|
|
Zero Up Programmable Power Supplies, 200W/400W/800W
- Constant voltage/constant current
- Built-in RS232 and RS485 interface
- An embedded microprocessor controller
- Digital encoder knob
- Software calibration
- Last setting memory
- Parallel operation (Master/Slave) active current sharing
- External voltage or resistance programming
- Voltage up to 120V, current up to 132A
- Active power factor correction: 99%
- 85~265VAC universal input voltage
- 19" rack mounted ATE and OEM
- Worldwide safety agency approvals
- CD Mark for LVD and EMC Regulations
|
|
|
Operating as a constant voltage power supply, the 105 is very simple to use. The adjustment knob and hi–lo range switch control the output, which is variable in 10-volt increments from 20 to 250 volts. One, two-position switch toggles the bright LED display from indicating output voltage to output current. The 105 is equipped with an over current detector for maximum safety. Like all Thermo products, the 105 is protected by our four-year warranty.
|
|
Linear Modules, Voltage and Current sources, DC power supply
High quality Power Supplies
Safety transformer with split bobbin
Protected against all overload and short circuit conditions
CE
|
|
Power Supply module NT250
- Power supply of modules via backplane
- Supply voltage: 18 .. 34 VDC
- Monitoring of supply voltage
- Power-fail signal for processor module
- Galvanic isolation
- Output power: 45 W
- Buffer time: 10 ms
|
|
With focus on the industrial and traction inverter market the PrimePACK™ IGBT Module is the new trendsetter in the power range up to several megawatts. Also for renewable energies and commercial agriculture vehicles (CAV) the PrimePACK™ module match to highest reliability and lifetime demand. Intelligent chip layout and well-engineered busbar construction offers a smart solution with optimized heat spread and lowest stray inductance. Due to slim shape of the module baseplate a reduced cooling area is needed. Latest mounting technologie of the PrimePACK™ IGBT Module allows automized assembly steps which reduce the system costs significant.
Our contribution to your success at the glance:
* Improved thermal properties
* Low stray inductance
* Wide range of operating temperatures
* Integrated NTC with high isolation
* 600A/1200V-modules with SiC-Diodes and fast-switching IGBT2 available
|
|
SPH1013 and SPH500 power supplies with 72V
Our new, robust and highly-efficient DC-Power Super Slim power supplies improve the performance of your drive applications. Use the parallel switching facility offered by these modules to boost output.
SPH1013-4821 + SPH1013-7214
* Input: 3 x 340 - 550VAC
* 1000 watts - Output: 48V + 72V
* Power Boost up to 200 %
* Parallel switchable with back feeding voltage
* wall or DIN-rail mountable
* 24V model also available
|
|
|
|
|
|
Characteristics
DC Power Supplies R&S NGSM are versatile supply and measuring units for testing electronic car components by simulating real operating conditions. In addition to a wide field of car electronics, it can be used in mobile radio, car hifi applications and mechanical engineering. Due to its compact design, the units take up only one half 19" width. A 19" adapter is available for mounting the R&S NGSM into test racks.
Application-specific characteristics
Car electronics
R&S NGSM is a precise and, thanks to its versatility, an extremely economical tool for use in the production of electronics. With the aid of an IEC/IEEE bus or RS-232-C interface (optional), the power supply can readily be integrated into in-line production systems. The startup curve in line with DIN40839 can be adapted to other factory standards by reprogramming it. High surge currents typically occur in applications such as central lock-ing or ABS, but with a pulse current of up to 30 A, R&S NGSM32/10 is ideally prepared for these applications.
Mobile radio systems
The high resolution for current measurements allows the maximum operating time of a mobile phone to be accurately predicted; typical voltage drops during the startup of a car - which have to be tolarated by telephones operated at a car net can be simulated.
DC Power Supply R&S NGSM is insensitive to the RF voltage conducted from a device under test or radiated from a nearby antenna.
|
|
|
Power Management IC solutions ranging from standard ICs to high performance plug-in, power brick, digital power and integrated power modules.
|
|
SM800 - Series
800 W, Bench, Programmable System
DC power supply
NEW
* High quality Power Supplies, designed for long life at full load
* Protected against all overload and short circuit conditions
* Very stable voltage or current 5.10-5 - 10.10-5
* EMC: class B for Generic Emission. Can be used safely near sensitive equipment
* Accurate voltage and current control by 10 turn potentiometers
* Potmeters optionally replaced by digital encoders
* Programmable by Analog voltage, Isolated analog, Ethernet, RS232 or IEEE488
* Sequencer option, for both waveform generation and stand-alone automation
* CE
* High Speed Programming versions available for ATE, Laser Diodes
* 2 Autoranging (AR) versions, doubles voltage and current range
* Power Sink Option: 2 Quadrant operation for PWM motor testing or fast down programming in ATE systems
|
|
|
|
|
|
XHR provides 1000 watts of programmable DC power in a compact half-rack package. It is available in eighteen 1 kW models. Its unique features and size make XHR ideal for OEM applications where high power and wide adjustment of output voltage or current is required, and a compact half-rack configuration is advantageous.
