IGMP snooping and IGMP Query mode for Multi-media application
- Port mirror and bandwidth control
- Supports GVRP function
- End point insert mode remote power feeding
- Provides extra DC 48V input with redundant function and management power status through RS-232 port
- Management by Web/SNMP/Telnet/Console
- System event log support
- Port Based VLAN /802 .1Q Tag VLAN
- IEEE802.3x Flow control
- Flow control for full duplex
- Back pressure for half duplex
- IEEE802.3ad Port trunk with LACP
- Spanning tree protocol IEEE 802.1d
- IEEE 802.1p class of service
- IEEE 802.1x user authentication
- TACACS+ (option)
- Broadcast storm filter
- DHCP client
- On line extra power supply testing through RS-232 port
- Support command line interface management
- Support SNTP
|
|
Standard Switch
DragonLine is an independent portfolio that rounds off our product range as a provider of system solutions. The portfolio consists of managed and unmanaged switches for Fast-Ethernet and Gigabit-Ethernet in industrial areas or for SOHO - applications, optionally with PoE (Power over Ethernet). The systems are available for wall fastening, DIN rail mounting or rack mounting. Moreover, Device and COM server for RS232, RS422 and RS485 interfaces are available.
- Ethernet Switches
- Industrial Ethernet Switches
- Industrial Device-Server
|
|
|
|
|
|
DragonLine 24 port Gigabit Switch (PoE/Managed/2 SFP)
Features:
- 24 10/100 plus 2 MINI GBIC /RJ-45 combo switch with 24 PoE injector and build in 200W AC power
- Confirms to IEEE802.3 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber, 802.3af Power over Ethernet
- High back-plane bandwidth 8.8Gbps
- Rapid spanning tree IEEE802.1w
- IGMP snooping and IGMP Query mode for Multi-media application
- Port mirror and bandwidth control
- Supports GVRP function
- End point insert mode remote power feeding
- Provides extra DC 48V input with redundant function and management power status through RS-232 port
- Management by Web/SNMP/Telnet/Console
- System event log support
- Port Based VLAN /802 .1Q Tag VLAN
- IEEE802.3x Flow control
- Flow control for full duplex
- Back pressure for half duplex
- IEEE802.3ad Port trunk with LACP
- Spanning tree protocol IEEE 802.1d
- IEEE 802.1p class of service
- IEEE 802.1x user authentication
- TACACS+ (option)
- Broadcast storm filter
- DHCP client
- On line extra power supply testing through RS-232 port
- Support command line interface management
- Support SNTP
|
|
Standard Switch
DragonLine is an independent portfolio that rounds off our product range as a provider of system solutions. The portfolio consists of managed and unmanaged switches for Fast-Ethernet and Gigabit-Ethernet in industrial areas or for SOHO - applications, optionally with PoE (Power over Ethernet). The systems are available for wall fastening, DIN rail mounting or rack mounting. Moreover, Device and COM server for RS232, RS422 and RS485 interfaces are available.
- Ethernet Switches
- Industrial Ethernet Switches
- Industrial Device-Server
|
|
World’s First Industrial 9-port Intelligent PoE Routing computer
* Intel IXP430/435 667MHz networking processor
* Complete Layer3 routing support: OSPF, RIP, DVMRP, IPv6
* 8-port PoE delivers full 15.4W per port, 123w per unit
* Full management features with QoS, VLAN, PoE scheduling
* Separated two DC 12~48V power inputs (48V for PoE)
* Versatile interfaces of USB, DIO, SDIO control, and optional modules for RFID, WLAN, and WiMax
* Embedded Linux UI—Modulized Webmin, capable of running
customized control programs
* Cross-platform applications by JavaVM
* Fan-less and Ruggedized Industrial Design for anti-vibration,
anti-shock, and -25~70oC operation temperature
(-40~80oC for Wide temperature)
|
|
|
|
