|
|
Our field power plants range from 1 to 300 MW. Proven reliability, fuel flexibility and low emissions make the plants suitable for demanding applications in the oil and gas industry, such as processing facilities, pump stations, compressor stations, marine terminals etc.
Modular design
The modular design of our field power plants enables trouble-free installation and fast-track delivery anywhere in the world. Prefabricated, functionally pretested modules guarantee consistent quality and performance. Site installation is simply a matter of assembling and connecting the modules.
Smaller initial investment
As your needs change you can change the plant size by adding additional generating sets. This means you can get started with a smaller initial investment.
Multifuel capability
Our power plants can be run on either associated gas or crude oil, residual or diesel oil. This enables the operator to choose the fuel with the lowest price and best availability. The system is also tolerant against fuel quality variations and as such suitable for oil field power generation.
|
|
Our oil power plants range from 1 to 300 MW. High efficiency, low emissions and proven long-term reliability make these plants suitable for stationary and floating baseload, as well as stand-by applications. Worldwide deliveries of our liquid-fuelled power plants exceed 28 GW.
Modular design
The modular design of our oil power plants enables fast-track delivery anywhere in the world. Our 100 MW power plant can be in commercial operation in as little as nine months from order placement.
Prefabricated, functionally pretested modules guarantee consistent quality and performance. Site installation is simply a matter of assembling and connecting the modules.
Smaller initial investment
As your needs change you can change the plant size stepwise by adding or removing generator sets. This means you can get started with a smaller initial investment.
|
|
DIESEL POWER PLANT 2 STROKE
Two stroke low speed diesel engines are used for base load power generation in large utilities or in Independent Power Producer (IPP) plants. 2-stroke diesel engines are ideal for power plants of up to the 400 MW range.
DIESEL POWER PLANT 4 STROKE
Four-Stroke medium speed diesel engines are mainly used for power generation into smaller electrical grids, in remote areas, in fast track development projects, or for industrial purposes such as auto-producer.
|
|
| ... products without technical information |
| |
SCOTC Oil tank to control
Description:
- Controller level/temperature.
- Tanks including opening of filling and air filter.
Advantages:
- Reduction of the obstruction of the tanks: 4 functions in 1!
- A simple adjustment of the points of commutation via the menu
- An analogical exit
- A protected control
- Reduction of the logistic costs, assembly and maintenance
Applications:
- Control of level/temperature of hydraulic tanks.
|
|
| ... products without technical information |
| |
DYNAMIC series
Power class: 65-370 kWOil-free compressed air at the best possible cost-benefit ratio! The DYNAMIC series offers an oil-free, two-stage turbocompressor series in the power output range of 65 to 370 kW with volumetric flow rates of between 9.7 and 65.5 m³/min and 9-bar final compressing pressure.
The DYNAMIC series is particularly suitable for applications in the medium to large industry sector, for example petrochemicals, refineries, the steel and automotive industries. In other words, wherever an even and extemely reliable compressed air supply is required; and particularly economical to boot!
Advantages:
100% oil-free compressed air
Clearly defined operating costs
Extremely low energy costs for plant operation
Very compact design with extremely high delivery quantity
User-friendly micro processor control
Minimum maintenance cost
Available as an open system or in a sound-insulated version
|
|
The compressors are designed as fully integrated, compact silenced packages with drive motor, coolers, moisture drains, reverse osmosis system and filtration along with a controller to ensure optimum efficiency and reliability. The Full Feature versions include the integration of environmentally friendly refrigerant dryers to ensure compliance with your air quality requirements and make the best use of your valuable floor space.
The Integrated frequency converter of the AQ VSD series varies the speed of the drive motor in order to exactly match the changes in your compressed air demand, thus using the minimum amount of energy and more than justifying the additional investment.
|
|
The SF scroll series relies on a radically new technology, ensuring economy in operation, extremely quiet running, minimum servicing and space saving, thanks to its simplicity and compact design. It is equipped with a highly efficient IP55 class F electric motor.
These compressors have a minimum of maintenance requirements, 10,000 running hours practically without maintenance while intermediate routine operations remain restricted and easy to perform.
|
|
|
Food, pharmaceutical processes which require an air without any oil trace. From 1,5 to 900 kw, the compressors Atlas Copco bring a sure solution. Ranges Z with not lubricated screws are certfiées ISO 8573-1 Classe O attesting the complete absence of oil in the produced air.
|
|
The SF scroll series relies on a radically new technology, ensuring economy in operation, extremely quiet running, minimum servicing and space saving, thanks to its simplicity and compact design. It is equipped with a highly efficient IP55 class F electric motor.