It is stackable with a small foot print, front panel binding post connectors and a low current requirement that allows it to be plugged into a standard 120 VAC, 15 A circuit. State-of-the-art zero voltage or "soft" switching technology virtually eliminates switching transients for high efficiency, low noise and high reliability. XHR is also power-factor-corrected for low current draw (only 11 A at 120 VAC for 1000 watts) and reduced generation of input current harmonics.
The half-rack XHR is ideal as a "companion" for another half-rack instrument in a test system equipment console, eliminating the need for a blank panel while preserving vertical rack space. With a choice of rear and/or front panel connectors, XHR offers added system flexibility.
|
|
|
A range of multi function products specifically designed to suit the requirements of all combined heat and power, co-generation, diesel and gas engine generator applications. This high quality product portfolio offers the generator set manufacturer and panel builder a flexible mix of contemporary and traditional products, including a comprehensive range of generator set controllers, integrated digital power metering, and a one stop solution package of measurement, protection and control instrumentation.
|
|
Model ORION-D4602P
460W+460W mini-redundant switching power supply with active PFC
Mini-redundant power supply suitable for 2U/4U and larger chassis
Active PFC, full-range input
Two independent AC inputs
Model ORION-B3502
350W 2U ATX redundant power supply with active PFC
Low profile power supply, suitable for 2U and node chassis
Dual ATX 12V power connector for dual Intel® Xeon processor based server board, ROBO-8820VG2
Active PFC, full range input
Total output power of +5V, +3.3V and +12V is 328W
Model ORION-A4001
400W 1U ATX power supply with active PFC
Low profile power supply suitable for 1U and node chassis
Active PFC, full-range input
Support for dual Intel® Xeon™ processors
Total output of +5V and +3.3V is 50A
Max. +5V standby output is 2A
|
|
|
Vibra-Metrics designs and manufactures a wide variety of single and multi-channel low noise, portable battery powered accelerometer power supplies, as well as line powered units designed for lab use, rack mount, and a variety of applications. Many connector options are available to insure the flexibility you would expect from V-M products. For specifications click any series number.
|
|
- Input fuse protection
- 100 % thermally protected.
- Floating output, continuously short circuit and open circuit
proof.
|
|
In order to meet demands for complete, comprehensive system solutions, power supplies for mounting rail installation are available in the B&R product line. This extensive spectrum ranges from 2.1 A single-phase up to three-phase power supplies which can supply 40 A. All switching power supplies can manage a wide range of AC and DC input voltages. This input ranges from 100 to 240 VAC or 400 to 500 VAC and from 85 to 375 VDC. Devices are protected against short-circuit, overload, and open-circuit which allows them to be operated without functional limitations or derating even when overloads between 15% and 25% occur.
|
|
In order to meet demands for complete, comprehensive system solutions, power supplies for mounting rail installation are available in the B&R product line. This extensive spectrum ranges from 2.1 A single-phase up to three-phase power supplies which can supply 40 A. All switching power supplies can manage a wide range of AC and DC input voltages. This input ranges from 100 to 240 VAC or 400 to 500 VAC and from 85 to 375 VDC. Devices are protected against short-circuit, overload, and open-circuit which allows them to be operated without functional limitations or derating even when overloads between 15% and 25% occur.
|
|
Performance:
The high-quality design of Comdel's XDC 1000 assures ultra reliability, while the small size fits easily into your system. What's more, with the XDC's flexible options and controls, you don't need to purchase a new power supply every time you make a change in your system. Current and voltage control capabilities are standard with each supply.
Applications:
Comdel's XDC is the ideal supply for reactive PVD sputtering, DC Bias and hard-coating applications.
Features:
Compact, lightweight, 3 1/2" rack-mount DC generator
Accurate output control by voltage or current
Self-limiting circuitry that eliminates short-circuit failures
Low stored energy that reduces arc damage
Front Panel, continuously variable control of output voltage and current
Calculated MTBF: 30,000 hrs. minimum
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power. In addition to the new 10W and 15W, there are also 30W, 60W, 90W, 120W and 240W models available. With all these choices, it’s easy to find the one that’s right for your application!