These compressors have a minimum of maintenance requirements, 10,000 running hours practically without maintenance while intermediate routine operations remain restricted and easy to perform.
|
|
Analyze Up To 2 Samples A Minute
Today, there are numerous requirements for the analysis of oil based materials. Some of the more frequently employed include: the measurement of wear metals in lubricating oils, the measurement of additive packages in lubricating oils and the measurement of the elemental content of edible oils. Although the specific requirements of each of these analysis are quite different, the analytical approach used is very similar.
Typically, laboratories interested in measuring the elemental constituents of edible oils have fairly conservative sample analysis requirements; perhaps only 10 to 100 samples per day. Most of these labs chose the Profile Plus Oil Analyzer for this application.
Laboratories for which the primary application is the analysis of wear metals often have extreme sample throughput demands; often in excess of 1,000 samples per day. High throughput wear metals labs typically chose one of our simultaneous oil analyzers, such as the Profile HT or Prodigy HT for this task. A system like the Profile HT is capable of analyzing in excess of 2 samples per minute.
|
|
Leakwise Oil on Water Monitor
Leakwise Oil on Water MonitorLeakwise Oil-on-Water Monitoring and Detection Systems from GE Analytical Instruments provide early, reliable, low maintenance warning of hydrocarbon leaks and spills 24/7 without false alarms. A Leakwise system consists of a wire or wireless signal processor and one of more sensors, depending on the application.
Leakwise oil detection sensors use high frequency electromagnetic energy absorption floating sensors, which enable reliable monitoring of hydrocarbon on water regardless of dirt or oil coating of the sensor or change in water level or water salinity. Advantages include:
%u2022 Provides reliable coverage 24/7 with no false alarms
%u2022 Operates virtually maintenance free for years
%u2022 Detects oil layer thickness (as little as 0.3 mm)
%u2022 Offers an affordable solution for oil leak detection
Applications include oil leak monitoring at refineries, petrochemical plants, pipelines, gas stations, power plants, underground transmission, remote substations, transformer switchyards, marine ports, airports, steel and aluminum manufacturing plants, offshore rigs, groundwater and stormwater runoff, wastewater treatment plants and more.
Leakwise is also an ideal tool for strengthening Spill Prevention Control and Countermeasure (SPCC) plans, as required by the USEPA.
|
|
|
Oleotrol is an automatic alarm system for water streams which operates continuously so as to prevent damages from oil leaks. It uses a physical property-light reflection from a film of oil on the water surface - to signal small amounts of oil in water streams which are normally oil-free.
|
|
Model 6600 Oil-in-Water Analyzer System
Teledyne's Model 660/661 was the industry standard in oil-in-water analysis for 30 years. The microprocessor based 6600 / 6610 improves upon our proven analog circuitry and the sample handling system. The new, compact modern design incorporates many new features at a significantly reduced cost. Critical features include:
Folded optical system optimized for excellent signal-to-noise ratio and stability
Increased reliability by eliminating many moving parts
New sonicator homogenizes oil (in-line) in water instantly (less than one second)
Improved auto-zero filter system prepares zero fluid for calibration and zeroing without long sparging cycle
Specially developed software with auto calibration features
Automatic self-cleaning sample cell suitable for high pressure and temperature
Manual calibrations done easily with collected zero fluid from sample system using the gravity fed reservoir
Manual or automatic span sensitivity easily checked with internal span flag once field calibrated
Faster response time
Modular design configured to meet specific application requirements
|
|
| ... products without technical information |
| |
The strong point of the threephase model OIL 440 is that it can separate the vacuumed swarf and liquid and return the filtered liquid to the machine tool where it can be used again.
The machine is equipped with an ejection pump , so the liquid can be expelled during the vacuuming operations, in this way using the vacuum is fast and efficient ("E" version) in the same time.
|
|
Thanks to the 40-years of experience in this specific industry, RIBO designs and manufactures reliable and robust industrial vacuum cleaners, partcularly fit for all the cleaning and maintenace operations of metal working/cutting machines.
In fact, RIBO industrial vacuum cleaners can vacuum solid and liquid materials, also simultaneously, allowing to pre-separate materials inside the container, in order to facilitate wasting/recovering operations of vacuumed materials.
Reaffirming the well-established characteristics of QUALITY, RELIABILITY and ROBUSTNESS, RIBO gives to its machines 3 YEARS WARRANTY for single-phase machines and 5 YEARS WARRANTY for three-phase machines.
|
|
|
The Tecnoil range is especially designed to suck up, clean and recycle the oil and coolant on machine tools. Single and three-phase models from 3 to 15 HP, capacities from 150 to 700 litres.
|
|
- Power: between 6 and 11 kW
- Air flow: 660 to 1220 m3/h
- Vacuum: 5700 to 6500 mm/CE
- Filtering surface: 12 to 32m²
- Capacity: 100L
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