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power. In addition to the new 10W and 15W, there are also 30W, 60W, 90W, 120W and 240W models available. With all these choices, it’s easy to find the one that’s right for your application!
|
|
|
The MN-2PS40 is an unregulated, linear DC power supply that provides 40VDC to the ControlPoint network. This supply is ruggedly constructed, with de-rated components to ensure long life and reliable operation; built-in fusing prevents damage due to prolonged overloading or short circuits. The extruded case provides various mounting configurations.
|
|
|
With the ability to accept worldwide ac input voltages using eight different ac input cords and worldwide safety agency approvals, the NP family is the top choice in rectifiers. The NP family consists of a wide variety of scalable 48V building blocks including the NP0800, NP1200, NP1500, and NP2500 and a 24V building block, the NP1300. The NP0800, NP1200 and the NP1500 are 2 RU tall, while the NP1300 and the NP12500 are 3 RU tall. The rectifiers and shelf are also NEBS approved. Rapid customization of the rectifiers is possible with the use of Network Protocol Cards (NPC). A complementary shelf is also available that holds up to three modules.
|
|
In the area of suppression modules for contactors, valves and motors, we offer the corresponding components to increase EMC throughout the whole installation. We can meet all normal requirements in the field of power supplies with our power supply units, incorporating primary switching technology and control-power transformers.
Interface technology is represented in the Lutze programme by a wide range of different components that can be used to create just about any interface needed in your application.
Lütze Power Supply Units: Filtered, single-phase and three-phase; All power supplies carry UL-CSA approval; Layout according to EN 61558-2-6 or EN 61000-3-2 and 3-3; 100% ED at nominal load up to 60ºC.
Lütze Primary Switched Power Supplies: Single-, two- and three-phase; Universal usage thanks to wide-range input 85-550V; Versions for 2-,5-,10-,20- and 40 A, with Power Boost function; Overload or shutdown function; Snap-fit on 35mm DIN rail; PFC.
|
|
Single Phase Power Supplies
Based on the experience we have built over the past 30 years, we are offering a wide range of power supplies which provide many features to meet customer requirements. We have compact standard Power Supplies and as well versions with display, which provide additional information such as maintenance forecast monitoring, or total run time, both with under-voltage alarm. The slim housing features two under-voltage alarms which indicate lifetime. Last but not least, we offer our modular power supply with multiple configurations and features.
Three Phase
The 3-phase power supplies are available from 120W up to 960W at 24VDC. The key features of this family are the slim and compact housing and its high efficiency. All with natural ventilation.
|
|
TELE is your reliable source of DC power
TELE offers you a wide range of power supplies with a variety of voltages and functions together with very high efficiency, covering compact DC supplies, installation-type units and regulated switch-mode power supplies. The regulated switch-mode power supplies provide a wide input voltage range and electronic short-circuit protection against overloading.
|
|
Transformers and power supplies are important links in the supply of power to automation systems. They are the core of each and every switchgear cabinet.
In the supply of power to electronic modules cabinet a control voltage of 24 V DC has become generally established around the world as the power supply for all electric modules. But other voltages are still in use. The power supply must be chosen with extreme care, because it is crucial for the reliable functioning of all the components it supplies.
Over many years Weidmüller´s power supplies have proven themselves in the supply of power to electronic modules. They are CE certified and comply with the requirements of DIN EN 50081-1 and DIN EN 50082-2 (EN 61000-6-2 with effect from 1st April 2002). This means that they can be used in adverse industrial environments, small-scale industrial installations and also in residential areas.
|
|
PS24V8AG-110 and PS42V6AG-110
• Enclosed linear unregulated power supplies
• PC-type AC power cord
• 4 pin AMP connector on output
• Internally fused on both primary and secondary side
• Toroid transformer for minimal voltage drop and minimal EMI
Includes 1, KITDC1- connector kits
SHUNT42V100W
• Provides protection against Back EMF
• Automatically gates on at >49 VDC
• 27 Ohm 100 Watt Resistance
• Connects in parallel with above enclosed power supplies
• Pin-out is same as enclosed power supplies
• Dimensions are same as enclosed power supplies
The SHUNT42V100W can be inserted between the DC power supply and the SmartMotor to monitor the power voltage. If the voltage exceeds the threshold, the shunt gates on to clamp the voltage to safe level.
This is designed for the 42V supplies but it can also be used for 24V supplies.
Includes 2, KITDC1- connector kits
Use with cable CBLDC1
|
|
|
|
